On Apache
Under GNU General Public License
2012-05-25 23:58 @38.107.179.236 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
HEADER_CHECKS(5) HEADER_CHECKS(5)
NAME
header_checks - Postfix built-in content inspection
SYNOPSIS
header_checks = pcre:/etc/postfix/header_checks
mime_header_checks = pcre:/etc/postfix/mime_header_checks
nested_header_checks = pcre:/etc/postfix/nested_header_checks
body_checks = pcre:/etc/postfix/body_checks
postmap -q "string" pcre:/etc/postfix/filename
postmap -q - pcre:/etc/postfix/filename <inputfile
DESCRIPTION
This document describes access control on the content of message headers and message body
lines; it is implemented by the Postfix cleanup(8) server before mail is queued. See
access(5) for access control on remote SMTP client information.
Each message header or message body line is compared against a list of patterns. When a
match is found the corresponding action is executed, and the matching process is repeated
for the next message header or message body line.
For examples, see the EXAMPLES section at the end of this manual page.
Postfix header or body_checks are designed to stop a flood of mail from worms or viruses;
they do not decode attachments, and they do not unzip archives. See the documents refer-
enced below in the README FILES section if you need more sophisticated content analysis.
Postfix supports four built-in content inspection classes:
header_checks
These are applied to initial message headers (except for the headers that are pro-
cessed with mime_header_checks).
mime_header_checks (default: $header_checks)
These are applied to MIME related message headers only.
This feature is available in Postfix 2.0 and later.
nested_header_checks (default: $header_checks)
These are applied to message headers of attached email messages (except for the
headers that are processed with mime_header_checks).
This feature is available in Postfix 2.0 and later.
body_checks
These are applied to all other content, including multi-part message boundaries.
With Postfix versions before 2.0, all content after the initial message headers is
treated as body content.
Note: message headers are examined one logical header at a time, even when a message
header spans multiple lines. Body lines are always examined one line at a time.
COMPATIBILITY
With Postfix version 2.2 and earlier specify "postmap -fq" to query a table that contains
case sensitive patterns. By default, regexp: and pcre: patterns are case insensitive.
TABLE FORMAT
This document assumes that header and body_checks rules are specified in the form of Post-
fix regular expression lookup tables. Usually the best performance is obtained with pcre
(Perl Compatible Regular Expression) tables, but the slower regexp (POSIX regular expres-
sions) support is more widely available. Use the command "postconf -m" to find out what
lookup table types your Postfix system supports.
The general format of Postfix regular expression tables is given below. For a discussion
of specific pattern or flags syntax, see pcre_table(5) or regexp_table(5), respectively.
/pattern/flags action
When /pattern/ matches the input string, execute the corresponding action. See
below for a list of possible actions.
!/pattern/flags action
When /pattern/ does not match the input string, execute the corresponding action.
if /pattern/flags
endif Match the input string against the patterns between if and endif, if and only if
the same input string also matches /pattern/. The if..endif can nest.
Note: do not prepend whitespace to patterns inside if..endif.
if !/pattern/flags
endif Match the input string against the patterns between if and endif, if and only if
the same input string does not match /pattern/. The if..endif can nest.
blank lines and comments
Empty lines and whitespace-only lines are ignored, as are lines whose first non-
whitespace character is a `#'.
multi-line text
A pattern/action line starts with non-whitespace text. A line that starts with
whitespace continues a logical line.
TABLE SEARCH ORDER
For each line of message input, the patterns are applied in the order as specified in the
table. When a pattern is found that matches the input line, the corresponding action is
executed and then the next input line is inspected.
TEXT SUBSTITUTION
Substitution of substrings from the matched expression into the action string is possible
using the conventional Perl syntax ($1, $2, etc.). The macros in the result string may
need to be written as ${n} or $(n) if they aren't followed by whitespace.
Note: since negated patterns (those preceded by !) return a result when the expression
does not match, substitutions are not available for negated patterns.
ACTIONS
Action names are case insensitive. They are shown in upper case for consistency with other
Postfix documentation.
DISCARD optional text...
Claim successful delivery and silently discard the message. Log the optional text
if specified, otherwise log a generic message.
Note: this action disables further header or body_checks inspection of the current
message and affects all recipients. To discard only one recipient without discard-
ing the entire message, use the transport(5) table to direct mail to the discard(8)
service.
This feature is available in Postfix 2.0 and later.
DUNNO Pretend that the input line did not match any pattern, and inspect the next input
line. This action can be used to shorten the table search.
For backwards compatibility reasons, Postfix also accepts OK but it is (and always
has been) treated as DUNNO.
This feature is available in Postfix 2.1 and later.
FILTER transport:destination
Write a content filter request to the queue file, and inspect the next input line.
After the complete message is received it will be sent through the specified exter-
nal content filter. More information about external content filters is in the
Postfix FILTER_README file.
Note: this action overrides the content_filter setting, and affects all recipients
of the message. In the case that multiple FILTER actions fire, only the last one is
executed.
This feature is available in Postfix 2.0 and later.
HOLD optional text...
Arrange for the message to be placed on the hold queue, and inspect the next input
line. The message remains on hold until someone either deletes it or releases it
for delivery. Log the optional text if specified, otherwise log a generic message.
Mail that is placed on hold can be examined with the postcat(1) command, and can be
destroyed or released with the postsuper(1) command.
Note: use "postsuper -r" to release mail that was kept on hold for a significant
fraction of $maximal_queue_lifetime or $bounce_queue_lifetime, or longer. Use
"postsuper -H" only for mail that will not expire within a few delivery attempts.
