On Apache
Under GNU General Public License
2012-05-26 01:35 @38.107.179.240 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
PERLFUNC(1) Perl Programmers Reference Guide PERLFUNC(1)
NAME
perlfunc - Perl builtin functions
DESCRIPTION
The functions in this section can serve as terms in an expression. They fall into two
major categories: list operators and named unary operators. These differ in their
precedence relationship with a following comma. (See the precedence table in perlop.)
List operators take more than one argument, while unary operators can never take more than
one argument. Thus, a comma terminates the argument of a unary operator, but merely
separates the arguments of a list operator. A unary operator generally provides a scalar
context to its argument, while a list operator may provide either scalar or list contexts
for its arguments. If it does both, the scalar arguments will be first, and the list
argument will follow. (Note that there can ever be only one such list argument.) For
instance, splice() has three scalar arguments followed by a list, whereas gethostbyname()
has four scalar arguments.
In the syntax descriptions that follow, list operators that expect a list (and provide
list context for the elements of the list) are shown with LIST as an argument. Such a
list may consist of any combination of scalar arguments or list values; the list values
will be included in the list as if each individual element were interpolated at that point
in the list, forming a longer single-dimensional list value. Commas should separate
elements of the LIST.
Any function in the list below may be used either with or without parentheses around its
arguments. (The syntax descriptions omit the parentheses.) If you use the parentheses,
the simple (but occasionally surprising) rule is this: It looks like a function, therefore
it is a function, and precedence doesn't matter. Otherwise it's a list operator or unary
operator, and precedence does matter. And whitespace between the function and left
parenthesis doesn't count--so you need to be careful sometimes:
print 1+2+4; # Prints 7.
print(1+2) + 4; # Prints 3.
print (1+2)+4; # Also prints 3!
print +(1+2)+4; # Prints 7.
print ((1+2)+4); # Prints 7.
If you run Perl with the -w switch it can warn you about this. For example, the third
line above produces:
print (...) interpreted as function at - line 1.
Useless use of integer addition in void context at - line 1.
A few functions take no arguments at all, and therefore work as neither unary nor list
operators. These include such functions as "time" and "endpwent". For example,
"time+86_400" always means "time() + 86_400".
For functions that can be used in either a scalar or list context, nonabortive failure is
generally indicated in a scalar context by returning the undefined value, and in a list
context by returning the null list.
Remember the following important rule: There is no rule that relates the behavior of an
expression in list context to its behavior in scalar context, or vice versa. It might do
two totally different things. Each operator and function decides which sort of value it
would be most appropriate to return in scalar context. Some operators return the length
of the list that would have been returned in list context. Some operators return the
first value in the list. Some operators return the last value in the list. Some
operators return a count of successful operations. In general, they do what you want,
unless you want consistency.
A named array in scalar context is quite different from what would at first glance appear
to be a list in scalar context. You can't get a list like "(1,2,3)" into being in scalar
context, because the compiler knows the context at compile time. It would generate the
scalar comma operator there, not the list construction version of the comma. That means
it was never a list to start with.
In general, functions in Perl that serve as wrappers for system calls of the same name
(like chown(2), fork(2), closedir(2), etc.) all return true when they succeed and "undef"
otherwise, as is usually mentioned in the descriptions below. This is different from the
C interfaces, which return "-1" on failure. Exceptions to this rule are "wait",
"waitpid", and "syscall". System calls also set the special $! variable on failure.
Other functions do not, except accidentally.
Perl Functions by Category
Here are Perl's functions (including things that look like functions, like some keywords
and named operators) arranged by category. Some functions appear in more than one place.
Functions for SCALARs or strings
"chomp", "chop", "chr", "crypt", "hex", "index", "lc", "lcfirst", "length", "oct",
"ord", "pack", "q//", "qq//", "reverse", "rindex", "sprintf", "substr", "tr///", "uc",
"ucfirst", "y///"
Regular expressions and pattern matching
"m//", "pos", "quotemeta", "s///", "split", "study", "qr//"
Numeric functions
"abs", "atan2", "cos", "exp", "hex", "int", "log", "oct", "rand", "sin", "sqrt",
"srand"
Functions for real @ARRAYs
"pop", "push", "shift", "splice", "unshift"
Functions for list data
"grep", "join", "map", "qw//", "reverse", "sort", "unpack"
Functions for real %HASHes
"delete", "each", "exists", "keys", "values"
Input and output functions
"binmode", "close", "closedir", "dbmclose", "dbmopen", "die", "eof", "fileno",
"flock", "format", "getc", "print", "printf", "read", "readdir", "rewinddir", "say",
"seek", "seekdir", "select", "syscall", "sysread", "sysseek", "syswrite", "tell",
"telldir", "truncate", "warn", "write"
Functions for fixed length data or records
"pack", "read", "syscall", "sysread", "syswrite", "unpack", "vec"
Functions for filehandles, files, or directories
"-X", "chdir", "chmod", "chown", "chroot", "fcntl", "glob", "ioctl", "link", "lstat",
"mkdir", "open", "opendir", "readlink", "rename", "rmdir", "stat", "symlink",
"sysopen", "umask", "unlink", "utime"
Keywords related to the control flow of your Perl program
"caller", "continue", "die", "do", "dump", "eval", "exit", "goto", "last", "next",
"redo", "return", "sub", "wantarray"
Keywords related to switch
"break", "continue", "given", "when", "default"
(These are only available if you enable the "switch" feature. See feature and "Switch
statements" in perlsyn.)
Keywords related to scoping
"caller", "import", "local", "my", "our", "state", "package", "use"
("state" is only available if the "state" feature is enabled. See feature.)
Miscellaneous functions
"defined", "dump", "eval", "formline", "local", "my", "our", "reset", "scalar",
"state", "undef", "wantarray"
Functions for processes and process groups
"alarm", "exec", "fork", "getpgrp", "getppid", "getpriority", "kill", "pipe", "qx//",
"setpgrp", "setpriority", "sleep", "system", "times", "wait", "waitpid"
Keywords related to perl modules
"do", "import", "no", "package", "require", "use"
Keywords related to classes and object-orientation
"bless", "dbmclose", "dbmopen", "package", "ref", "tie", "tied", "untie", "use"
Low-level socket functions
"accept", "bind", "connect", "getpeername", "getsockname", "getsockopt", "listen",
"recv", "send", "setsockopt", "shutdown", "socket", "socketpair"
System V interprocess communication functions
"msgctl", "msgget", "msgrcv", "msgsnd", "semctl", "semget", "semop", "shmctl",
"shmget", "shmread", "shmwrite"
Fetching user and group info
"endgrent", "endhostent", "endnetent", "endpwent", "getgrent", "getgrgid", "getgrnam",
"getlogin", "getpwent", "getpwnam", "getpwuid", "setgrent", "setpwent"
Fetching network info
"endprotoent", "endservent", "gethostbyaddr", "gethostbyname", "gethostent",
"getnetbyaddr", "getnetbyname", "getnetent", "getprotobyname", "getprotobynumber",
"getprotoent", "getservbyname", "getservbyport", "getservent", "sethostent",
"setnetent", "setprotoent", "setservent"
Time-related functions
"gmtime", "localtime", "time", "times"
Functions new in perl5
"abs", "bless", "break", "chomp", "chr", "continue", "default", "exists", "formline",
"given", "glob", "import", "lc", "lcfirst", "lock", "map", "my", "no", "our",
"prototype", "qr//", "qw//", "qx//", "readline", "readpipe", "ref", "sub"*, "sysopen",
"tie", "tied", "uc", "ucfirst", "untie", "use", "when"
* - "sub" was a keyword in perl4, but in perl5 it is an operator, which can be used in
expressions.
Functions obsoleted in perl5
"dbmclose", "dbmopen"
Portability
Perl was born in Unix and can therefore access all common Unix system calls. In non-Unix
environments, the functionality of some Unix system calls may not be available, or details
of the available functionality may differ slightly. The Perl functions affected by this
are:
"-X", "binmode", "chmod", "chown", "chroot", "crypt", "dbmclose", "dbmopen", "dump",
"endgrent", "endhostent", "endnetent", "endprotoent", "endpwent", "endservent", "exec",
"fcntl", "flock", "fork", "getgrent", "getgrgid", "gethostbyname", "gethostent",
"getlogin", "getnetbyaddr", "getnetbyname", "getnetent", "getppid", "getpgrp",
"getpriority", "getprotobynumber", "getprotoent", "getpwent", "getpwnam", "getpwuid",
"getservbyport", "getservent", "getsockopt", "glob", "ioctl", "kill", "link", "lstat",
"msgctl", "msgget", "msgrcv", "msgsnd", "open", "pipe", "readlink", "rename", "select",
"semctl", "semget", "semop", "setgrent", "sethostent", "setnetent", "setpgrp",
"setpriority", "setprotoent", "setpwent", "setservent", "setsockopt", "shmctl", "shmget",
"shmread", "shmwrite", "socket", "socketpair", "stat", "symlink", "syscall", "sysopen",
"system", "times", "truncate", "umask", "unlink", "utime", "wait", "waitpid"
For more information about the portability of these functions, see perlport and other
available platform-specific documentation.
Alphabetical Listing of Perl Functions
-X FILEHANDLE
-X EXPR
-X DIRHANDLE
-X A file test, where X is one of the letters listed below. This unary operator
takes one argument, either a filename, a filehandle, or a dirhandle, and tests the
associated file to see if something is true about it. If the argument is omitted,
tests $_, except for "-t", which tests STDIN. Unless otherwise documented, it
returns 1 for true and '' for false, or the undefined value if the file doesn't
exist. Despite the funny names, precedence is the same as any other named unary
operator. The operator may be any of:
-r File is readable by effective uid/gid.
-w File is writable by effective uid/gid.
-x File is executable by effective uid/gid.
-o File is owned by effective uid.
-R File is readable by real uid/gid.
-W File is writable by real uid/gid.
-X File is executable by real uid/gid.
-O File is owned by real uid.
-e File exists.
-z File has zero size (is empty).
-s File has nonzero size (returns size in bytes).
-f File is a plain file.
-d File is a directory.
-l File is a symbolic link.
-p File is a named pipe (FIFO), or Filehandle is a pipe.
-S File is a socket.
-b File is a block special file.
-c File is a character special file.
-t Filehandle is opened to a tty.
-u File has setuid bit set.
-g File has setgid bit set.
-k File has sticky bit set.
-T File is an ASCII text file (heuristic guess).
-B File is a "binary" file (opposite of -T).
-M Script start time minus file modification time, in days.
-A Same for access time.
-C Same for inode change time (Unix, may differ for other platforms)
Example:
while (<>) {
chomp;
next unless -f $_; # ignore specials
#...
}
The interpretation of the file permission operators "-r", "-R", "-w", "-W", "-x",
and "-X" is by default based solely on the mode of the file and the uids and gids
of the user. There may be other reasons you can't actually read, write, or
execute the file: for example network filesystem access controls, ACLs (access
control lists), read-only filesystems, and unrecognized executable formats. Note
that the use of these six specific operators to verify if some operation is
possible is usually a mistake, because it may be open to race conditions.
Also note that, for the superuser on the local filesystems, the "-r", "-R", "-w",
and "-W" tests always return 1, and "-x" and "-X" return 1 if any execute bit is
set in the mode. Scripts run by the superuser may thus need to do a stat() to
determine the actual mode of the file, or temporarily set their effective uid to
something else.
If you are using ACLs, there is a pragma called "filetest" that may produce more
accurate results than the bare stat() mode bits. When under the "use filetest
'access'" the above-mentioned filetests will test whether the permission can (not)
be granted using the access() family of system calls. Also note that the "-x" and
"-X" may under this pragma return true even if there are no execute permission
bits set (nor any extra execute permission ACLs). This strangeness is due to the
underlying system calls' definitions. Note also that, due to the implementation of
"use filetest 'access'", the "_" special filehandle won't cache the results of the
file tests when this pragma is in effect. Read the documentation for the
"filetest" pragma for more information.
