On Apache
Under GNU General Public License
2012-05-25 18:57 @38.107.179.237 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
GIT-BISECT(1) Git Manual GIT-BISECT(1)
NAME
git-bisect - Find by binary search the change that introduced a bug
SYNOPSIS
git bisect <subcommand> <options>
DESCRIPTION
The command takes various subcommands, and different options depending on the subcommand:
git bisect help
git bisect start [<bad> [<good>...]] [--] [<paths>...]
git bisect bad [<rev>]
git bisect good [<rev>...]
git bisect skip [(<rev>|<range>)...]
git bisect reset [<commit>]
git bisect visualize
git bisect replay <logfile>
git bisect log
git bisect run <cmd>...
This command uses git rev-list --bisect to help drive the binary search process to find
which change introduced a bug, given an old "good" commit object name and a later "bad"
commit object name.
Getting help
Use "git bisect" to get a short usage description, and "git bisect help" or "git bisect
-h" to get a long usage description.
Basic bisect commands: start, bad, good
Using the Linux kernel tree as an example, basic use of the bisect command is as follows:
$ git bisect start
$ git bisect bad # Current version is bad
$ git bisect good v2.6.13-rc2 # v2.6.13-rc2 was the last version
# tested that was good
When you have specified at least one bad and one good version, the command bisects the
revision tree and outputs something similar to the following:
Bisecting: 675 revisions left to test after this
The state in the middle of the set of revisions is then checked out. You would now compile
that kernel and boot it. If the booted kernel works correctly, you would then issue the
following command:
$ git bisect good # this one is good
The output of this command would be something similar to the following:
Bisecting: 337 revisions left to test after this
You keep repeating this process, compiling the tree, testing it, and depending on whether
it is good or bad issuing the command "git bisect good" or "git bisect bad" to ask for the
next bisection.
Eventually there will be no more revisions left to bisect, and you will have been left
with the first bad kernel revision in "refs/bisect/bad".
Bisect reset
After a bisect session, to clean up the bisection state and return to the original HEAD,
issue the following command:
$ git bisect reset
By default, this will return your tree to the commit that was checked out before git
bisect start. (A new git bisect start will also do that, as it cleans up the old bisection
state.)
With an optional argument, you can return to a different commit instead:
$ git bisect reset <commit>
For example, git bisect reset HEAD will leave you on the current bisection commit and
avoid switching commits at all, while git bisect reset bisect/bad will check out the first
bad revision.
Bisect visualize
To see the currently remaining suspects in gitk, issue the following command during the
bisection process:
$ git bisect visualize
view may also be used as a synonym for visualize.
If the DISPLAY environment variable is not set, git log is used instead. You can also give
command line options such as -p and --stat.
$ git bisect view --stat
Bisect log and bisect replay
After having marked revisions as good or bad, issue the following command to show what has
been done so far:
$ git bisect log
If you discover that you made a mistake in specifying the status of a revision, you can
save the output of this command to a file, edit it to remove the incorrect entries, and
then issue the following commands to return to a corrected state:
$ git bisect reset
$ git bisect replay that-file
Avoiding testing a commit
If, in the middle of a bisect session, you know that the next suggested revision is not a
good one to test (e.g. the change the commit introduces is known not to work in your
environment and you know it does not have anything to do with the bug you are chasing),
you may want to find a nearby commit and try that instead.
For example:
$ git bisect good/bad # previous round was good or bad.
Bisecting: 337 revisions left to test after this
$ git bisect visualize # oops, that is uninteresting.
$ git reset --hard HEAD~3 # try 3 revisions before what
# was suggested
Then compile and test the chosen revision, and afterwards mark the revision as good or bad
in the usual manner.
Bisect skip
Instead of choosing by yourself a nearby commit, you can ask git to do it for you by
issuing the command:
$ git bisect skip # Current version cannot be tested
But git may eventually be unable to tell the first bad commit among a bad commit and one
or more skipped commits.
You can even skip a range of commits, instead of just one commit, using the
"<commit1>..<commit2>" notation. For example:
$ git bisect skip v2.5..v2.6
This tells the bisect process that no commit after v2.5, up to and including v2.6, should
be tested.
Note that if you also want to skip the first commit of the range you would issue the
command:
$ git bisect skip v2.5 v2.5..v2.6
This tells the bisect process that the commits between v2.5 included and v2.6 included
should be skipped.
