On Apache
Under GNU General Public License
2012-05-25 19:24 @38.107.179.239 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
GIT-REV-LIST(1) Git Manual GIT-REV-LIST(1)
NAME
git-rev-list - Lists commit objects in reverse chronological order
SYNOPSIS
git rev-list [ --max-count=number ]
[ --skip=number ]
[ --max-age=timestamp ]
[ --min-age=timestamp ]
[ --sparse ]
[ --merges ]
[ --no-merges ]
[ --first-parent ]
[ --remove-empty ]
[ --full-history ]
[ --not ]
[ --all ]
[ --branches[=pattern] ]
[ --tags[=pattern] ]
[ --remotes[=pattern] ]
[ --glob=glob-pattern ]
[ --stdin ]
[ --quiet ]
[ --topo-order ]
[ --parents ]
[ --timestamp ]
[ --left-right ]
[ --cherry-pick ]
[ --encoding[=<encoding>] ]
[ --(author|committer|grep)=<pattern> ]
[ --regexp-ignore-case | -i ]
[ --extended-regexp | -E ]
[ --fixed-strings | -F ]
[ --date={local|relative|default|iso|rfc|short} ]
[ [--objects | --objects-edge] [ --unpacked ] ]
[ --pretty | --header ]
[ --bisect ]
[ --bisect-vars ]
[ --bisect-all ]
[ --merge ]
[ --reverse ]
[ --walk-reflogs ]
[ --no-walk ] [ --do-walk ]
<commit>... [ -- <paths>... ]
DESCRIPTION
List commits that are reachable by following the parent links from the given commit(s),
but exclude commits that are reachable from the one(s) given with a ^ in front of them.
The output is given in reverse chronological order by default.
You can think of this as a set operation. Commits given on the command line form a set of
commits that are reachable from any of them, and then commits reachable from any of the
ones given with ^ in front are subtracted from that set. The remaining commits are what
comes out in the command's output. Various other options and paths parameters can be used
to further limit the result.
Thus, the following command:
$ git rev-list foo bar ^baz
means "list all the commits which are reachable from foo or bar, but not from baz".
A special notation "<commit1>..<commit2>" can be used as a short-hand for "^<commit1>
<commit2>". For example, either of the following may be used interchangeably:
$ git rev-list origin..HEAD
$ git rev-list HEAD ^origin
Another special notation is "<commit1>...<commit2>" which is useful for merges. The
resulting set of commits is the symmetric difference between the two operands. The
following two commands are equivalent:
$ git rev-list A B --not $(git merge-base --all A B)
$ git rev-list A...B
rev-list is a very essential git command, since it provides the ability to build and
traverse commit ancestry graphs. For this reason, it has a lot of different options that
enables it to be used by commands as different as git bisect and git repack.
OPTIONS
Commit Formatting
Using these options, git-rev-list(1) will act similar to the more specialized family of
commit log tools: git-log(1), git-show(1), and git-whatchanged(1)
--pretty[=<format>], --format[=<format>]
Pretty-print the contents of the commit logs in a given format, where <format> can be
one of oneline, short, medium, full, fuller, email, raw and format:<string>. See the
"PRETTY FORMATS" section for some additional details for each format. When omitted,
the format defaults to medium.
Note: you can specify the default pretty format in the repository configuration (see
git-config(1)).
--abbrev-commit
Instead of showing the full 40-byte hexadecimal commit object name, show only a
partial prefix. Non default number of digits can be specified with "--abbrev=<n>"
(which also modifies diff output, if it is displayed).
This should make "--pretty=oneline" a whole lot more readable for people using
80-column terminals.
--oneline
This is a shorthand for "--pretty=oneline --abbrev-commit" used together.
--encoding[=<encoding>]
The commit objects record the encoding used for the log message in their encoding
header; this option can be used to tell the command to re-code the commit log message
in the encoding preferred by the user. For non plumbing commands this defaults to
UTF-8.