Note that "-s/a/b/" does not do a negated substitution. Saying "-exp($foo)" still
works as expected, however--only single letters following a minus are interpreted
as file tests.
The "-T" and "-B" switches work as follows. The first block or so of the file is
examined for odd characters such as strange control codes or characters with the
high bit set. If too many strange characters (>30%) are found, it's a "-B" file;
otherwise it's a "-T" file. Also, any file containing null in the first block is
considered a binary file. If "-T" or "-B" is used on a filehandle, the current IO
buffer is examined rather than the first block. Both "-T" and "-B" return true on
a null file, or a file at EOF when testing a filehandle. Because you have to read
a file to do the "-T" test, on most occasions you want to use a "-f" against the
file first, as in "next unless -f $file && -T $file".
If any of the file tests (or either the "stat" or "lstat" operators) are given the
special filehandle consisting of a solitary underline, then the stat structure of
the previous file test (or stat operator) is used, saving a system call. (This
doesn't work with "-t", and you need to remember that lstat() and "-l" will leave
values in the stat structure for the symbolic link, not the real file.) (Also, if
the stat buffer was filled by an "lstat" call, "-T" and "-B" will reset it with
the results of "stat _"). Example:
print "Can do.\n" if -r $a || -w _ || -x _;
stat($filename);
print "Readable\n" if -r _;
print "Writable\n" if -w _;
print "Executable\n" if -x _;
print "Setuid\n" if -u _;
print "Setgid\n" if -g _;
print "Sticky\n" if -k _;
print "Text\n" if -T _;
print "Binary\n" if -B _;
As of Perl 5.9.1, as a form of purely syntactic sugar, you can stack file test
operators, in a way that "-f -w -x $file" is equivalent to "-x $file && -w _ && -f
_". (This is only syntax fancy: if you use the return value of "-f $file" as an
argument to another filetest operator, no special magic will happen.)
abs VALUE
abs Returns the absolute value of its argument. If VALUE is omitted, uses $_.
accept NEWSOCKET,GENERICSOCKET
Accepts an incoming socket connect, just as the accept(2) system call does.
Returns the packed address if it succeeded, false otherwise. See the example in
"Sockets: Client/Server Communication" in perlipc.
On systems that support a close-on-exec flag on files, the flag will be set for
the newly opened file descriptor, as determined by the value of $^F. See "$^F" in
perlvar.
alarm SECONDS
alarm Arranges to have a SIGALRM delivered to this process after the specified number of
wallclock seconds has elapsed. If SECONDS is not specified, the value stored in
$_ is used. (On some machines, unfortunately, the elapsed time may be up to one
second less or more than you specified because of how seconds are counted, and
process scheduling may delay the delivery of the signal even further.)
Only one timer may be counting at once. Each call disables the previous timer,
and an argument of 0 may be supplied to cancel the previous timer without starting
a new one. The returned value is the amount of time remaining on the previous
timer.
For delays of finer granularity than one second, the Time::HiRes module (from
CPAN, and starting from Perl 5.8 part of the standard distribution) provides
ualarm(). You may also use Perl's four-argument version of select() leaving the
first three arguments undefined, or you might be able to use the "syscall"
interface to access setitimer(2) if your system supports it. See perlfaq8 for
details.
It is usually a mistake to intermix "alarm" and "sleep" calls. ("sleep" may be
internally implemented in your system with "alarm")
If you want to use "alarm" to time out a system call you need to use an
"eval"/"die" pair. You can't rely on the alarm causing the system call to fail
with $! set to "EINTR" because Perl sets up signal handlers to restart system
calls on some systems. Using "eval"/"die" always works, modulo the caveats given
in "Signals" in perlipc.
eval {
local $SIG{ALRM} = sub { die "alarm\n" }; # NB: \n required
alarm $timeout;
$nread = sysread SOCKET, $buffer, $size;
alarm 0;
};
if ($@) {
die unless $@ eq "alarm\n"; # propagate unexpected errors
# timed out
}
else {
# didn't
}
For more information see perlipc.
atan2 Y,X
Returns the arctangent of Y/X in the range -PI to PI.
For the tangent operation, you may use the "Math::Trig::tan" function, or use the
familiar relation:
sub tan { sin($_[0]) / cos($_[0]) }
Note that atan2(0, 0) is not well-defined.
bind SOCKET,NAME
Binds a network address to a socket, just as the bind system call does. Returns
true if it succeeded, false otherwise. NAME should be a packed address of the
appropriate type for the socket. See the examples in "Sockets: Client/Server
Communication" in perlipc.
binmode FILEHANDLE, LAYER
binmode FILEHANDLE
Arranges for FILEHANDLE to be read or written in "binary" or "text" mode on
systems where the run-time libraries distinguish between binary and text files.
If FILEHANDLE is an expression, the value is taken as the name of the filehandle.
Returns true on success, otherwise it returns "undef" and sets $! (errno).
On some systems (in general, DOS and Windows-based systems) binmode() is necessary
when you're not working with a text file. For the sake of portability it is a
good idea to always use it when appropriate, and to never use it when it isn't
appropriate. Also, people can set their I/O to be by default UTF-8 encoded
Unicode, not bytes.
In other words: regardless of platform, use binmode() on binary data, like for
example images.
If LAYER is present it is a single string, but may contain multiple directives.
The directives alter the behaviour of the file handle. When LAYER is present
using binmode on text file makes sense.
If LAYER is omitted or specified as ":raw" the filehandle is made suitable for
passing binary data. This includes turning off possible CRLF translation and
marking it as bytes (as opposed to Unicode characters). Note that, despite what
may be implied in "Programming Perl" (the Camel) or elsewhere, ":raw" is not
simply the inverse of ":crlf" -- other layers which would affect the binary nature
of the stream are also disabled. See PerlIO, perlrun and the discussion about the
PERLIO environment variable.
The ":bytes", ":crlf", and ":utf8", and any other directives of the form ":...",
are called I/O layers. The "open" pragma can be used to establish default I/O
layers. See open.
The LAYER parameter of the binmode() function is described as "DISCIPLINE" in
"Programming Perl, 3rd Edition". However, since the publishing of this book, by
many known as "Camel III", the consensus of the naming of this functionality has
moved from "discipline" to "layer". All documentation of this version of Perl
therefore refers to "layers" rather than to "disciplines". Now back to the
regularly scheduled documentation...
To mark FILEHANDLE as UTF-8, use ":utf8" or ":encoding(utf8)". ":utf8" just marks
the data as UTF-8 without further checking, while ":encoding(utf8)" checks the
data for actually being valid UTF-8. More details can be found in
PerlIO::encoding.
In general, binmode() should be called after open() but before any I/O is done on
the filehandle. Calling binmode() will normally flush any pending buffered output
data (and perhaps pending input data) on the handle. An exception to this is the
":encoding" layer that changes the default character encoding of the handle, see
open. The ":encoding" layer sometimes needs to be called in mid-stream, and it
doesn't flush the stream. The ":encoding" also implicitly pushes on top of itself
the ":utf8" layer because internally Perl will operate on UTF-8 encoded Unicode
characters.
The operating system, device drivers, C libraries, and Perl run-time system all
work together to let the programmer treat a single character ("\n") as the line
terminator, irrespective of the external representation. On many operating
systems, the native text file representation matches the internal representation,
but on some platforms the external representation of "\n" is made up of more than
one character.
Mac OS, all variants of Unix, and Stream_LF files on VMS use a single character to
end each line in the external representation of text (even though that single
character is CARRIAGE RETURN on Mac OS and LINE FEED on Unix and most VMS files).
In other systems like OS/2, DOS and the various flavors of MS-Windows your program
sees a "\n" as a simple "\cJ", but what's stored in text files are the two
characters "\cM\cJ". That means that, if you don't use binmode() on these
systems, "\cM\cJ" sequences on disk will be converted to "\n" on input, and any
"\n" in your program will be converted back to "\cM\cJ" on output. This is what
you want for text files, but it can be disastrous for binary files.
Another consequence of using binmode() (on some systems) is that special end-of-
file markers will be seen as part of the data stream. For systems from the
Microsoft family this means that if your binary data contains "\cZ", the I/O
subsystem will regard it as the end of the file, unless you use binmode().
binmode() is not only important for readline() and print() operations, but also
when using read(), seek(), sysread(), syswrite() and tell() (see perlport for more
details). See the $/ and "$\" variables in perlvar for how to manually set your
input and output line-termination sequences.
bless REF,CLASSNAME
bless REF
This function tells the thingy referenced by REF that it is now an object in the
CLASSNAME package. If CLASSNAME is omitted, the current package is used. Because
a "bless" is often the last thing in a constructor, it returns the reference for
convenience. Always use the two-argument version if a derived class might inherit
the function doing the blessing. See perltoot and perlobj for more about the
blessing (and blessings) of objects.
Consider always blessing objects in CLASSNAMEs that are mixed case. Namespaces
with all lowercase names are considered reserved for Perl pragmata. Builtin types
have all uppercase names. To prevent confusion, you may wish to avoid such package
names as well. Make sure that CLASSNAME is a true value.
See "Perl Modules" in perlmod.
break Break out of a "given()" block.
This keyword is enabled by the "switch" feature: see feature for more information.
caller EXPR
caller Returns the context of the current subroutine call. In scalar context, returns
the caller's package name if there is a caller, that is, if we're in a subroutine
or "eval" or "require", and the undefined value otherwise. In list context,
returns
# 0 1 2
($package, $filename, $line) = caller;
With EXPR, it returns some extra information that the debugger uses to print a
stack trace. The value of EXPR indicates how many call frames to go back before
the current one.
# 0 1 2 3 4
($package, $filename, $line, $subroutine, $hasargs,
# 5 6 7 8 9 10
$wantarray, $evaltext, $is_require, $hints, $bitmask, $hinthash)
= caller($i);
Here $subroutine may be "(eval)" if the frame is not a subroutine call, but an
"eval". In such a case additional elements $evaltext and $is_require are set:
$is_require is true if the frame is created by a "require" or "use" statement,
$evaltext contains the text of the "eval EXPR" statement. In particular, for an
"eval BLOCK" statement, $subroutine is "(eval)", but $evaltext is undefined.
(Note also that each "use" statement creates a "require" frame inside an "eval
EXPR" frame.) $subroutine may also be "(unknown)" if this particular subroutine
happens to have been deleted from the symbol table. $hasargs is true if a new
instance of @_ was set up for the frame. $hints and $bitmask contain pragmatic
hints that the caller was compiled with. The $hints and $bitmask values are
subject to change between versions of Perl, and are not meant for external use.
$hinthash is a reference to a hash containing the value of "%^H" when the caller
was compiled, or "undef" if "%^H" was empty. Do not modify the values of this
hash, as they are the actual values stored in the optree.
Furthermore, when called from within the DB package, caller returns more detailed
information: it sets the list variable @DB::args to be the arguments with which
the subroutine was invoked.
Be aware that the optimizer might have optimized call frames away before "caller"
had a chance to get the information. That means that caller(N) might not return
information about the call frame you expect it do, for "N > 1". In particular,
@DB::args might have information from the previous time "caller" was called.
chdir EXPR
chdir FILEHANDLE
chdir DIRHANDLE
chdir Changes the working directory to EXPR, if possible. If EXPR is omitted, changes to
the directory specified by $ENV{HOME}, if set; if not, changes to the directory
specified by $ENV{LOGDIR}. (Under VMS, the variable $ENV{SYS$LOGIN} is also
checked, and used if it is set.) If neither is set, "chdir" does nothing. It
returns true upon success, false otherwise. See the example under "die".
On systems that support fchdir, you might pass a file handle or directory handle
as argument. On systems that don't support fchdir, passing handles produces a
fatal error at run time.
chmod LIST
Changes the permissions of a list of files. The first element of the list must be
the numerical mode, which should probably be an octal number, and which definitely
should not be a string of octal digits: 0644 is okay, '0644' is not. Returns the
number of files successfully changed. See also "oct", if all you have is a
string.
