On Apache
Under GNU General Public License
2012-05-25 18:24 @38.107.179.240 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
E2FSCK(8) E2FSCK(8)
NAME
e2fsck - check a Linux ext2/ext3 file system
SYNOPSIS
e2fsck [ -pacnyrdfkvtDFV ] [ -b superblock ] [ -B blocksize ] [ -l|-L bad_blocks_file ] [
-C fd ] [ -j external-journal ] [ -E extended_options ] device
DESCRIPTION
e2fsck is used to check a Linux second extended file system (ext2fs). E2fsck also sup-
ports ext2 filesystems containing a journal, which are also sometimes known as ext3
filesystems, by first applying the journal to the filesystem before continuing with normal
e2fsck processing. After the journal has been applied, a filesystem will normally be
marked as clean. Hence, for ext3 filesystems, e2fsck will normally run the journal and
exit, unless its superblock indicates that further checking is required.
device is the device file where the filesystem is stored (e.g. /dev/hdc1).
Note that in general it is not safe to run e2fsck on mounted filesystems. The only excep-
tion is if the -n option is specified, and -c, -l, or -L options are not specified. How-
ever, even if it is safe to do so, the results printed by e2fsck are not valid if the
filesystem is mounted. If e2fsck asks whether or not you should check a filesystem which
is mounted, the only correct answer is ``no''. Only experts who really know what they are
doing should consider answering this question in any other way.
OPTIONS
-a This option does the same thing as the -p option. It is provided for backwards
compatibility only; it is suggested that people use -p option whenever possible.
-b superblock
Instead of using the normal superblock, use an alternative superblock specified by
superblock. This option is normally used when the primary superblock has been cor-
rupted. The location of the backup superblock is dependent on the filesystem's
blocksize. For filesystems with 1k blocksizes, a backup superblock can be found at
block 8193; for filesystems with 2k blocksizes, at block 16384; and for 4k block-
sizes, at block 32768.
Additional backup superblocks can be determined by using the mke2fs program using
the -n option to print out where the superblocks were created. The -b option to
mke2fs, which specifies blocksize of the filesystem must be specified in order for
the superblock locations that are printed out to be accurate.
If an alternative superblock is specified and the filesystem is not opened read-
only, e2fsck will make sure that the primary superblock is updated appropriately
upon completion of the filesystem check.
-B blocksize
Normally, e2fsck will search for the superblock at various different block sizes in
an attempt to find the appropriate block size. This search can be fooled in some
cases. This option forces e2fsck to only try locating the superblock at a particu-
lar blocksize. If the superblock is not found, e2fsck will terminate with a fatal
error.
-c This option causes e2fsck to use badblocks(8) program to do a read-only scan of the
device in order to find any bad blocks. If any bad blocks are found, they are
added to the bad block inode to prevent them from being allocated to a file or
directory. If this option is specified twice, then the bad block scan will be done
using a non-destructive read-write test.
-C fd This option causes e2fsck to write completion information to the specified file
descriptor so that the progress of the filesystem check can be monitored. This
option is typically used by programs which are running e2fsck. If the file
descriptor number is negative, then absolute value of the file descriptor will be
used, and the progress information will be suppressed initially. It can later be
enabled by sending the e2fsck process a SIGUSR1 signal. If the file descriptor
specified is 0, e2fsck will print a completion bar as it goes about its business.
This requires that e2fsck is running on a video console or terminal.
-d Print debugging output (useless unless you are debugging e2fsck).
-D Optimize directories in filesystem. This option causes e2fsck to try to optimize
all directories, either by reindexing them if the filesystem supports directory
indexing, or by sorting and compressing directories for smaller directories, or
for filesystems using traditional linear directories.
Even without the -D option, e2fsck may sometimes optimize a few directories --- for
example, if directory indexing is enabled and a directory is not indexed and would
benefit from being indexed, or if the index structures are corrupted and need to be
rebuilt. The -D option forces all directories in the filesystem to be optimized.
This can sometimes make them a little smaller and slightly faster to search, but in
practice, you should rarely need to use this option.
The -D option will detect directory entries with duplicate names in a single direc-
tory, which e2fsck normally does not enforce for performance reasons.
-E extended_options
Set e2fsck extended options. Extended options are comma separated, and may take an
argument using the equals ('=') sign. The following options are supported:
ea_ver=extended_attribute_version
Set the version of the extended attribute blocks which e2fsck will
require while checking the filesystem. The version number may be 1 or
2. The default extended attribute version format is 2.
fragcheck
During pass 1, print a detailed report of any discontiguous blocks for
files in the filesystem.