--no-notes, --show-notes[=<ref>]
Show the notes (see git-notes(1)) that annotate the commit, when showing the commit
log message. This is the default for git log, git show and git whatchanged commands
when there is no --pretty, --format nor --oneline option is given on the command line.
With an optional argument, add this ref to the list of notes. The ref is taken to be
in refs/notes/ if it is not qualified.
--[no-]standard-notes
Enable or disable populating the notes ref list from the core.notesRef and
notes.displayRef variables (or corresponding environment overrides). Enabled by
default. See git-config(1).
--relative-date
Synonym for --date=relative.
--date={relative,local,default,iso,rfc,short,raw}
Only takes effect for dates shown in human-readable format, such as when using
"--pretty". log.date config variable sets a default value for log command's --date
option.
--date=relative shows dates relative to the current time, e.g. "2 hours ago".
--date=local shows timestamps in user's local timezone.
--date=iso (or --date=iso8601) shows timestamps in ISO 8601 format.
--date=rfc (or --date=rfc2822) shows timestamps in RFC 2822 format, often found in
E-mail messages.
--date=short shows only date but not time, in YYYY-MM-DD format.
--date=raw shows the date in the internal raw git format %s %z format.
--date=default shows timestamps in the original timezone (either committer's or
author's).
--header
Print the contents of the commit in raw-format; each record is separated with a NUL
character.
--parents
Print the parents of the commit. Also enables parent rewriting, see History
Simplification below.
--children
Print the children of the commit. Also enables parent rewriting, see History
Simplification below.
--timestamp
Print the raw commit timestamp.
--left-right
Mark which side of a symmetric diff a commit is reachable from. Commits from the left
side are prefixed with < and those from the right with >. If combined with --boundary,
those commits are prefixed with -.
For example, if you have this topology:
y---b---b branch B
/ \ /
/ .
/ / \
o---x---a---a branch A
you would get an output like this:
$ git rev-list --left-right --boundary --pretty=oneline A...B
>bbbbbbb... 3rd on b
>bbbbbbb... 2nd on b
<aaaaaaa... 3rd on a
<aaaaaaa... 2nd on a
-yyyyyyy... 1st on b
-xxxxxxx... 1st on a
--graph
Draw a text-based graphical representation of the commit history on the left hand side
of the output. This may cause extra lines to be printed in between commits, in order
for the graph history to be drawn properly.
This implies the --topo-order option by default, but the --date-order option may also
be specified.
Commit Limiting
Besides specifying a range of commits that should be listed using the special notations
explained in the description, additional commit limiting may be applied.
-n number, --max-count=<number>
Limit the number of commits output.
--skip=<number>
Skip number commits before starting to show the commit output.
--since=<date>, --after=<date>
Show commits more recent than a specific date.
--until=<date>, --before=<date>
Show commits older than a specific date.
--max-age=<timestamp>, --min-age=<timestamp>
Limit the commits output to specified time range.
--author=<pattern>, --committer=<pattern>
Limit the commits output to ones with author/committer header lines that match the
specified pattern (regular expression).
--grep=<pattern>
Limit the commits output to ones with log message that matches the specified pattern
(regular expression).
--all-match
Limit the commits output to ones that match all given --grep, --author and --committer
instead of ones that match at least one.
-i, --regexp-ignore-case
Match the regexp limiting patterns without regard to letters case.
-E, --extended-regexp
Consider the limiting patterns to be extended regular expressions instead of the
default basic regular expressions.
-F, --fixed-strings
Consider the limiting patterns to be fixed strings (don't interpret pattern as a
regular expression).
--remove-empty
Stop when a given path disappears from the tree.
--merges
Print only merge commits.
--no-merges
Do not print commits with more than one parent.
--first-parent
Follow only the first parent commit upon seeing a merge commit. This option can give a
better overview when viewing the evolution of a particular topic branch, because
merges into a topic branch tend to be only about adjusting to updated upstream from
time to time, and this option allows you to ignore the individual commits brought in
to your history by such a merge.
--not
Reverses the meaning of the ^ prefix (or lack thereof) for all following revision
specifiers, up to the next --not.