$cnt = chmod 0755, 'foo', 'bar';
chmod 0755, @executables;
$mode = '0644'; chmod $mode, 'foo'; # !!! sets mode to
# --w----r-T
$mode = '0644'; chmod oct($mode), 'foo'; # this is better
$mode = 0644; chmod $mode, 'foo'; # this is best
On systems that support fchmod, you might pass file handles among the files. On
systems that don't support fchmod, passing file handles produces a fatal error at
run time. The file handles must be passed as globs or references to be
recognized. Barewords are considered file names.
open(my $fh, "<", "foo");
my $perm = (stat $fh)[2] & 07777;
chmod($perm | 0600, $fh);
You can also import the symbolic "S_I*" constants from the Fcntl module:
use Fcntl ':mode';
chmod S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH, @executables;
# This is identical to the chmod 0755 of the above example.
chomp VARIABLE
chomp( LIST )
chomp This safer version of "chop" removes any trailing string that corresponds to the
current value of $/ (also known as $INPUT_RECORD_SEPARATOR in the "English"
module). It returns the total number of characters removed from all its
arguments. It's often used to remove the newline from the end of an input record
when you're worried that the final record may be missing its newline. When in
paragraph mode ("$/ = """), it removes all trailing newlines from the string.
When in slurp mode ("$/ = undef") or fixed-length record mode ($/ is a reference
to an integer or the like, see perlvar) chomp() won't remove anything. If
VARIABLE is omitted, it chomps $_. Example:
while (<>) {
chomp; # avoid \n on last field
@array = split(/:/);
# ...
}
If VARIABLE is a hash, it chomps the hash's values, but not its keys.
You can actually chomp anything that's an lvalue, including an assignment:
chomp($cwd = `pwd`);
chomp($answer = <STDIN>);
If you chomp a list, each element is chomped, and the total number of characters
removed is returned.
Note that parentheses are necessary when you're chomping anything that is not a
simple variable. This is because "chomp $cwd = `pwd`;" is interpreted as "(chomp
$cwd) = `pwd`;", rather than as "chomp( $cwd = `pwd` )" which you might expect.
Similarly, "chomp $a, $b" is interpreted as "chomp($a), $b" rather than as
"chomp($a, $b)".
chop VARIABLE
chop( LIST )
chop Chops off the last character of a string and returns the character chopped. It is
much more efficient than "s/.$//s" because it neither scans nor copies the string.
If VARIABLE is omitted, chops $_. If VARIABLE is a hash, it chops the hash's
values, but not its keys.
You can actually chop anything that's an lvalue, including an assignment.
If you chop a list, each element is chopped. Only the value of the last "chop" is
returned.
Note that "chop" returns the last character. To return all but the last
character, use "substr($string, 0, -1)".
See also "chomp".
chown LIST
Changes the owner (and group) of a list of files. The first two elements of the
list must be the numeric uid and gid, in that order. A value of -1 in either
position is interpreted by most systems to leave that value unchanged. Returns
the number of files successfully changed.
$cnt = chown $uid, $gid, 'foo', 'bar';
chown $uid, $gid, @filenames;
On systems that support fchown, you might pass file handles among the files. On
systems that don't support fchown, passing file handles produces a fatal error at
run time. The file handles must be passed as globs or references to be
recognized. Barewords are considered file names.
Here's an example that looks up nonnumeric uids in the passwd file:
print "User: ";
chomp($user = <STDIN>);
print "Files: ";
chomp($pattern = <STDIN>);
($login,$pass,$uid,$gid) = getpwnam($user)
or die "$user not in passwd file";
@ary = glob($pattern); # expand filenames
chown $uid, $gid, @ary;
On most systems, you are not allowed to change the ownership of the file unless
you're the superuser, although you should be able to change the group to any of
your secondary groups. On insecure systems, these restrictions may be relaxed,
but this is not a portable assumption. On POSIX systems, you can detect this
condition this way:
use POSIX qw(sysconf _PC_CHOWN_RESTRICTED);
$can_chown_giveaway = not sysconf(_PC_CHOWN_RESTRICTED);
chr NUMBER
chr Returns the character represented by that NUMBER in the character set. For
example, "chr(65)" is "A" in either ASCII or Unicode, and chr(0x263a) is a Unicode
smiley face.
Negative values give the Unicode replacement character (chr(0xfffd)), except under
the bytes pragma, where low eight bits of the value (truncated to an integer) are
used.
If NUMBER is omitted, uses $_.
For the reverse, use "ord".
Note that characters from 128 to 255 (inclusive) are by default internally not
encoded as UTF-8 for backward compatibility reasons.
See perlunicode for more about Unicode.
chroot FILENAME
chroot This function works like the system call by the same name: it makes the named
directory the new root directory for all further pathnames that begin with a "/"
by your process and all its children. (It doesn't change your current working
directory, which is unaffected.) For security reasons, this call is restricted to
the superuser. If FILENAME is omitted, does a "chroot" to $_.
close FILEHANDLE
close Closes the file or pipe associated with the file handle, flushes the IO buffers,
and closes the system file descriptor. Returns true if those operations have
succeeded and if no error was reported by any PerlIO layer. Closes the currently
selected filehandle if the argument is omitted.
You don't have to close FILEHANDLE if you are immediately going to do another
"open" on it, because "open" will close it for you. (See "open".) However, an
explicit "close" on an input file resets the line counter ($.), while the implicit
close done by "open" does not.
If the file handle came from a piped open, "close" will additionally return false
if one of the other system calls involved fails, or if the program exits with non-
zero status. (If the only problem was that the program exited non-zero, $! will
be set to 0.) Closing a pipe also waits for the process executing on the pipe to
complete, in case you want to look at the output of the pipe afterwards, and
implicitly puts the exit status value of that command into $? and
"${^CHILD_ERROR_NATIVE}".
Prematurely closing the read end of a pipe (i.e. before the process writing to it
at the other end has closed it) will result in a SIGPIPE being delivered to the
writer. If the other end can't handle that, be sure to read all the data before
closing the pipe.
Example:
open(OUTPUT, '|sort >foo') # pipe to sort
or die "Can't start sort: $!";
#... # print stuff to output
close OUTPUT # wait for sort to finish
or warn $! ? "Error closing sort pipe: $!"
: "Exit status $? from sort";
open(INPUT, 'foo') # get sort's results
or die "Can't open 'foo' for input: $!";
FILEHANDLE may be an expression whose value can be used as an indirect filehandle,
usually the real filehandle name.
closedir DIRHANDLE
Closes a directory opened by "opendir" and returns the success of that system
call.
connect SOCKET,NAME
Attempts to connect to a remote socket, just as the connect system call does.
Returns true if it succeeded, false otherwise. NAME should be a packed address of
the appropriate type for the socket. See the examples in "Sockets: Client/Server
Communication" in perlipc.
continue BLOCK
continue
"continue" is actually a flow control statement rather than a function. If there
is a "continue" BLOCK attached to a BLOCK (typically in a "while" or "foreach"),
it is always executed just before the conditional is about to be evaluated again,
just like the third part of a "for" loop in C. Thus it can be used to increment a
loop variable, even when the loop has been continued via the "next" statement
(which is similar to the C "continue" statement).
"last", "next", or "redo" may appear within a "continue" block. "last" and "redo"
will behave as if they had been executed within the main block. So will "next",
but since it will execute a "continue" block, it may be more entertaining.
while (EXPR) {
### redo always comes here
do_something;
} continue {
### next always comes here
do_something_else;
# then back the top to re-check EXPR
}
### last always comes here
Omitting the "continue" section is semantically equivalent to using an empty one,
logically enough. In that case, "next" goes directly back to check the condition
at the top of the loop.
If the "switch" feature is enabled, "continue" is also a function that will break
out of the current "when" or "default" block, and fall through to the next case.
See feature and "Switch statements" in perlsyn for more information.
cos EXPR
cos Returns the cosine of EXPR (expressed in radians). If EXPR is omitted, takes
cosine of $_.
For the inverse cosine operation, you may use the "Math::Trig::acos()" function,
or use this relation:
sub acos { atan2( sqrt(1 - $_[0] * $_[0]), $_[0] ) }
crypt PLAINTEXT,SALT
Creates a digest string exactly like the crypt(3) function in the C library
(assuming that you actually have a version there that has not been extirpated as a
potential munitions).
crypt() is a one-way hash function. The PLAINTEXT and SALT is turned into a short
string, called a digest, which is returned. The same PLAINTEXT and SALT will
always return the same string, but there is no (known) way to get the original
PLAINTEXT from the hash. Small changes in the PLAINTEXT or SALT will result in
large changes in the digest.
There is no decrypt function. This function isn't all that useful for
cryptography (for that, look for Crypt modules on your nearby CPAN mirror) and the
name "crypt" is a bit of a misnomer. Instead it is primarily used to check if two
pieces of text are the same without having to transmit or store the text itself.
An example is checking if a correct password is given. The digest of the password
is stored, not the password itself. The user types in a password that is
crypt()'d with the same salt as the stored digest. If the two digests match the
password is correct.
When verifying an existing digest string you should use the digest as the salt
(like "crypt($plain, $digest) eq $digest"). The SALT used to create the digest is
visible as part of the digest. This ensures crypt() will hash the new string with
the same salt as the digest. This allows your code to work with the standard
crypt and with more exotic implementations. In other words, do not assume
anything about the returned string itself, or how many bytes in the digest matter.
Traditionally the result is a string of 13 bytes: two first bytes of the salt,
followed by 11 bytes from the set "[./0-9A-Za-z]", and only the first eight bytes
of the digest string mattered, but alternative hashing schemes (like MD5), higher
level security schemes (like C2), and implementations on non-UNIX platforms may
produce different strings.
When choosing a new salt create a random two character string whose characters
come from the set "[./0-9A-Za-z]" (like "join '', ('.', '/', 0..9, 'A'..'Z',
'a'..'z')[rand 64, rand 64]"). This set of characters is just a recommendation;
the characters allowed in the salt depend solely on your system's crypt library,
and Perl can't restrict what salts "crypt()" accepts.
Here's an example that makes sure that whoever runs this program knows their
password:
$pwd = (getpwuid($<))[1];
system "stty -echo";
print "Password: ";
chomp($word = <STDIN>);
print "\n";
system "stty echo";
if (crypt($word, $pwd) ne $pwd) {
die "Sorry...\n";
} else {
print "ok\n";
}
Of course, typing in your own password to whoever asks you for it is unwise.
The crypt function is unsuitable for hashing large quantities of data, not least
of all because you can't get the information back. Look at the Digest module for
more robust algorithms.
If using crypt() on a Unicode string (which potentially has characters with
codepoints above 255), Perl tries to make sense of the situation by trying to
downgrade (a copy of the string) the string back to an eight-bit byte string
before calling crypt() (on that copy). If that works, good. If not, crypt() dies
with "Wide character in crypt".
dbmclose HASH
[This function has been largely superseded by the "untie" function.]
Breaks the binding between a DBM file and a hash.
dbmopen HASH,DBNAME,MASK
[This function has been largely superseded by the "tie" function.]
This binds a dbm(3), ndbm(3), sdbm(3), gdbm(3), or Berkeley DB file to a hash.
HASH is the name of the hash. (Unlike normal "open", the first argument is not a
filehandle, even though it looks like one). DBNAME is the name of the database
(without the .dir or .pag extension if any). If the database does not exist, it
is created with protection specified by MASK (as modified by the "umask"). If
your system supports only the older DBM functions, you may perform only one
"dbmopen" in your program. In older versions of Perl, if your system had neither
DBM nor ndbm, calling "dbmopen" produced a fatal error; it now falls back to
sdbm(3).
If you don't have write access to the DBM file, you can only read hash variables,
not set them. If you want to test whether you can write, either use file tests or
try setting a dummy hash entry inside an "eval", which will trap the error.