Cutting down bisection by giving more parameters to bisect start
You can further cut down the number of trials, if you know what part of the tree is
involved in the problem you are tracking down, by specifying path parameters when issuing
the bisect start command:
$ git bisect start -- arch/i386 include/asm-i386
If you know beforehand more than one good commit, you can narrow the bisect space down by
specifying all of the good commits immediately after the bad commit when issuing the
bisect start command:
$ git bisect start v2.6.20-rc6 v2.6.20-rc4 v2.6.20-rc1 --
# v2.6.20-rc6 is bad
# v2.6.20-rc4 and v2.6.20-rc1 are good
Bisect run
If you have a script that can tell if the current source code is good or bad, you can
bisect by issuing the command:
$ git bisect run my_script arguments
Note that the script (my_script in the above example) should exit with code 0 if the
current source code is good, and exit with a code between 1 and 127 (inclusive), except
125, if the current source code is bad.
Any other exit code will abort the bisect process. It should be noted that a program that
terminates via "exit(-1)" leaves $? = 255, (see the exit(3) manual page), as the value is
chopped with "& 0377".
The special exit code 125 should be used when the current source code cannot be tested. If
the script exits with this code, the current revision will be skipped (see git bisect skip
above).
You may often find that during a bisect session you want to have temporary modifications
(e.g. s/#define DEBUG 0/#define DEBUG 1/ in a header file, or "revision that does not have
this commit needs this patch applied to work around another problem this bisection is not
interested in") applied to the revision being tested.
To cope with such a situation, after the inner git bisect finds the next revision to test,
the script can apply the patch before compiling, run the real test, and afterwards decide
if the revision (possibly with the needed patch) passed the test and then rewind the tree
to the pristine state. Finally the script should exit with the status of the real test to
let the "git bisect run" command loop determine the eventual outcome of the bisect
session.
EXAMPLES
o Automatically bisect a broken build between v1.2 and HEAD:
$ git bisect start HEAD v1.2 -- # HEAD is bad, v1.2 is good
$ git bisect run make # "make" builds the app
o Automatically bisect a test failure between origin and HEAD:
$ git bisect start HEAD origin -- # HEAD is bad, origin is good
$ git bisect run make test # "make test" builds and tests
o Automatically bisect a broken test suite:
$ cat ~/test.sh
#!/bin/sh
make || exit 125 # this skips broken builds
make test # "make test" runs the test suite
$ git bisect start v1.3 v1.1 -- # v1.3 is bad, v1.1 is good
$ git bisect run ~/test.sh
Here we use a "test.sh" custom script. In this script, if "make" fails, we skip the
current commit.
It is safer to use a custom script outside the repository to prevent interactions
between the bisect, make and test processes and the script.
"make test" should "exit 0", if the test suite passes, and "exit 1" otherwise.
o Automatically bisect a broken test case:
$ cat ~/test.sh
#!/bin/sh
make || exit 125 # this skips broken builds
~/check_test_case.sh # does the test case passes ?
$ git bisect start HEAD HEAD~10 -- # culprit is among the last 10
$ git bisect run ~/test.sh
Here "check_test_case.sh" should "exit 0" if the test case passes, and "exit 1"
otherwise.
It is safer if both "test.sh" and "check_test_case.sh" scripts are outside the
repository to prevent interactions between the bisect, make and test processes and the
scripts.
o Automatically bisect a broken test suite:
$ git bisect start HEAD HEAD~10 -- # culprit is among the last 10
$ git bisect run sh -c "make || exit 125; ~/check_test_case.sh"
Does the same as the previous example, but on a single line.
AUTHOR
Written by Linus Torvalds <torvalds AT osdl.org[1]>
DOCUMENTATION
Documentation by Junio C Hamano and the git-list <git AT vger.org[2]>.
SEE ALSO
Fighting regressions with git bisect[3], git-blame(1).
GIT
Part of the git(1) suite
NOTES
1. torvalds AT osdl.org
mailto:torvalds AT osdl.org
2. git AT vger.org
mailto:git AT vger.org
3. Fighting regressions with git bisect
git-bisect-lk2009.html
Git 1.7.1.1 06/30/2010 GIT-BISECT(1)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2012-05-25 18:57 @38.107.179.237 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)