--all
Pretend as if all the refs in refs/ are listed on the command line as <commit>.
--branches[=pattern]
Pretend as if all the refs in refs/heads are listed on the command line as <commit>.
If pattern is given, limit branches to ones matching given shell glob. If pattern
lacks ?, , or [, / at the end is implied.
--tags[=pattern]
Pretend as if all the refs in refs/tags are listed on the command line as <commit>. If
pattern is given, limit tags to ones matching given shell glob. If pattern lacks ?, ,
or [, / at the end is implied.
--remotes[=pattern]
Pretend as if all the refs in refs/remotes are listed on the command line as <commit>.
If `pattern`is given, limit remote tracking branches to ones matching given shell
glob. If pattern lacks ?, , or [, / at the end is implied.
--glob=glob-pattern
Pretend as if all the refs matching shell glob glob-pattern are listed on the command
line as <commit>. Leading refs/, is automatically prepended if missing. If pattern
lacks ?, , or [, / at the end is implied.
--stdin
In addition to the <commit> listed on the command line, read them from the standard
input. If a -- separator is seen, stop reading commits and start reading paths to
limit the result.
--quiet
Don't print anything to standard output. This form is primarily meant to allow the
caller to test the exit status to see if a range of objects is fully connected (or
not). It is faster than redirecting stdout to /dev/null as the output does not have to
be formatted.
--cherry-pick
Omit any commit that introduces the same change as another commit on the "other side"
when the set of commits are limited with symmetric difference. For example, if you
have two branches, A and B, a usual way to list all commits on only one side of them
is with --left-right, like the example above in the description of that option. It
however shows the commits that were cherry-picked from the other branch (for example,
"3rd on b" may be cherry-picked from branch A). With this option, such pairs of
commits are excluded from the output.
-g, --walk-reflogs
Instead of walking the commit ancestry chain, walk reflog entries from the most recent
one to older ones. When this option is used you cannot specify commits to exclude
(that is, ^commit, commit1..commit2, nor commit1...commit2 notations cannot be used).
With --pretty format other than oneline (for obvious reasons), this causes the output
to have two extra lines of information taken from the reflog. By default, commit@{Nth}
notation is used in the output. When the starting commit is specified as commit@{now},
output also uses commit@{timestamp} notation instead. Under --pretty=oneline, the
commit message is prefixed with this information on the same line. This option cannot
be combined with --reverse. See also git-reflog(1).
--merge
After a failed merge, show refs that touch files having a conflict and don't exist on
all heads to merge.
--boundary
Output uninteresting commits at the boundary, which are usually not shown.
History Simplification
Sometimes you are only interested in parts of the history, for example the commits
modifying a particular <path>. But there are two parts of History Simplification, one part
is selecting the commits and the other is how to do it, as there are various strategies to
simplify the history.
The following options select the commits to be shown:
<paths>
Commits modifying the given <paths> are selected.
--simplify-by-decoration
Commits that are referred by some branch or tag are selected.
Note that extra commits can be shown to give a meaningful history.
The following options affect the way the simplification is performed:
Default mode
Simplifies the history to the simplest history explaining the final state of the tree.
Simplest because it prunes some side branches if the end result is the same (i.e.
merging branches with the same content)
--full-history
As the default mode but does not prune some history.
--dense
Only the selected commits are shown, plus some to have a meaningful history.
--sparse
All commits in the simplified history are shown.
--simplify-merges
Additional option to --full-history to remove some needless merges from the resulting
history, as there are no selected commits contributing to this merge.
A more detailed explanation follows.
Suppose you specified foo as the <paths>. We shall call commits that modify foo !TREESAME,
and the rest TREESAME. (In a diff filtered for foo, they look different and equal,
respectively.)