Note that functions such as "keys" and "values" may return huge lists when used on
large DBM files. You may prefer to use the "each" function to iterate over large
DBM files. Example:
# print out history file offsets
dbmopen(%HIST,'/usr/lib/news/history',0666);
while (($key,$val) = each %HIST) {
print $key, ' = ', unpack('L',$val), "\n";
}
dbmclose(%HIST);
See also AnyDBM_File for a more general description of the pros and cons of the
various dbm approaches, as well as DB_File for a particularly rich implementation.
You can control which DBM library you use by loading that library before you call
dbmopen():
use DB_File;
dbmopen(%NS_Hist, "$ENV{HOME}/.netscape/history.db")
or die "Can't open netscape history file: $!";
defined EXPR
defined Returns a Boolean value telling whether EXPR has a value other than the undefined
value "undef". If EXPR is not present, $_ will be checked.
Many operations return "undef" to indicate failure, end of file, system error,
uninitialized variable, and other exceptional conditions. This function allows
you to distinguish "undef" from other values. (A simple Boolean test will not
distinguish among "undef", zero, the empty string, and "0", which are all equally
false.) Note that since "undef" is a valid scalar, its presence doesn't
necessarily indicate an exceptional condition: "pop" returns "undef" when its
argument is an empty array, or when the element to return happens to be "undef".
You may also use "defined(&func)" to check whether subroutine &func has ever been
defined. The return value is unaffected by any forward declarations of &func.
Note that a subroutine which is not defined may still be callable: its package may
have an "AUTOLOAD" method that makes it spring into existence the first time that
it is called -- see perlsub.
Use of "defined" on aggregates (hashes and arrays) is deprecated. It used to
report whether memory for that aggregate has ever been allocated. This behavior
may disappear in future versions of Perl. You should instead use a simple test
for size:
if (@an_array) { print "has array elements\n" }
if (%a_hash) { print "has hash members\n" }
When used on a hash element, it tells you whether the value is defined, not
whether the key exists in the hash. Use "exists" for the latter purpose.
Examples:
print if defined $switch{'D'};
print "$val\n" while defined($val = pop(@ary));
die "Can't readlink $sym: $!"
unless defined($value = readlink $sym);
sub foo { defined &$bar ? &$bar(@_) : die "No bar"; }
$debugging = 0 unless defined $debugging;
Note: Many folks tend to overuse "defined", and then are surprised to discover
that the number 0 and "" (the zero-length string) are, in fact, defined values.
For example, if you say
"ab" =~ /a(.*)b/;
The pattern match succeeds, and $1 is defined, despite the fact that it matched
"nothing". It didn't really fail to match anything. Rather, it matched something
that happened to be zero characters long. This is all very above-board and
honest. When a function returns an undefined value, it's an admission that it
couldn't give you an honest answer. So you should use "defined" only when you're
questioning the integrity of what you're trying to do. At other times, a simple
comparison to 0 or "" is what you want.
See also "undef", "exists", "ref".
delete EXPR
Given an expression that specifies a hash element, array element, hash slice, or
array slice, deletes the specified element(s) from the hash or array. In the case
of an array, if the array elements happen to be at the end, the size of the array
will shrink to the highest element that tests true for exists() (or 0 if no such
element exists).
Returns a list with the same number of elements as the number of elements for
which deletion was attempted. Each element of that list consists of either the
value of the element deleted, or the undefined value. In scalar context, this
means that you get the value of the last element deleted (or the undefined value
if that element did not exist).
%hash = (foo => 11, bar => 22, baz => 33);
$scalar = delete $hash{foo}; # $scalar is 11
$scalar = delete @hash{qw(foo bar)}; # $scalar is 22
@array = delete @hash{qw(foo bar baz)}; # @array is (undef,undef,33)
Deleting from %ENV modifies the environment. Deleting from a hash tied to a DBM
file deletes the entry from the DBM file. Deleting from a "tie"d hash or array
may not necessarily return anything.
Deleting an array element effectively returns that position of the array to its
initial, uninitialized state. Subsequently testing for the same element with
exists() will return false. Also, deleting array elements in the middle of an
array will not shift the index of the elements after them down. Use splice() for
that. See "exists".
The following (inefficiently) deletes all the values of %HASH and @ARRAY:
foreach $key (keys %HASH) {
delete $HASH{$key};
}
foreach $index (0 .. $#ARRAY) {
delete $ARRAY[$index];
}
And so do these:
delete @HASH{keys %HASH};
delete @ARRAY[0 .. $#ARRAY];
But both of these are slower than just assigning the empty list or undefining
%HASH or @ARRAY:
%HASH = (); # completely empty %HASH
undef %HASH; # forget %HASH ever existed
@ARRAY = (); # completely empty @ARRAY
undef @ARRAY; # forget @ARRAY ever existed
Note that the EXPR can be arbitrarily complicated as long as the final operation
is a hash element, array element, hash slice, or array slice lookup:
delete $ref->[$x][$y]{$key};
delete @{$ref->[$x][$y]}{$key1, $key2, @morekeys};
delete $ref->[$x][$y][$index];
delete @{$ref->[$x][$y]}[$index1, $index2, @moreindices];
die LIST
Outside an "eval", prints the value of LIST to "STDERR" and exits with the current
value of $! (errno). If $! is 0, exits with the value of "($? >> 8)" (backtick
`command` status). If "($? >> 8)" is 0, exits with 255. Inside an "eval()," the
error message is stuffed into $@ and the "eval" is terminated with the undefined
value. This makes "die" the way to raise an exception.
Equivalent examples:
die "Can't cd to spool: $!\n" unless chdir '/usr/spool/news';
chdir '/usr/spool/news' or die "Can't cd to spool: $!\n"
If the last element of LIST does not end in a newline, the current script line
number and input line number (if any) are also printed, and a newline is supplied.
Note that the "input line number" (also known as "chunk") is subject to whatever
notion of "line" happens to be currently in effect, and is also available as the
special variable $.. See "$/" in perlvar and "$." in perlvar.
Hint: sometimes appending ", stopped" to your message will cause it to make better
sense when the string "at foo line 123" is appended. Suppose you are running
script "canasta".
die "/etc/games is no good";
die "/etc/games is no good, stopped";
produce, respectively
/etc/games is no good at canasta line 123.
/etc/games is no good, stopped at canasta line 123.
See also exit(), warn(), and the Carp module.
If LIST is empty and $@ already contains a value (typically from a previous eval)
that value is reused after appending "\t...propagated". This is useful for
propagating exceptions:
eval { ... };
die unless $@ =~ /Expected exception/;
If LIST is empty and $@ contains an object reference that has a "PROPAGATE"
method, that method will be called with additional file and line number
parameters. The return value replaces the value in $@. i.e. as if "$@ = eval {
$@->PROPAGATE(__FILE__, __LINE__) };" were called.
If $@ is empty then the string "Died" is used.
die() can also be called with a reference argument. If this happens to be trapped
within an eval(), $@ contains the reference. This behavior permits a more
elaborate exception handling implementation using objects that maintain arbitrary
state about the nature of the exception. Such a scheme is sometimes preferable to
matching particular string values of $@ using regular expressions. Because $@ is
a global variable, and eval() may be used within object implementations, care must
be taken that analyzing the error object doesn't replace the reference in the
global variable. The easiest solution is to make a local copy of the reference
before doing other manipulations. Here's an example:
use Scalar::Util 'blessed';
eval { ... ; die Some::Module::Exception->new( FOO => "bar" ) };
if (my $ev_err = $@) {
if (blessed($ev_err) && $ev_err->isa("Some::Module::Exception")) {
# handle Some::Module::Exception
}
else {
# handle all other possible exceptions
}
}
Because perl will stringify uncaught exception messages before displaying them,
you may want to overload stringification operations on such custom exception
objects. See overload for details about that.
You can arrange for a callback to be run just before the "die" does its deed, by
setting the $SIG{__DIE__} hook. The associated handler will be called with the
error text and can change the error message, if it sees fit, by calling "die"
again. See "$SIG{expr}" in perlvar for details on setting %SIG entries, and "eval
BLOCK" for some examples. Although this feature was to be run only right before
your program was to exit, this is not currently the case--the $SIG{__DIE__} hook
is currently called even inside eval()ed blocks/strings! If one wants the hook to
do nothing in such situations, put
die @_ if $^S;
as the first line of the handler (see "$^S" in perlvar). Because this promotes
strange action at a distance, this counterintuitive behavior may be fixed in a
future release.
do BLOCK
Not really a function. Returns the value of the last command in the sequence of
commands indicated by BLOCK. When modified by the "while" or "until" loop
modifier, executes the BLOCK once before testing the loop condition. (On other
statements the loop modifiers test the conditional first.)
"do BLOCK" does not count as a loop, so the loop control statements "next",
"last", or "redo" cannot be used to leave or restart the block. See perlsyn for
alternative strategies.
do SUBROUTINE(LIST)
This form of subroutine call is deprecated. See perlsub.
do EXPR Uses the value of EXPR as a filename and executes the contents of the file as a
Perl script.
do 'stat.pl';
is just like
eval `cat stat.pl`;
except that it's more efficient and concise, keeps track of the current filename
for error messages, searches the @INC directories, and updates %INC if the file is
found. See "Predefined Names" in perlvar for these variables. It also differs in
that code evaluated with "do FILENAME" cannot see lexicals in the enclosing scope;
"eval STRING" does. It's the same, however, in that it does reparse the file
every time you call it, so you probably don't want to do this inside a loop.
If "do" cannot read the file, it returns undef and sets $! to the error. If "do"
can read the file but cannot compile it, it returns undef and sets an error
message in $@. If the file is successfully compiled, "do" returns the value of
the last expression evaluated.
Note that inclusion of library modules is better done with the "use" and "require"
operators, which also do automatic error checking and raise an exception if
there's a problem.
You might like to use "do" to read in a program configuration file. Manual error
checking can be done this way:
# read in config files: system first, then user
for $file ("/share/prog/defaults.rc",
"$ENV{HOME}/.someprogrc")
{
unless ($return = do $file) {
warn "couldn't parse $file: $@" if $@;
warn "couldn't do $file: $!" unless defined $return;
warn "couldn't run $file" unless $return;
}
}
dump LABEL
dump This function causes an immediate core dump. See also the -u command-line switch
in perlrun, which does the same thing. Primarily this is so that you can use the
undump program (not supplied) to turn your core dump into an executable binary
after having initialized all your variables at the beginning of the program. When
the new binary is executed it will begin by executing a "goto LABEL" (with all the
restrictions that "goto" suffers). Think of it as a goto with an intervening core
dump and reincarnation. If "LABEL" is omitted, restarts the program from the top.
WARNING: Any files opened at the time of the dump will not be open any more when
the program is reincarnated, with possible resulting confusion on the part of
Perl.
This function is now largely obsolete, mostly because it's very hard to convert a
core file into an executable. That's why you should now invoke it as
"CORE::dump()", if you don't want to be warned against a possible typo.
each HASH
When called in list context, returns a 2-element list consisting of the key and
value for the next element of a hash, so that you can iterate over it. When
called in scalar context, returns only the key for the next element in the hash.
Entries are returned in an apparently random order. The actual random order is
subject to change in future versions of perl, but it is guaranteed to be in the
same order as either the "keys" or "values" function would produce on the same
(unmodified) hash. Since Perl 5.8.1 the ordering is different even between
different runs of Perl for security reasons (see "Algorithmic Complexity Attacks"
in perlsec).
When the hash is entirely read, a null array is returned in list context (which
when assigned produces a false (0) value), and "undef" in scalar context. The
next call to "each" after that will start iterating again. There is a single
iterator for each hash, shared by all "each", "keys", and "values" function calls
in the program; it can be reset by reading all the elements from the hash, or by
evaluating "keys HASH" or "values HASH". If you add or delete elements of a hash
while you're iterating over it, you may get entries skipped or duplicated, so
don't. Exception: It is always safe to delete the item most recently returned by
"each()", which means that the following code will work:
while (($key, $value) = each %hash) {
print $key, "\n";
delete $hash{$key}; # This is safe
}
The following prints out your environment like the printenv(1) program, only in a
different order:
while (($key,$value) = each %ENV) {
print "$key=$value\n";
}
See also "keys", "values" and "sort".
eof FILEHANDLE
eof ()
eof Returns 1 if the next read on FILEHANDLE will return end of file, or if FILEHANDLE
is not open. FILEHANDLE may be an expression whose value gives the real
filehandle. (Note that this function actually reads a character and then
"ungetc"s it, so isn't very useful in an interactive context.) Do not read from a
terminal file (or call "eof(FILEHANDLE)" on it) after end-of-file is reached.