-f Force checking even if the file system seems clean.
-F Flush the filesystem device's buffer caches before beginning. Only really useful
for doing e2fsck time trials.
-j external-journal
Set the pathname where the external-journal for this filesystem can be found.
-k When combined with the -c option, any existing bad blocks in the bad blocks list
are preserved, and any new bad blocks found by running badblocks(8) will be added
to the existing bad blocks list.
-l filename
Add the block numbers listed in the file specified by filename to the list of bad
blocks. The format of this file is the same as the one generated by the bad-
blocks(8) program. Note that the block numbers are based on the blocksize of the
filesystem. Hence, badblocks(8) must be given the blocksize of the filesystem in
order to obtain correct results. As a result, it is much simpler and safer to use
the -c option to e2fsck, since it will assure that the correct parameters are
passed to the badblocks program.
-L filename
Set the bad blocks list to be the list of blocks specified by filename. (This
option is the same as the -l option, except the bad blocks list is cleared before
the blocks listed in the file are added to the bad blocks list.)
-n Open the filesystem read-only, and assume an answer of `no' to all questions.
Allows e2fsck to be used non-interactively. (Note: if the -c, -l, or -L options
are specified in addition to the -n option, then the filesystem will be opened
read-write, to permit the bad-blocks list to be updated. However, no other changes
will be made to the filesystem.) This option may not be specified at the same time
as the -p or -y options.
-p Automatically repair ("preen") the file system. This option will cause e2fsck to
automatically fix any filesystem problems that can be safely fixed without human
intervention. If e2fsck discovers a problem which may require the system adminis-
trator to take additional corrective action, e2fsck will print a description of the
problem and then exit with the value 4 logically or'ed into the exit code. (See
the EXIT CODE section.) This option is normally used by the system's boot scripts.
It may not be specified at the same time as the -n or -y options.
-r This option does nothing at all; it is provided only for backwards compatibility.
-t Print timing statistics for e2fsck. If this option is used twice, additional tim-
ing statistics are printed on a pass by pass basis.
-v Verbose mode.
-V Print version information and exit.
-y Assume an answer of `yes' to all questions; allows e2fsck to be used non-interac-
tively. This option may not be specified at the same time as the -n or -p options.
EXIT CODE
The exit code returned by e2fsck is the sum of the following conditions:
0 - No errors
1 - File system errors corrected
2 - File system errors corrected, system should
be rebooted
4 - File system errors left uncorrected
8 - Operational error
16 - Usage or syntax error
32 - E2fsck canceled by user request
128 - Shared library error
SIGNALS
The following signals have the following effect when sent to e2fsck.
SIGUSR1
This signal causes e2fsck to start displaying a completion bar or emitting progress
information. (See discussion of the -C option.)
SIGUSR2
This signal causes e2fsck to stop displaying a completion bar or emitting progress
information.
REPORTING BUGS
Almost any piece of software will have bugs. If you manage to find a filesystem which
causes e2fsck to crash, or which e2fsck is unable to repair, please report it to the
author.
Please include as much information as possible in your bug report. Ideally, include a
complete transcript of the e2fsck run, so I can see exactly what error messages are dis-
played. (Make sure the messages printed by e2fsck are in English; if your system has been
configured so that e2fsck's messages have been translated into another language, please
set the the LC_ALL environment variable to C so that the transcript of e2fsck's output
will be useful to me.) If you have a writable filesystem where the transcript can be
stored, the script(1) program is a handy way to save the output of e2fsck to a file.
It is also useful to send the output of dumpe2fs(8). If a specific inode or inodes seems
to be giving e2fsck trouble, try running the debugfs(8) command and send the output of the
stat(1u) command run on the relevant inode(s). If the inode is a directory, the debugfs
dump command will allow you to extract the contents of the directory inode, which can sent
to me after being first run through uuencode(1). The most useful data you can send to
help reproduce the bug is a compressed raw image dump of the filesystem, generated using
e2image(8). See the e2image(8) man page for more details.
Always include the full version string which e2fsck displays when it is run, so I know
which version you are running.
AUTHOR
This version of e2fsck was written by Theodore Ts'o <tytso AT mit.edu>.
SEE ALSO
e2fsck.conf(5), badblocks(8), dumpe2fs(8), debugfs(8), e2image(8), mke2fs(8), tune2fs(8)
E2fsprogs version 1.41.3 October 2008 E2FSCK(8)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2012-05-25 18:24 @38.107.179.240 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)