In the following, we will always refer to the same example history to illustrate the
differences between simplification settings. We assume that you are filtering for a file
foo in this commit graph:
.-A---M---N---O---P
/ / / / /
I B C D E
\ / / / /
`-------------'
The horizontal line of history A--P is taken to be the first parent of each merge. The
commits are:
o I is the initial commit, in which foo exists with contents "asdf", and a file quux
exists with contents "quux". Initial commits are compared to an empty tree, so I is
!TREESAME.
o In A, foo contains just "foo".
o B contains the same change as A. Its merge M is trivial and hence TREESAME to all
parents.
o C does not change foo, but its merge N changes it to "foobar", so it is not TREESAME
to any parent.
o D sets foo to "baz". Its merge O combines the strings from N and D to "foobarbaz";
i.e., it is not TREESAME to any parent.
o E changes quux to "xyzzy", and its merge P combines the strings to "quux xyzzy".
Despite appearing interesting, P is TREESAME to all parents.
rev-list walks backwards through history, including or excluding commits based on whether
--full-history and/or parent rewriting (via --parents or --children) are used. The
following settings are available.
Default mode
Commits are included if they are not TREESAME to any parent (though this can be
changed, see --sparse below). If the commit was a merge, and it was TREESAME to one
parent, follow only that parent. (Even if there are several TREESAME parents, follow
only one of them.) Otherwise, follow all parents.
This results in:
.-A---N---O
/ /
I---------D
Note how the rule to only follow the TREESAME parent, if one is available, removed B
from consideration entirely. C was considered via N, but is TREESAME. Root commits
are compared to an empty tree, so I is !TREESAME.
Parent/child relations are only visible with --parents, but that does not affect the
commits selected in default mode, so we have shown the parent lines.
--full-history without parent rewriting
This mode differs from the default in one point: always follow all parents of a merge,
even if it is TREESAME to one of them. Even if more than one side of the merge has
commits that are included, this does not imply that the merge itself is! In the
example, we get
I A B N D O
P and M were excluded because they are TREESAME to a parent. E, C and B were all
walked, but only B was !TREESAME, so the others do not appear.
Note that without parent rewriting, it is not really possible to talk about the
parent/child relationships between the commits, so we show them disconnected.
--full-history with parent rewriting
Ordinary commits are only included if they are !TREESAME (though this can be changed,
see --sparse below).
Merges are always included. However, their parent list is rewritten: Along each
parent, prune away commits that are not included themselves. This results in
.-A---M---N---O---P
/ / / / /
I B / D /
\ / / / /
`-------------'
Compare to --full-history without rewriting above. Note that E was pruned away because
it is TREESAME, but the parent list of P was rewritten to contain E's parent I. The
same happened for C and N. Note also that P was included despite being TREESAME.
In addition to the above settings, you can change whether TREESAME affects inclusion:
--dense
Commits that are walked are included if they are not TREESAME to any parent.
--sparse
All commits that are walked are included.
Note that without --full-history, this still simplifies merges: if one of the parents
is TREESAME, we follow only that one, so the other sides of the merge are never
walked.
Finally, there is a fourth simplification mode available:
--simplify-merges
First, build a history graph in the same way that --full-history with parent rewriting
does (see above).
Then simplify each commit C to its replacement C' in the final history according to
the following rules:
o Set C' to C.
o Replace each parent P of C' with its simplification P'. In the process, drop
parents that are ancestors of other parents, and remove duplicates.
o If after this parent rewriting, C' is a root or merge commit (has zero or >1
parents), a boundary commit, or !TREESAME, it remains. Otherwise, it is replaced
with its only parent.
The effect of this is best shown by way of comparing to --full-history with parent
rewriting. The example turns into:
.-A---M---N---O
/ / /
I B D
\ / /
`---------'
Note the major differences in N and P over --full-history:
o N's parent list had I removed, because it is an ancestor of the other parent M.
Still, N remained because it is !TREESAME.
o P's parent list similarly had I removed. P was then removed completely, because
it had one parent and is TREESAME.
The --simplify-by-decoration option allows you to view only the big picture of the
topology of the history, by omitting commits that are not referenced by tags. Commits are
marked as !TREESAME (in other words, kept after history simplification rules described
above) if (1) they are referenced by tags, or (2) they change the contents of the paths
given on the command line. All other commits are marked as TREESAME (subject to be
simplified away).