File types such as terminals may lose the end-of-file condition if you do.
An "eof" without an argument uses the last file read. Using "eof()" with empty
parentheses is very different. It refers to the pseudo file formed from the files
listed on the command line and accessed via the "<>" operator. Since "<>" isn't
explicitly opened, as a normal filehandle is, an "eof()" before "<>" has been used
will cause @ARGV to be examined to determine if input is available. Similarly,
an "eof()" after "<>" has returned end-of-file will assume you are processing
another @ARGV list, and if you haven't set @ARGV, will read input from "STDIN";
see "I/O Operators" in perlop.
In a "while (<>)" loop, "eof" or "eof(ARGV)" can be used to detect the end of each
file, "eof()" will only detect the end of the last file. Examples:
# reset line numbering on each input file
while (<>) {
next if /^\s*#/; # skip comments
print "$.\t$_";
} continue {
close ARGV if eof; # Not eof()!
}
# insert dashes just before last line of last file
while (<>) {
if (eof()) { # check for end of last file
print "--------------\n";
}
print;
last if eof(); # needed if we're reading from a terminal
}
Practical hint: you almost never need to use "eof" in Perl, because the input
operators typically return "undef" when they run out of data, or if there was an
error.
eval EXPR
eval BLOCK
eval In the first form, the return value of EXPR is parsed and executed as if it were a
little Perl program. The value of the expression (which is itself determined
within scalar context) is first parsed, and if there weren't any errors, executed
in the lexical context of the current Perl program, so that any variable settings
or subroutine and format definitions remain afterwards. Note that the value is
parsed every time the "eval" executes. If EXPR is omitted, evaluates $_. This
form is typically used to delay parsing and subsequent execution of the text of
EXPR until run time.
In the second form, the code within the BLOCK is parsed only once--at the same
time the code surrounding the "eval" itself was parsed--and executed within the
context of the current Perl program. This form is typically used to trap
exceptions more efficiently than the first (see below), while also providing the
benefit of checking the code within BLOCK at compile time.
The final semicolon, if any, may be omitted from the value of EXPR or within the
BLOCK.
In both forms, the value returned is the value of the last expression evaluated
inside the mini-program; a return statement may be also used, just as with
subroutines. The expression providing the return value is evaluated in void,
scalar, or list context, depending on the context of the "eval" itself. See
"wantarray" for more on how the evaluation context can be determined.
If there is a syntax error or runtime error, or a "die" statement is executed, an
undefined value is returned by "eval", and $@ is set to the error message. If
there was no error, $@ is guaranteed to be a null string. Beware that using
"eval" neither silences perl from printing warnings to STDERR, nor does it stuff
the text of warning messages into $@. To do either of those, you have to use the
$SIG{__WARN__} facility, or turn off warnings inside the BLOCK or EXPR using
"no warnings 'all'". See "warn", perlvar, warnings and perllexwarn.
Note that, because "eval" traps otherwise-fatal errors, it is useful for
determining whether a particular feature (such as "socket" or "symlink") is
implemented. It is also Perl's exception trapping mechanism, where the die
operator is used to raise exceptions.
If you want to trap errors when loading an XS module, some problems with the
binary interface (such as Perl version skew) may be fatal even with "eval" unless
$ENV{PERL_DL_NONLAZY} is set. See perlrun.
If the code to be executed doesn't vary, you may use the eval-BLOCK form to trap
run-time errors without incurring the penalty of recompiling each time. The
error, if any, is still returned in $@. Examples:
# make divide-by-zero nonfatal
eval { $answer = $a / $b; }; warn $@ if $@;
# same thing, but less efficient
eval '$answer = $a / $b'; warn $@ if $@;
# a compile-time error
eval { $answer = }; # WRONG
# a run-time error
eval '$answer ='; # sets $@
Using the "eval{}" form as an exception trap in libraries does have some issues.
Due to the current arguably broken state of "__DIE__" hooks, you may wish not to
trigger any "__DIE__" hooks that user code may have installed. You can use the
"local $SIG{__DIE__}" construct for this purpose, as shown in this example:
# a very private exception trap for divide-by-zero
eval { local $SIG{'__DIE__'}; $answer = $a / $b; };
warn $@ if $@;
This is especially significant, given that "__DIE__" hooks can call "die" again,
which has the effect of changing their error messages:
# __DIE__ hooks may modify error messages
{
local $SIG{'__DIE__'} =
sub { (my $x = $_[0]) =~ s/foo/bar/g; die $x };
eval { die "foo lives here" };
print $@ if $@; # prints "bar lives here"
}
Because this promotes action at a distance, this counterintuitive behavior may be
fixed in a future release.
With an "eval", you should be especially careful to remember what's being looked
at when:
eval $x; # CASE 1
eval "$x"; # CASE 2
eval '$x'; # CASE 3
eval { $x }; # CASE 4
eval "\$$x++"; # CASE 5
$$x++; # CASE 6
Cases 1 and 2 above behave identically: they run the code contained in the
variable $x. (Although case 2 has misleading double quotes making the reader
wonder what else might be happening (nothing is).) Cases 3 and 4 likewise behave
in the same way: they run the code '$x', which does nothing but return the value
of $x. (Case 4 is preferred for purely visual reasons, but it also has the
advantage of compiling at compile-time instead of at run-time.) Case 5 is a place
where normally you would like to use double quotes, except that in this particular
situation, you can just use symbolic references instead, as in case 6.
"eval BLOCK" does not count as a loop, so the loop control statements "next",
"last", or "redo" cannot be used to leave or restart the block.
Note that as a very special case, an "eval ''" executed within the "DB" package
doesn't see the usual surrounding lexical scope, but rather the scope of the first
non-DB piece of code that called it. You don't normally need to worry about this
unless you are writing a Perl debugger.
exec LIST
exec PROGRAM LIST
The "exec" function executes a system command and never returns-- use "system"
instead of "exec" if you want it to return. It fails and returns false only if
the command does not exist and it is executed directly instead of via your
system's command shell (see below).
Since it's a common mistake to use "exec" instead of "system", Perl warns you if
there is a following statement which isn't "die", "warn", or "exit" (if "-w" is
set - but you always do that). If you really want to follow an "exec" with
some other statement, you can use one of these styles to avoid the warning:
exec ('foo') or print STDERR "couldn't exec foo: $!";
{ exec ('foo') }; print STDERR "couldn't exec foo: $!";
If there is more than one argument in LIST, or if LIST is an array with more than
one value, calls execvp(3) with the arguments in LIST. If there is only one
scalar argument or an array with one element in it, the argument is checked for
shell metacharacters, and if there are any, the entire argument is passed to the
system's command shell for parsing (this is "/bin/sh -c" on Unix platforms, but
varies on other platforms). If there are no shell metacharacters in the argument,
it is split into words and passed directly to "execvp", which is more efficient.
Examples:
exec '/bin/echo', 'Your arguments are: ', @ARGV;
exec "sort $outfile | uniq";
If you don't really want to execute the first argument, but want to lie to the
program you are executing about its own name, you can specify the program you
actually want to run as an "indirect object" (without a comma) in front of the
LIST. (This always forces interpretation of the LIST as a multivalued list, even
if there is only a single scalar in the list.) Example:
$shell = '/bin/csh';
exec $shell '-sh'; # pretend it's a login shell
or, more directly,
exec {'/bin/csh'} '-sh'; # pretend it's a login shell
When the arguments get executed via the system shell, results will be subject to
its quirks and capabilities. See "`STRING`" in perlop for details.
Using an indirect object with "exec" or "system" is also more secure. This usage
(which also works fine with system()) forces interpretation of the arguments as a
multivalued list, even if the list had just one argument. That way you're safe
from the shell expanding wildcards or splitting up words with whitespace in them.
@args = ( "echo surprise" );
exec @args; # subject to shell escapes
# if @args == 1
exec { $args[0] } @args; # safe even with one-arg list
The first version, the one without the indirect object, ran the echo program,
passing it "surprise" an argument. The second version didn't--it tried to run a
program literally called "echo surprise", didn't find it, and set $? to a non-zero
value indicating failure.
Beginning with v5.6.0, Perl will attempt to flush all files opened for output
before the exec, but this may not be supported on some platforms (see perlport).
To be safe, you may need to set $| ($AUTOFLUSH in English) or call the
"autoflush()" method of "IO::Handle" on any open handles in order to avoid lost
output.
Note that "exec" will not call your "END" blocks, nor will it call any "DESTROY"
methods in your objects.
exists EXPR
Given an expression that specifies a hash element or array element, returns true
if the specified element in the hash or array has ever been initialized, even if
the corresponding value is undefined. The element is not autovivified if it
doesn't exist.
print "Exists\n" if exists $hash{$key};
print "Defined\n" if defined $hash{$key};
print "True\n" if $hash{$key};
print "Exists\n" if exists $array[$index];
print "Defined\n" if defined $array[$index];
print "True\n" if $array[$index];
A hash or array element can be true only if it's defined, and defined if it
exists, but the reverse doesn't necessarily hold true.
Given an expression that specifies the name of a subroutine, returns true if the
specified subroutine has ever been declared, even if it is undefined. Mentioning
a subroutine name for exists or defined does not count as declaring it. Note that
a subroutine which does not exist may still be callable: its package may have an
"AUTOLOAD" method that makes it spring into existence the first time that it is
called -- see perlsub.
print "Exists\n" if exists &subroutine;
print "Defined\n" if defined &subroutine;
Note that the EXPR can be arbitrarily complicated as long as the final operation
is a hash or array key lookup or subroutine name:
if (exists $ref->{A}->{B}->{$key}) { }
if (exists $hash{A}{B}{$key}) { }
if (exists $ref->{A}->{B}->[$ix]) { }
if (exists $hash{A}{B}[$ix]) { }
if (exists &{$ref->{A}{B}{$key}}) { }
Although the deepest nested array or hash will not spring into existence just
because its existence was tested, any intervening ones will. Thus "$ref->{"A"}"
and "$ref->{"A"}->{"B"}" will spring into existence due to the existence test for
the $key element above. This happens anywhere the arrow operator is used,
including even:
undef $ref;
if (exists $ref->{"Some key"}) { }
print $ref; # prints HASH(0x80d3d5c)
This surprising autovivification in what does not at first--or even second--glance
appear to be an lvalue context may be fixed in a future release.
Use of a subroutine call, rather than a subroutine name, as an argument to
exists() is an error.
exists ⊂ # OK
exists &sub(); # Error
exit EXPR
exit Evaluates EXPR and exits immediately with that value. Example:
$ans = <STDIN>;
exit 0 if $ans =~ /^[Xx]/;
See also "die". If EXPR is omitted, exits with 0 status. The only universally
recognized values for EXPR are 0 for success and 1 for error; other values are
subject to interpretation depending on the environment in which the Perl program
is running. For example, exiting 69 (EX_UNAVAILABLE) from a sendmail incoming-
mail filter will cause the mailer to return the item undelivered, but that's not
true everywhere.
Don't use "exit" to abort a subroutine if there's any chance that someone might
want to trap whatever error happened. Use "die" instead, which can be trapped by
an "eval".
The exit() function does not always exit immediately. It calls any defined "END"
routines first, but these "END" routines may not themselves abort the exit.
