On Apache
Under GNU General Public License
2012-05-25 21:33 @38.107.179.236 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
util(3NCURSES) util(3NCURSES)
NAME
delay_output, filter, flushinp, getwin, key_name, keyname, nofilter, putwin, unctrl,
use_env, wunctrl - miscellaneous curses utility routines
SYNOPSIS
#include <curses.h>
char *unctrl(chtype c);
wchar_t *wunctrl(cchar_t *c);
char *keyname(int c);
char *key_name(wchar_t w);
void filter(void);
void nofilter(void);
void use_env(bool f);
int putwin(WINDOW *win, FILE *filep);
WINDOW *getwin(FILE *filep);
int delay_output(int ms);
int flushinp(void);
DESCRIPTION
The unctrl routine returns a character string which is a printable representation of the
character c, ignoring attributes. Control characters are displayed in the ^X notation.
Printing characters are displayed as is. The corresponding wunctrl returns a printable
representation of a wide-character.
The keyname routine returns a character string corresponding to the key c:
- Printable characters are displayed as themselves, e.g., a one-character string con-
taining the key.
- Control characters are displayed in the ^X notation.
- DEL (character 127) is displayed as ^?.
- Values above 128 are either meta characters (if the screen has not been initialized,
or if meta has been called with a TRUE parameter), shown in the M-X notation, or are
displayed as themselves. In the latter case, the values may not be printable; this
follows the X/Open specification.
- Values above 256 may be the names of the names of function keys.
- Otherwise (if there is no corresponding name) the function returns null, to denote
an error. X/Open also lists an "UNKNOWN KEY" return value, which some implementa-
tions return rather than null.
The corresponding key_name returns a character string corresponding to the wide-character
value w. The two functions do not return the same set of strings; the latter returns null
where the former would display a meta character.
The filter routine, if used, must be called before initscr or newterm are called. The ef-
fect is that, during those calls, LINES is set to 1; the capabilities clear, cup, cud,
cud1, cuu1, cuu, vpa are disabled; and the home string is set to the value of cr.
The nofilter routine cancels the effect of a preceding filter call. That allows the
caller to initialize a screen on a different device, using a different value of $TERM.
The limitation arises because the filter routine modifies the in-memory copy of the termi-
nal information.
The use_env routine, if used, is called before initscr or newterm are called. When called
with FALSE as an argument, the values of lines and columns specified in the terminfo
database will be used, even if environment variables LINES and COLUMNS (used by default)
are set, or if curses is running in a window (in which case default behavior would be to
use the window size if LINES and COLUMNS are not set). Note that setting LINES or COLUMNS
overrides the corresponding size which may be obtained from the operating system.
The putwin routine writes all data associated with window win into the file to which filep
points. This information can be later retrieved using the getwin function.
The getwin routine reads window related data stored in the file by putwin. The routine
then creates and initializes a new window using that data. It returns a pointer to the
new window.
The delay_output routine inserts an ms millisecond pause in output. This routine should
not be used extensively because padding characters are used rather than a CPU pause. If
no padding character is specified, this uses napms to perform the delay.
The flushinp routine throws away any typeahead that has been typed by the user and has not
yet been read by the program.
RETURN VALUE
Except for flushinp, routines that return an integer return ERR upon failure and OK (SVr4
specifies only "an integer value other than ERR") upon successful completion.
Routines that return pointers return NULL on error.
X/Open does not define any error conditions. In this implementation
flushinp
returns an error if the terminal was not initialized.
meta returns an error if the terminal was not initialized.
putwin
returns an error if the associated fwrite calls return an error.
PORTABILITY
The XSI Curses standard, Issue 4 describes these functions. It states that unctrl and
wunctrl will return a null pointer if unsuccessful, but does not define any error condi-
tions. This implementation checks for three cases:
- the parameter is a 7-bit US-ASCII code. This is the case that X/Open Curses
documented.
- the parameter is in the range 128-159, i.e., a C1 control code. If use_lega-
cy_coding has been called with a 2 parameter, unctrl returns the parameter,
i.e., a one-character string with the parameter as the first character. Oth-
erwise, it returns ``~@'', ``~A'', etc., analogous to ``^@'', ``^A'', C0 con-
trols.
X/Open Curses does not document whether unctrl can be called before initializ-
ing curses. This implementation permits that, and returns the ``~@'', etc.,
values in that case.
- parameter values outside the 0 to 255 range. unctrl returns a null pointer.
The SVr4 documentation describes the action of filter only in the vaguest terms. The de-
scription here is adapted from the XSI Curses standard (which erroneously fails to de-
scribe the disabling of cuu).
The strings returned by unctrl in this implementation are determined at compile time,
showing C1 controls from the upper-128 codes with a `~' prefix rather than `^'. Other im-
plementations have different conventions. For example, they may show both sets of control
characters with `^', and strip the parameter to 7 bits. Or they may ignore C1 controls
and treat all of the upper-128 codes as printable. This implementation uses 8 bits but
does not modify the string to reflect locale. The use_legacy_coding function allows the
caller to change the output of unctrl.
Likewise, the meta function allows the caller to change the output of keyname, i.e., it
determines whether to use the `M-' prefix for ``meta'' keys (codes in the range 128 to
255). Both use_legacy_coding and meta succeed only after curses is initialized. X/Open
Curses does not document the treatment of codes 128 to 159. When treating them as
``meta'' keys (or if keyname is called before initializing curses), this implementation
returns strings ``M-^@'', ``M-^A'', etc.
The keyname function may return the names of user-defined string capabilities which are
defined in the terminfo entry via the -x option of tic. This implementation automatically
assigns at run-time keycodes to user-defined strings which begin with "k". The keycodes
start at KEY_MAX, but are not guaranteed to be the same value for different runs because
user-defined codes are merged from all terminal descriptions which have been loaded. The
use_extended_names function controls whether this data is loaded when the terminal de-
scription is read by the library.
The nofilter routine is specific to ncurses. It was not supported on Version 7, BSD or
System V implementations. It is recommended that any code depending on ncurses extensions
be conditioned using NCURSES_VERSION.
SEE ALSO
legacy_coding(3NCURSES), ncurses(3NCURSES), initscr(3NCURSES), kernel(3NCURSES),
scr_dump(3NCURSES), legacy_coding(3NCURSES).
util(3NCURSES)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2012-05-25 21:33 @38.107.179.236 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)