Bisection Helpers
--bisect
Limit output to the one commit object which is roughly halfway between included and
excluded commits. Note that the bad bisection ref refs/bisect/bad is added to the
included commits (if it exists) and the good bisection refs refs/bisect/good-* are
added to the excluded commits (if they exist). Thus, supposing there are no refs in
refs/bisect/, if
$ git rev-list --bisect foo ^bar ^baz
outputs midpoint, the output of the two commands
$ git rev-list foo ^midpoint
$ git rev-list midpoint ^bar ^baz
would be of roughly the same length. Finding the change which introduces a regression is
thus reduced to a binary search: repeatedly generate and test new 'midpoint's until the
commit chain is of length one.
--bisect-vars
This calculates the same as --bisect, except that refs in refs/bisect/ are not used,
and except that this outputs text ready to be eval'ed by the shell. These lines will
assign the name of the midpoint revision to the variable bisect_rev, and the expected
number of commits to be tested after bisect_rev is tested to bisect_nr, the expected
number of commits to be tested if bisect_rev turns out to be good to bisect_good, the
expected number of commits to be tested if bisect_rev turns out to be bad to
bisect_bad, and the number of commits we are bisecting right now to bisect_all.
--bisect-all
This outputs all the commit objects between the included and excluded commits, ordered
by their distance to the included and excluded commits. Refs in refs/bisect/ are not
used. The farthest from them is displayed first. (This is the only one displayed by
--bisect.)
This is useful because it makes it easy to choose a good commit to test when you want
to avoid to test some of them for some reason (they may not compile for example).
This option can be used along with --bisect-vars, in this case, after all the sorted
commit objects, there will be the same text as if --bisect-vars had been used alone.
Commit Ordering
By default, the commits are shown in reverse chronological order.
--topo-order
This option makes them appear in topological order (i.e. descendant commits are shown
before their parents).
--date-order
This option is similar to --topo-order in the sense that no parent comes before all of
its children, but otherwise things are still ordered in the commit timestamp order.
--reverse
Output the commits in reverse order. Cannot be combined with --walk-reflogs.
Object Traversal
These options are mostly targeted for packing of git repositories.
--objects
Print the object IDs of any object referenced by the listed commits. --objects foo
^bar thus means "send me all object IDs which I need to download if I have the commit
object bar, but not foo".
--objects-edge
Similar to --objects, but also print the IDs of excluded commits prefixed with a "-"
character. This is used by git-pack-objects(1) to build "thin" pack, which records
objects in deltified form based on objects contained in these excluded commits to
reduce network traffic.
--unpacked
Only useful with --objects; print the object IDs that are not in packs.
--no-walk
Only show the given revs, but do not traverse their ancestors.
--do-walk
Overrides a previous --no-walk.
PRETTY FORMATS
If the commit is a merge, and if the pretty-format is not oneline, email or raw, an
additional line is inserted before the Author: line. This line begins with "Merge: " and
the sha1s of ancestral commits are printed, separated by spaces. Note that the listed
commits may not necessarily be the list of the direct parent commits if you have limited
your view of history: for example, if you are only interested in changes related to a
certain directory or file.
Here are some additional details for each format:
o oneline
<sha1> <title line>
This is designed to be as compact as possible.
o short
commit <sha1>
Author: <author>
<title line>
o medium
commit <sha1>
Author: <author>
Date: <author date>
<title line>
<full commit message>
o full
commit <sha1>
Author: <author>
Commit: <committer>
<title line>
<full commit message>
o fuller
commit <sha1>
Author: <author>
AuthorDate: <author date>
Commit: <committer>
CommitDate: <committer date>
<title line>
<full commit message>
o email
From <sha1> <date>
From: <author>
Date: <author date>
Subject: [PATCH] <title line>
<full commit message>
o raw
The raw format shows the entire commit exactly as stored in the commit object.
Notably, the SHA1s are displayed in full, regardless of whether --abbrev or
--no-abbrev are used, and parents information show the true parent commits, without
taking grafts nor history simplification into account.
o format:<string>
The format:<string> format allows you to specify which information you want to show.