Likewise any object destructors that need to be called are called before the real
exit. If this is a problem, you can call "POSIX:_exit($status)" to avoid END and
destructor processing. See perlmod for details.
exp EXPR
exp Returns e (the natural logarithm base) to the power of EXPR. If EXPR is omitted,
gives "exp($_)".
fcntl FILEHANDLE,FUNCTION,SCALAR
Implements the fcntl(2) function. You'll probably have to say
use Fcntl;
first to get the correct constant definitions. Argument processing and value
return works just like "ioctl" below. For example:
use Fcntl;
fcntl($filehandle, F_GETFL, $packed_return_buffer)
or die "can't fcntl F_GETFL: $!";
You don't have to check for "defined" on the return from "fcntl". Like "ioctl",
it maps a 0 return from the system call into "0 but true" in Perl. This string is
true in boolean context and 0 in numeric context. It is also exempt from the
normal -w warnings on improper numeric conversions.
Note that "fcntl" will produce a fatal error if used on a machine that doesn't
implement fcntl(2). See the Fcntl module or your fcntl(2) manpage to learn what
functions are available on your system.
Here's an example of setting a filehandle named "REMOTE" to be non-blocking at the
system level. You'll have to negotiate $| on your own, though.
use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK);
$flags = fcntl(REMOTE, F_GETFL, 0)
or die "Can't get flags for the socket: $!\n";
$flags = fcntl(REMOTE, F_SETFL, $flags | O_NONBLOCK)
or die "Can't set flags for the socket: $!\n";
fileno FILEHANDLE
Returns the file descriptor for a filehandle, or undefined if the filehandle is
not open. This is mainly useful for constructing bitmaps for "select" and low-
level POSIX tty-handling operations. If FILEHANDLE is an expression, the value is
taken as an indirect filehandle, generally its name.
You can use this to find out whether two handles refer to the same underlying
descriptor:
if (fileno(THIS) == fileno(THAT)) {
print "THIS and THAT are dups\n";
}
(Filehandles connected to memory objects via new features of "open" may return
undefined even though they are open.)
flock FILEHANDLE,OPERATION
Calls flock(2), or an emulation of it, on FILEHANDLE. Returns true for success,
false on failure. Produces a fatal error if used on a machine that doesn't
implement flock(2), fcntl(2) locking, or lockf(3). "flock" is Perl's portable
file locking interface, although it locks only entire files, not records.
Two potentially non-obvious but traditional "flock" semantics are that it waits
indefinitely until the lock is granted, and that its locks merely advisory. Such
discretionary locks are more flexible, but offer fewer guarantees. This means
that programs that do not also use "flock" may modify files locked with "flock".
See perlport, your port's specific documentation, or your system-specific local
manpages for details. It's best to assume traditional behavior if you're writing
portable programs. (But if you're not, you should as always feel perfectly free
to write for your own system's idiosyncrasies (sometimes called "features").
Slavish adherence to portability concerns shouldn't get in the way of your getting
your job done.)
OPERATION is one of LOCK_SH, LOCK_EX, or LOCK_UN, possibly combined with LOCK_NB.
These constants are traditionally valued 1, 2, 8 and 4, but you can use the
symbolic names if you import them from the Fcntl module, either individually, or
as a group using the ':flock' tag. LOCK_SH requests a shared lock, LOCK_EX
requests an exclusive lock, and LOCK_UN releases a previously requested lock. If
LOCK_NB is bitwise-or'ed with LOCK_SH or LOCK_EX then "flock" will return
immediately rather than blocking waiting for the lock (check the return status to
see if you got it).
To avoid the possibility of miscoordination, Perl now flushes FILEHANDLE before
locking or unlocking it.
Note that the emulation built with lockf(3) doesn't provide shared locks, and it
requires that FILEHANDLE be open with write intent. These are the semantics that
lockf(3) implements. Most if not all systems implement lockf(3) in terms of
fcntl(2) locking, though, so the differing semantics shouldn't bite too many
people.
Note that the fcntl(2) emulation of flock(3) requires that FILEHANDLE be open with
read intent to use LOCK_SH and requires that it be open with write intent to use
LOCK_EX.
Note also that some versions of "flock" cannot lock things over the network; you
would need to use the more system-specific "fcntl" for that. If you like you can
force Perl to ignore your system's flock(2) function, and so provide its own
fcntl(2)-based emulation, by passing the switch "-Ud_flock" to the Configure
program when you configure perl.
Here's a mailbox appender for BSD systems.
use Fcntl ':flock'; # import LOCK_* constants
sub lock {
flock(MBOX,LOCK_EX);
# and, in case someone appended
# while we were waiting...
seek(MBOX, 0, 2);
}
sub unlock {
flock(MBOX,LOCK_UN);
}
open(MBOX, ">>/usr/spool/mail/$ENV{'USER'}")
or die "Can't open mailbox: $!";
lock();
print MBOX $msg,"\n\n";
unlock();
On systems that support a real flock(), locks are inherited across fork() calls,
whereas those that must resort to the more capricious fcntl() function lose the
locks, making it harder to write servers.
See also DB_File for other flock() examples.
fork Does a fork(2) system call to create a new process running the same program at the
same point. It returns the child pid to the parent process, 0 to the child
process, or "undef" if the fork is unsuccessful. File descriptors (and sometimes
locks on those descriptors) are shared, while everything else is copied. On most
systems supporting fork(), great care has gone into making it extremely efficient
(for example, using copy-on-write technology on data pages), making it the
dominant paradigm for multitasking over the last few decades.
Beginning with v5.6.0, Perl will attempt to flush all files opened for output
before forking the child process, but this may not be supported on some platforms
(see perlport). To be safe, you may need to set $| ($AUTOFLUSH in English) or
call the "autoflush()" method of "IO::Handle" on any open handles in order to
avoid duplicate output.
If you "fork" without ever waiting on your children, you will accumulate zombies.
On some systems, you can avoid this by setting $SIG{CHLD} to "IGNORE". See also
perlipc for more examples of forking and reaping moribund children.
Note that if your forked child inherits system file descriptors like STDIN and
STDOUT that are actually connected by a pipe or socket, even if you exit, then the
remote server (such as, say, a CGI script or a backgrounded job launched from a
remote shell) won't think you're done. You should reopen those to /dev/null if
it's any issue.
format Declare a picture format for use by the "write" function. For example:
format Something =
Test: @<<<<<<<< @||||| @>>>>>
$str, $%, '$' . int($num)
.
$str = "widget";
$num = $cost/$quantity;
$~ = 'Something';
write;
See perlform for many details and examples.
formline PICTURE,LIST
This is an internal function used by "format"s, though you may call it, too. It
formats (see perlform) a list of values according to the contents of PICTURE,
placing the output into the format output accumulator, $^A (or $ACCUMULATOR in
English). Eventually, when a "write" is done, the contents of $^A are written to
some filehandle. You could also read $^A and then set $^A back to "". Note that
a format typically does one "formline" per line of form, but the "formline"
function itself doesn't care how many newlines are embedded in the PICTURE. This
means that the "~" and "~~" tokens will treat the entire PICTURE as a single line.
You may therefore need to use multiple formlines to implement a single record
format, just like the format compiler.
Be careful if you put double quotes around the picture, because an "@" character
may be taken to mean the beginning of an array name. "formline" always returns
true. See perlform for other examples.
getc FILEHANDLE
getc Returns the next character from the input file attached to FILEHANDLE, or the
undefined value at end of file, or if there was an error (in the latter case $! is
set). If FILEHANDLE is omitted, reads from STDIN. This is not particularly
efficient. However, it cannot be used by itself to fetch single characters
without waiting for the user to hit enter. For that, try something more like:
if ($BSD_STYLE) {
system "stty cbreak </dev/tty >/dev/tty 2>&1";
}
else {
system "stty", '-icanon', 'eol', "\001";
}
$key = getc(STDIN);
if ($BSD_STYLE) {
system "stty -cbreak </dev/tty >/dev/tty 2>&1";
}
else {
system "stty", 'icanon', 'eol', '^@'; # ASCII null
}
print "\n";
Determination of whether $BSD_STYLE should be set is left as an exercise to the
reader.
The "POSIX::getattr" function can do this more portably on systems purporting
POSIX compliance. See also the "Term::ReadKey" module from your nearest CPAN
site; details on CPAN can be found on "CPAN" in perlmodlib.
getlogin
This implements the C library function of the same name, which on most systems
returns the current login from /etc/utmp, if any. If null, use "getpwuid".
$login = getlogin || getpwuid($<) || "Kilroy";
Do not consider "getlogin" for authentication: it is not as secure as "getpwuid".
getpeername SOCKET
Returns the packed sockaddr address of other end of the SOCKET connection.
use Socket;
$hersockaddr = getpeername(SOCK);
($port, $iaddr) = sockaddr_in($hersockaddr);
$herhostname = gethostbyaddr($iaddr, AF_INET);
$herstraddr = inet_ntoa($iaddr);
getpgrp PID
Returns the current process group for the specified PID. Use a PID of 0 to get
the current process group for the current process. Will raise an exception if
used on a machine that doesn't implement getpgrp(2). If PID is omitted, returns
process group of current process. Note that the POSIX version of "getpgrp" does
not accept a PID argument, so only "PID==0" is truly portable.
getppid Returns the process id of the parent process.
Note for Linux users: on Linux, the C functions "getpid()" and "getppid()" return
different values from different threads. In order to be portable, this behavior is
not reflected by the perl-level function "getppid()", that returns a consistent
value across threads. If you want to call the underlying "getppid()", you may use
the CPAN module "Linux::Pid".
getpriority WHICH,WHO
Returns the current priority for a process, a process group, or a user. (See
getpriority(2).) Will raise a fatal exception if used on a machine that doesn't
implement getpriority(2).
getpwnam NAME
getgrnam NAME
gethostbyname NAME
getnetbyname NAME
getprotobyname NAME
getpwuid UID
getgrgid GID
getservbyname NAME,PROTO
gethostbyaddr ADDR,ADDRTYPE
getnetbyaddr ADDR,ADDRTYPE
getprotobynumber NUMBER
getservbyport PORT,PROTO
getpwent
getgrent
gethostent
getnetent
getprotoent
getservent
setpwent
setgrent
sethostent STAYOPEN
setnetent STAYOPEN
setprotoent STAYOPEN
setservent STAYOPEN
endpwent
endgrent
endhostent
endnetent
endprotoent
endservent
These routines perform the same functions as their counterparts in the system
library. In list context, the return values from the various get routines are as
follows:
($name,$passwd,$uid,$gid,
$quota,$comment,$gcos,$dir,$shell,$expire) = getpw*
($name,$passwd,$gid,$members) = getgr*
($name,$aliases,$addrtype,$length,@addrs) = gethost*
($name,$aliases,$addrtype,$net) = getnet*
($name,$aliases,$proto) = getproto*
($name,$aliases,$port,$proto) = getserv*
(If the entry doesn't exist you get a null list.)
The exact meaning of the $gcos field varies but it usually contains the real name
of the user (as opposed to the login name) and other information pertaining to the
user. Beware, however, that in many system users are able to change this
information and therefore it cannot be trusted and therefore the $gcos is tainted
(see perlsec). The $passwd and $shell, user's encrypted password and login shell,
are also tainted, because of the same reason.
In scalar context, you get the name, unless the function was a lookup by name, in
which case you get the other thing, whatever it is. (If the entry doesn't exist
you get the undefined value.) For example:
$uid = getpwnam($name);
$name = getpwuid($num);
$name = getpwent();
$gid = getgrnam($name);
$name = getgrgid($num);
$name = getgrent();
#etc.
In getpw*() the fields $quota, $comment, and $expire are special cases in the
sense that in many systems they are unsupported. If the $quota is unsupported, it
is an empty scalar. If it is supported, it usually encodes the disk quota. If
the $comment field is unsupported, it is an empty scalar. If it is supported it
usually encodes some administrative comment about the user. In some systems the
$quota field may be $change or $age, fields that have to do with password aging.