Note: this action affects all recipients of the message.
This feature is available in Postfix 2.0 and later.
IGNORE Delete the current line from the input, and inspect the next input line.
PREPEND text...
Prepend one line with the specified text, and inspect the next input line.
Notes:
o The prepended text is output on a separate line, immediately before the
input that triggered the PREPEND action.
o The prepended text is not considered part of the input stream: it is not
subject to header/body checks or address rewriting, and it does not affect
the way that Postfix adds missing message headers.
o When prepending text before a message header line, the prepended text must
begin with a valid message header label.
o This action cannot be used to prepend multi-line text.
This feature is available in Postfix 2.1 and later.
REDIRECT user@domain
Write a message redirection request to the queue file, and inspect the next input
line. After the message is queued, it will be sent to the specified address instead
of the intended recipient(s).
Note: this action overrides the FILTER action, and affects all recipients of the
message. If multiple REDIRECT actions fire, only the last one is executed.
This feature is available in Postfix 2.1 and later.
REPLACE text...
Replace the current line with the specified text, and inspect the next input line.
This feature is available in Postfix 2.2 and later. The description below applies
to Postfix 2.2.2 and later.
Notes:
o When replacing a message header line, the replacement text must begin with a
valid header label.
o The replaced text remains part of the input stream. Unlike the result from
the PREPEND action, a replaced message header may be subject to address
rewriting and may affect the way that Postfix adds missing message headers.
REJECT optional text...
Reject the entire message. Reply with optional text... when the optional text is
specified, otherwise reply with a generic error message.
Note: this action disables further header or body_checks inspection of the current
message and affects all recipients.
Postfix version 2.3 and later support enhanced status codes. When no code is spec-
ified at the beginning of optional text..., Postfix inserts a default enhanced sta-
tus code of "5.7.1".
WARN optional text...
Log a warning with the optional text... (or log a generic message), and inspect the
next input line. This action is useful for debugging and for testing a pattern
before applying more drastic actions.
BUGS
Empty lines never match, because some map types mis-behave when given a zero-length search
string. This limitation may be removed for regular expression tables in a future release.
Many people overlook the main limitations of header and body_checks rules.
o These rules operate on one logical message header or one body line at a time. A
decision made for one line is not carried over to the next line.
o If text in the message body is encoded (RFC 2045) then the rules need to be speci-
fied for the encoded form.
o Likewise, when message headers are encoded (RFC 2047) then the rules need to be
specified for the encoded form.
Message headers added by the cleanup(8) daemon itself are excluded from inspection. Exam-
ples of such message headers are From:, To:, Message-ID:, Date:.
Message headers deleted by the cleanup(8) daemon will be examined before they are deleted.
Examples are: Bcc:, Content-Length:, Return-Path:.
CONFIGURATION PARAMETERS
body_checks
Lookup tables with content filter rules for message body lines. These filters see
one physical line at a time, in chunks of at most $line_length_limit bytes.
body_checks_size_limit
The amount of content per message body segment (attachment) that is subjected to
$body_checks filtering.
header_checks
mime_header_checks (default: $header_checks)
nested_header_checks (default: $header_checks)
Lookup tables with content filter rules for message header lines: respectively,
these are applied to the initial message headers (not including MIME headers), to
the MIME headers anywhere in the message, and to the initial headers of attached
messages.
Note: these filters see one logical message header at a time, even when a message
header spans multiple lines. Message headers that are longer than
$header_size_limit characters are truncated.
disable_mime_input_processing
While receiving mail, give no special treatment to MIME related message headers;
all text after the initial message headers is considered to be part of the message
body. This means that header_checks is applied to all the initial message headers,
and that body_checks is applied to the remainder of the message.
Note: when used in this manner, body_checks will process a multi-line message
header one line at a time.
EXAMPLES
Header pattern to block attachments with bad file name extensions.
/etc/postfix/main.cf:
header_checks = regexp:/etc/postfix/header_checks
/etc/postfix/header_checks:
/^content-(type|disposition):.*name[[:space:]]*=.*\.(exe|vbs)/
REJECT Bad attachment file name extension: $2
Body pattern to stop a specific HTML browser vulnerability exploit.
/etc/postfix/main.cf:
body_checks = regexp:/etc/postfix/body_checks
/etc/postfix/body_checks:
/^<iframe src=(3D)?cid:.* height=(3D)?0 width=(3D)?0>$/
REJECT IFRAME vulnerability exploit
SEE ALSO
cleanup(8), canonicalize and enqueue Postfix message
pcre_table(5), format of PCRE lookup tables
regexp_table(5), format of POSIX regular expression tables
postconf(1), Postfix configuration utility
postmap(1), Postfix lookup table management
postsuper(1), Postfix janitor
postcat(1), show Postfix queue file contents
RFC 2045, base64 and quoted-printable encoding rules
RFC 2047, message header encoding for non-ASCII text
README FILES
Use "postconf readme_directory" or "postconf html_directory" to locate this information.
DATABASE_README, Postfix lookup table overview
CONTENT_INSPECTION_README, Postfix content inspection overview
BUILTIN_FILTER_README, Postfix built-in content inspection
BACKSCATTER_README, blocking returned forged mail
LICENSE
The Secure Mailer license must be distributed with this software.
AUTHOR(S)
Wietse Venema
IBM T.J. Watson Research
P.O. Box 704
Yorktown Heights, NY 10598, USA
HEADER_CHECKS(5)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2012-05-25 23:58 @38.107.179.236 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)