It works a little bit like printf format, with the notable exception that you get a
newline with %n instead of \n.
E.g, format:"The author of %h was %an, %ar%nThe title was >>%s<<%n" would show
something like this:
The author of fe6e0ee was Junio C Hamano, 23 hours ago
The title was >>t4119: test autocomputing -p<n> for traditional diff input.<<
The placeholders are:
o %H: commit hash
o %h: abbreviated commit hash
o %T: tree hash
o %t: abbreviated tree hash
o %P: parent hashes
o %p: abbreviated parent hashes
o %an: author name
o %aN: author name (respecting .mailmap, see git-shortlog(1) or git-blame(1))
o %ae: author email
o %aE: author email (respecting .mailmap, see git-shortlog(1) or git-blame(1))
o %ad: author date (format respects --date= option)
o %aD: author date, RFC2822 style
o %ar: author date, relative
o %at: author date, UNIX timestamp
o %ai: author date, ISO 8601 format
o %cn: committer name
o %cN: committer name (respecting .mailmap, see git-shortlog(1) or git-blame(1))
o %ce: committer email
o %cE: committer email (respecting .mailmap, see git-shortlog(1) or git-blame(1))
o %cd: committer date
o %cD: committer date, RFC2822 style
o %cr: committer date, relative
o %ct: committer date, UNIX timestamp
o %ci: committer date, ISO 8601 format
o %d: ref names, like the --decorate option of git-log(1)
o %e: encoding
o %s: subject
o %f: sanitized subject line, suitable for a filename
o %b: body
o %N: commit notes
o %gD: reflog selector, e.g., refs/stash@{1}
o %gd: shortened reflog selector, e.g., stash@{1}
o %gs: reflog subject
o %Cred: switch color to red
o %Cgreen: switch color to green
o %Cblue: switch color to blue
o %Creset: reset color
o %C(...): color specification, as described in color.branch.* config option
o %m: left, right or boundary mark
o %n: newline
o %%: a raw %
o %x00: print a byte from a hex code
o %w([<w>[,<i1>[,<i2>]]]): switch line wrapping, like the -w option of git-
shortlog(1).
Note
Some placeholders may depend on other options given to the revision traversal engine. For
example, the %g* reflog options will insert an empty string unless we are traversing
reflog entries (e.g., by git log -g). The %d placeholder will use the "short" decoration
format if --decorate was not already provided on the command line.
If you add a + (plus sign) after % of a placeholder, a line-feed is inserted immediately
before the expansion if and only if the placeholder expands to a non-empty string.
If you add a - (minus sign) after % of a placeholder, line-feeds that immediately precede
the expansion are deleted if and only if the placeholder expands to an empty string.
o tformat:
The tformat: format works exactly like format:, except that it provides "terminator"
semantics instead of "separator" semantics. In other words, each commit has the
message terminator character (usually a newline) appended, rather than a separator
placed between entries. This means that the final entry of a single-line format will
be properly terminated with a new line, just as the "oneline" format does. For
example:
$ git log -2 --pretty=format:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973 -- NO NEWLINE
$ git log -2 --pretty=tformat:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973
In addition, any unrecognized string that has a % in it is interpreted as if it has
tformat: in front of it. For example, these two are equivalent:
$ git log -2 --pretty=tformat:%h 4da45bef
$ git log -2 --pretty=%h 4da45bef
AUTHOR
Written by Linus Torvalds <torvalds AT osdl.org[1]>
DOCUMENTATION
Documentation by David Greaves, Junio C Hamano, Jonas Fonseca and the git-list
<git AT vger.org[2]>.
GIT
Part of the git(1) suite
NOTES
1. torvalds AT osdl.org
mailto:torvalds AT osdl.org
2. git AT vger.org
mailto:git AT vger.org
Git 1.7.1.1 06/30/2010 GIT-REV-LIST(1)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2012-05-25 19:24 @38.107.179.239 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)