In some systems the $comment field may be $class. The $expire field, if present,
encodes the expiration period of the account or the password. For the
availability and the exact meaning of these fields in your system, please consult
your getpwnam(3) documentation and your pwd.h file. You can also find out from
within Perl what your $quota and $comment fields mean and whether you have the
$expire field by using the "Config" module and the values "d_pwquota", "d_pwage",
"d_pwchange", "d_pwcomment", and "d_pwexpire". Shadow password files are only
supported if your vendor has implemented them in the intuitive fashion that
calling the regular C library routines gets the shadow versions if you're running
under privilege or if there exists the shadow(3) functions as found in System V
(this includes Solaris and Linux.) Those systems that implement a proprietary
shadow password facility are unlikely to be supported.
The $members value returned by getgr*() is a space separated list of the login
names of the members of the group.
For the gethost*() functions, if the "h_errno" variable is supported in C, it will
be returned to you via $? if the function call fails. The @addrs value returned
by a successful call is a list of the raw addresses returned by the corresponding
system library call. In the Internet domain, each address is four bytes long and
you can unpack it by saying something like:
($a,$b,$c,$d) = unpack('W4',$addr[0]);
The Socket library makes this slightly easier:
use Socket;
$iaddr = inet_aton("127.1"); # or whatever address
$name = gethostbyaddr($iaddr, AF_INET);
# or going the other way
$straddr = inet_ntoa($iaddr);
In the opposite way, to resolve a hostname to the IP address you can write this:
use Socket;
$packed_ip = gethostbyname("www.perl.org");
if (defined $packed_ip) {
$ip_address = inet_ntoa($packed_ip);
}
Make sure <gethostbyname()> is called in SCALAR context and that its return value
is checked for definedness.
If you get tired of remembering which element of the return list contains which
return value, by-name interfaces are provided in standard modules: "File::stat",
"Net::hostent", "Net::netent", "Net::protoent", "Net::servent", "Time::gmtime",
"Time::localtime", and "User::grent". These override the normal built-ins,
supplying versions that return objects with the appropriate names for each field.
For example:
use File::stat;
use User::pwent;
$is_his = (stat($filename)->uid == pwent($whoever)->uid);
Even though it looks like they're the same method calls (uid), they aren't,
because a "File::stat" object is different from a "User::pwent" object.
getsockname SOCKET
Returns the packed sockaddr address of this end of the SOCKET connection, in case
you don't know the address because you have several different IPs that the
connection might have come in on.
use Socket;
$mysockaddr = getsockname(SOCK);
($port, $myaddr) = sockaddr_in($mysockaddr);
printf "Connect to %s [%s]\n",
scalar gethostbyaddr($myaddr, AF_INET),
inet_ntoa($myaddr);
getsockopt SOCKET,LEVEL,OPTNAME
Queries the option named OPTNAME associated with SOCKET at a given LEVEL. Options
may exist at multiple protocol levels depending on the socket type, but at least
the uppermost socket level SOL_SOCKET (defined in the "Socket" module) will exist.
To query options at another level the protocol number of the appropriate protocol
controlling the option should be supplied. For example, to indicate that an option
is to be interpreted by the TCP protocol, LEVEL should be set to the protocol
number of TCP, which you can get using getprotobyname.
The call returns a packed string representing the requested socket option, or
"undef" if there is an error (the error reason will be in $!). What exactly is in
the packed string depends in the LEVEL and OPTNAME, consult your system
documentation for details. A very common case however is that the option is an
integer, in which case the result will be a packed integer which you can decode
using unpack with the "i" (or "I") format.
An example testing if Nagle's algorithm is turned on on a socket:
use Socket qw(:all);
defined(my $tcp = getprotobyname("tcp"))
or die "Could not determine the protocol number for tcp";
# my $tcp = IPPROTO_TCP; # Alternative
my $packed = getsockopt($socket, $tcp, TCP_NODELAY)
or die "Could not query TCP_NODELAY socket option: $!";
my $nodelay = unpack("I", $packed);
print "Nagle's algorithm is turned ", $nodelay ? "off\n" : "on\n";
glob EXPR
glob In list context, returns a (possibly empty) list of filename expansions on the
value of EXPR such as the standard Unix shell /bin/csh would do. In scalar
context, glob iterates through such filename expansions, returning undef when the
list is exhausted. This is the internal function implementing the "<*.c>"
operator, but you can use it directly. If EXPR is omitted, $_ is used. The
"<*.c>" operator is discussed in more detail in "I/O Operators" in perlop.
Beginning with v5.6.0, this operator is implemented using the standard
"File::Glob" extension. See File::Glob for details.
gmtime EXPR
gmtime Works just like localtime but the returned values are localized for the standard
Greenwich time zone.
Note: when called in list context, $isdst, the last value returned by gmtime is
always 0. There is no Daylight Saving Time in GMT.
See "gmtime" in perlport for portability concerns.
goto LABEL
goto EXPR
goto &NAME
The "goto-LABEL" form finds the statement labeled with LABEL and resumes execution
there. It may not be used to go into any construct that requires initialization,
such as a subroutine or a "foreach" loop. It also can't be used to go into a
construct that is optimized away, or to get out of a block or subroutine given to
"sort". It can be used to go almost anywhere else within the dynamic scope,
including out of subroutines, but it's usually better to use some other construct
such as "last" or "die". The author of Perl has never felt the need to use this
form of "goto" (in Perl, that is--C is another matter). (The difference being
that C does not offer named loops combined with loop control. Perl does, and this
replaces most structured uses of "goto" in other languages.)
The "goto-EXPR" form expects a label name, whose scope will be resolved
dynamically. This allows for computed "goto"s per FORTRAN, but isn't necessarily
recommended if you're optimizing for maintainability:
goto ("FOO", "BAR", "GLARCH")[$i];
The "goto-&NAME" form is quite different from the other forms of "goto". In fact,
it isn't a goto in the normal sense at all, and doesn't have the stigma associated
with other gotos. Instead, it exits the current subroutine (losing any changes
set by local()) and immediately calls in its place the named subroutine using the
current value of @_. This is used by "AUTOLOAD" subroutines that wish to load
another subroutine and then pretend that the other subroutine had been called in
the first place (except that any modifications to @_ in the current subroutine are
propagated to the other subroutine.) After the "goto", not even "caller" will be
able to tell that this routine was called first.
NAME needn't be the name of a subroutine; it can be a scalar variable containing a
code reference, or a block that evaluates to a code reference.
grep BLOCK LIST
grep EXPR,LIST
This is similar in spirit to, but not the same as, grep(1) and its relatives. In
particular, it is not limited to using regular expressions.
Evaluates the BLOCK or EXPR for each element of LIST (locally setting $_ to each
element) and returns the list value consisting of those elements for which the
expression evaluated to true. In scalar context, returns the number of times the
expression was true.
@foo = grep(!/^#/, @bar); # weed out comments
or equivalently,
@foo = grep {!/^#/} @bar; # weed out comments
Note that $_ is an alias to the list value, so it can be used to modify the
elements of the LIST. While this is useful and supported, it can cause bizarre
results if the elements of LIST are not variables. Similarly, grep returns
aliases into the original list, much as a for loop's index variable aliases the
list elements. That is, modifying an element of a list returned by grep (for
example, in a "foreach", "map" or another "grep") actually modifies the element in
the original list. This is usually something to be avoided when writing clear
code.
If $_ is lexical in the scope where the "grep" appears (because it has been
declared with "my $_") then, in addition to being locally aliased to the list
elements, $_ keeps being lexical inside the block; i.e. it can't be seen from the
outside, avoiding any potential side-effects.
See also "map" for a list composed of the results of the BLOCK or EXPR.
hex EXPR
hex Interprets EXPR as a hex string and returns the corresponding value. (To convert
strings that might start with either 0, "0x", or "0b", see "oct".) If EXPR is
omitted, uses $_.
print hex '0xAf'; # prints '175'
print hex 'aF'; # same
Hex strings may only represent integers. Strings that would cause integer
overflow trigger a warning. Leading whitespace is not stripped, unlike oct(). To
present something as hex, look into "printf", "sprintf", or "unpack".
import LIST
There is no builtin "import" function. It is just an ordinary method (subroutine)
defined (or inherited) by modules that wish to export names to another module.
The "use" function calls the "import" method for the package used. See also
"use", perlmod, and Exporter.
index STR,SUBSTR,POSITION
index STR,SUBSTR
The index function searches for one string within another, but without the
wildcard-like behavior of a full regular-expression pattern match. It returns the
position of the first occurrence of SUBSTR in STR at or after POSITION. If
POSITION is omitted, starts searching from the beginning of the string. POSITION
before the beginning of the string or after its end is treated as if it were the
beginning or the end, respectively. POSITION and the return value are based at 0
(or whatever you've set the $[ variable to--but don't do that). If the substring
is not found, "index" returns one less than the base, ordinarily "-1".
int EXPR
int Returns the integer portion of EXPR. If EXPR is omitted, uses $_. You should not
use this function for rounding: one because it truncates towards 0, and two
because machine representations of floating point numbers can sometimes produce
counterintuitive results. For example, "int(-6.725/0.025)" produces -268 rather
than the correct -269; that's because it's really more like
-268.99999999999994315658 instead. Usually, the "sprintf", "printf", or the
"POSIX::floor" and "POSIX::ceil" functions will serve you better than will int().
ioctl FILEHANDLE,FUNCTION,SCALAR
Implements the ioctl(2) function. You'll probably first have to say
require "sys/ioctl.ph"; # probably in $Config{archlib}/sys/ioctl.ph
to get the correct function definitions. If sys/ioctl.ph doesn't exist or doesn't
have the correct definitions you'll have to roll your own, based on your C header
files such as <sys/ioctl.h>. (There is a Perl script called h2ph that comes with
the Perl kit that may help you in this, but it's nontrivial.) SCALAR will be read
and/or written depending on the FUNCTION--a pointer to the string value of SCALAR
will be passed as the third argument of the actual "ioctl" call. (If SCALAR has
no string value but does have a numeric value, that value will be passed rather
than a pointer to the string value. To guarantee this to be true, add a 0 to the
scalar before using it.) The "pack" and "unpack" functions may be needed to
manipulate the values of structures used by "ioctl".
The return value of "ioctl" (and "fcntl") is as follows:
if OS returns: then Perl returns:
-1 undefined value
0 string "0 but true"
anything else that number
Thus Perl returns true on success and false on failure, yet you can still easily
determine the actual value returned by the operating system:
$retval = ioctl(...) || -1;
printf "System returned %d\n", $retval;
The special string "0 but true" is exempt from -w complaints about improper
numeric conversions.
join EXPR,LIST
Joins the separate strings of LIST into a single string with fields separated by
the value of EXPR, and returns that new string. Example:
$rec = join(':', $login,$passwd,$uid,$gid,$gcos,$home,$shell);
Beware that unlike "split", "join" doesn't take a pattern as its first argument.
Compare "split".
keys HASH
Returns a list consisting of all the keys of the named hash. (In scalar context,
returns the number of keys.)
The keys are returned in an apparently random order. The actual random order is
subject to change in future versions of perl, but it is guaranteed to be the same
order as either the "values" or "each" function produces (given that the hash has
not been modified). Since Perl 5.8.1 the ordering is different even between
different runs of Perl for security reasons (see "Algorithmic Complexity Attacks"
in perlsec).
As a side effect, calling keys() resets the HASH's internal iterator (see "each").
In particular, calling keys() in void context resets the iterator with no other
overhead.
Here is yet another way to print your environment:
@keys = keys %ENV;
@values = values %ENV;
while (@keys) {
print pop(@keys), '=', pop(@values), "\n";
}
or how about sorted by key:
foreach $key (sort(keys %ENV)) {
print $key, '=', $ENV{$key}, "\n";
}
The returned values are copies of the original keys in the hash, so modifying them
will not affect the original hash. Compare "values".
To sort a hash by value, you'll need to use a "sort" function. Here's a
descending numeric sort of a hash by its values:
foreach $key (sort { $hash{$b} <=> $hash{$a} } keys %hash) {
printf "%4d %s\n", $hash{$key}, $key;
}
As an lvalue "keys" allows you to increase the number of hash buckets allocated
for the given hash. This can gain you a measure of efficiency if you know the
hash is going to get big. (This is similar to pre-extending an array by assigning
a larger number to $#array.) If you say
keys %hash = 200;
then %hash will have at least 200 buckets allocated for it--256 of them, in fact,
since it rounds up to the next power of two. These buckets will be retained even
if you do "%hash = ()", use "undef %hash" if you want to free the storage while
%hash is still in scope. You can't shrink the number of buckets allocated for the
hash using "keys" in this way (but you needn't worry about doing this by accident,
as trying has no effect).
See also "each", "values" and "sort".
kill SIGNAL, LIST
Sends a signal to a list of processes. Returns the number of processes
successfully signaled (which is not necessarily the same as the number actually
killed).
$cnt = kill 1, $child1, $child2;
kill 9, @goners;
If SIGNAL is zero, no signal is sent to the process, but the kill(2) system call
will check whether it's possible to send a signal to it (that means, to be brief,
that the process is owned by the same user, or we are the super-user). This is a
useful way to check that a child process is alive (even if only as a zombie) and
hasn't changed its UID. See perlport for notes on the portability of this
construct.
Unlike in the shell, if SIGNAL is negative, it kills process groups instead of
processes. (On System V, a negative PROCESS number will also kill process groups,
but that's not portable.) That means you usually want to use positive not
negative signals. You may also use a signal name in quotes.
See "Signals" in perlipc for more details.
last LABEL
last The "last" command is like the "break" statement in C (as used in loops); it
immediately exits the loop in question. If the LABEL is omitted, the command
refers to the innermost enclosing loop. The "continue" block, if any, is not
executed:
LINE: while (<STDIN>) {
last LINE if /^$/; # exit when done with header
#...
}
"last" cannot be used to exit a block which returns a value such as "eval {}",
"sub {}" or "do {}", and should not be used to exit a grep() or map() operation.
Note that a block by itself is semantically identical to a loop that executes
once. Thus "last" can be used to effect an early exit out of such a block.
See also "continue" for an illustration of how "last", "next", and "redo" work.
lc EXPR
lc Returns a lowercased version of EXPR. This is the internal function implementing
the "\L" escape in double-quoted strings. Respects current LC_CTYPE locale if
"use locale" in force. See perllocale and perlunicode for more details about
locale and Unicode support.
If EXPR is omitted, uses $_.
lcfirst EXPR
lcfirst Returns the value of EXPR with the first character lowercased. This is the
internal function implementing the "\l" escape in double-quoted strings. Respects
current LC_CTYPE locale if "use locale" in force. See perllocale and perlunicode
for more details about locale and Unicode support.
If EXPR is omitted, uses $_.
length EXPR
length Returns the length in characters of the value of EXPR. If EXPR is omitted,
returns length of $_. Note that this cannot be used on an entire array or hash to
find out how many elements these have. For that, use "scalar @array" and "scalar
keys %hash" respectively.
Note the characters: if the EXPR is in Unicode, you will get the number of
characters, not the number of bytes. To get the length of the internal string in
bytes, use "bytes::length(EXPR)", see bytes. Note that the internal encoding is
variable, and the number of bytes usually meaningless. To get the number of bytes
that the string would have when encoded as UTF-8, use
"length(Encoding::encode_utf8(EXPR))".
link OLDFILE,NEWFILE
Creates a new filename linked to the old filename. Returns true for success,
false otherwise.
listen SOCKET,QUEUESIZE
Does the same thing that the listen system call does. Returns true if it
succeeded, false otherwise. See the example in "Sockets: Client/Server
Communication" in perlipc.
local EXPR
You really probably want to be using "my" instead, because "local" isn't what most
people think of as "local". See "Private Variables via my()" in perlsub for
details.
A local modifies the listed variables to be local to the enclosing block, file, or
eval. If more than one value is listed, the list must be placed in parentheses.
See "Temporary Values via local()" in perlsub for details, including issues with
tied arrays and hashes.
localtime EXPR
localtime
Converts a time as returned by the time function to a 9-element list with the time
analyzed for the local time zone. Typically used as follows:
# 0 1 2 3 4 5 6 7 8
($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) =
localtime(time);
All list elements are numeric, and come straight out of the C `struct tm'. $sec,
$min, and $hour are the seconds, minutes, and hours of the specified time.
$mday is the day of the month, and $mon is the month itself, in the range 0..11
with 0 indicating January and 11 indicating December. This makes it easy to get a
month name from a list:
my @abbr = qw( Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec );
print "$abbr[$mon] $mday";
# $mon=9, $mday=18 gives "Oct 18"
$year is the number of years since 1900, not just the last two digits of the year.
That is, $year is 123 in year 2023. The proper way to get a complete 4-digit year
is simply:
$year += 1900;
Otherwise you create non-Y2K-compliant programs--and you wouldn't want to do that,
would you?
To get the last two digits of the year (e.g., '01' in 2001) do:
$year = sprintf("%02d", $year % 100);
$wday is the day of the week, with 0 indicating Sunday and 3 indicating Wednesday.
$yday is the day of the year, in the range 0..364 (or 0..365 in leap years.)
$isdst is true if the specified time occurs during Daylight Saving Time, false
otherwise.
If EXPR is omitted, "localtime()" uses the current time ("localtime(time)").
In scalar context, "localtime()" returns the ctime(3) value:
$now_string = localtime; # e.g., "Thu Oct 13 04:54:34 1994"
This scalar value is not locale dependent but is a Perl builtin. For GMT instead
of local time use the "gmtime" builtin. See also the "Time::Local" module (to
convert the second, minutes, hours, ... back to the integer value returned by
time()), and the POSIX module's strftime(3) and mktime(3) functions.
To get somewhat similar but locale dependent date strings, set up your locale
environment variables appropriately (please see perllocale) and try for example:
use POSIX qw(strftime);
$now_string = strftime "%a %b %e %H:%M:%S %Y", localtime;
# or for GMT formatted appropriately for your locale:
$now_string = strftime "%a %b %e %H:%M:%S %Y", gmtime;
Note that the %a and %b, the short forms of the day of the week and the month of
the year, may not necessarily be three characters wide.
See "localtime" in perlport for portability concerns.
The Time::gmtime and Time::localtime modules provides a convenient, by-name access
mechanism to the gmtime() and localtime() functions, respectively.
For a comprehensive date and time representation look at the DateTime module on
CPAN.
lock THING
This function places an advisory lock on a shared variable, or referenced object
contained in THING until the lock goes out of scope.
lock() is a "weak keyword" : this means that if you've defined a function by this
name (before any calls to it), that function will be called instead. (However, if
you've said "use threads", lock() is always a keyword.) See threads.
log EXPR
log Returns the natural logarithm (base e) of EXPR. If EXPR is omitted, returns log
of $_. To get the log of another base, use basic algebra: The base-N log of a
number is equal to the natural log of that number divided by the natural log of N.
For example:
sub log10 {
my $n = shift;
return log($n)/log(10);
}
See also "exp" for the inverse operation.
lstat EXPR
lstat Does the same thing as the "stat" function (including setting the special "_"
filehandle) but stats a symbolic link instead of the file the symbolic link points
to. If symbolic links are unimplemented on your system, a normal "stat" is done.
For much more detailed information, please see the documentation for "stat".
If EXPR is omitted, stats $_.
m// The match operator. See perlop.
map BLOCK LIST
map EXPR,LIST
Evaluates the BLOCK or EXPR for each element of LIST (locally setting $_ to each
element) and returns the list value composed of the results of each such
evaluation. In scalar context, returns the total number of elements so generated.
Evaluates BLOCK or EXPR in list context, so each element of LIST may produce zero,
one, or more elements in the returned value.
@chars = map(chr, @nums);
translates a list of numbers to the corresponding characters. And
%hash = map { get_a_key_for($_) => $_ } @array;
is just a funny way to write
%hash = ();
foreach (@array) {
$hash{get_a_key_for($_)} = $_;
}
Note that $_ is an alias to the list value, so it can be used to modify the
elements of the LIST. While this is useful and supported, it can cause bizarre
results if the elements of LIST are not variables. Using a regular "foreach" loop
for this purpose would be clearer in most cases. See also "grep" for an array
composed of those items of the original list for which the BLOCK or EXPR evaluates
to true.
If $_ is lexical in the scope where the "map" appears (because it has been
declared with "my $_"), then, in addition to being locally aliased to the list
elements, $_ keeps being lexical inside the block; that is, it can't be seen from
the outside, avoiding any potential side-effects.
"{" starts both hash references and blocks, so "map { ..." could be either the
start of map BLOCK LIST or map EXPR, LIST. Because perl doesn't look ahead for the
closing "}" it has to take a guess at which its dealing with based what it finds
just after the "{". Usually it gets it right, but if it doesn't it won't realize
something is wrong until it gets to the "}" and encounters the missing (or
unexpected) comma. The syntax error will be reported close to the "}" but you'll
need to change something near the "{" such as using a unary "+" to give perl some
help:
%hash = map { "\L$_", 1 } @array # perl guesses EXPR. wrong
%hash = map { +"\L$_", 1 } @array # perl guesses BLOCK. right
%hash = map { ("\L$_", 1) } @array # this also works
%hash = map { lc($_), 1 } @array # as does this.
%hash = map +( lc($_), 1 ), @array # this is EXPR and works!
%hash = map ( lc($_), 1 ), @array # evaluates to (1, @array)
or to force an anon hash constructor use "+{":
@hashes = map +{ lc($_), 1 }, @array # EXPR, so needs , at end
and you get list of anonymous hashes each with only 1 entry.
mkdir FILENAME,MASK
mkdir FILENAME
mkdir Creates the directory specified by FILENAME, with permissions specified by MASK
(as modified by "umask"). If it succeeds it returns true, otherwise it returns
false and sets $! (errno). If omitted, MASK defaults to 0777. If omitted,
FILENAME defaults to $_.
In general, it is better to create directories with permissive MASK, and let the
user modify that with their "umask", than it is to supply a restrictive MASK and
give the user no way to be more permissive. The exceptions to this rule are when
the file or directory should be kept private (mail files, for instance). The
perlfunc(1) entry on "umask" discusses the choice of MASK in more detail.
Note that according to the POSIX 1003.1-1996 the FILENAME may have any number of
trailing slashes. Some operating and filesystems do not get this right, so Perl
automatically removes all trailing slashes to keep everyone happy.
In order to recursively create a directory structure look at the "mkpath" function
of the File::Path module.
msgctl ID,CMD,ARG
Calls the System V IPC function msgctl(2). You'll probably have to say
use IPC::SysV;
first to get the correct constant definitions. If CMD is "IPC_STAT", then ARG
must be a variable that will hold the returned "msqid_ds" structure. Returns like
"ioctl": the undefined value for error, "0 but true" for zero, or the actual
return value otherwise. See also "SysV IPC" in perlipc, "IPC::SysV", and
"IPC::Semaphore" documentation.
msgget KEY,FLAGS
Calls the System V IPC function msgget(2). Returns the message queue id, or the
undefined value if there is an error. See also "SysV IPC" in perlipc and
"IPC::SysV" and "IPC::Msg" documentation.
msgrcv ID,VAR,SIZE,TYPE,FLAGS
Calls the System V IPC function msgrcv to receive a message from message queue ID
into variable VAR with a maximum message size of SIZE. Note that when a message
is received, the message type as a native long integer will be the first thing in
VAR, followed by the actual message. This packing may be opened with "unpack("l!
a*")". Taints the variable. Returns true if successful, or false if there is an
error. See also "SysV IPC" in perlipc, "IPC::SysV", and "IPC::SysV::Msg"
documentation.
msgsnd ID,MSG,FLAGS
Calls the System V IPC function msgsnd to send the message MSG to the message
queue ID. MSG must begin with the native long integer message type, and be
followed by the length of the actual message, and finally the message itself.
This kind of packing can be achieved with "pack("l! a*", $type, $message)".
Returns true if successful, or false if there is an error. See also "IPC::SysV"
and "IPC::SysV::Msg" documentation.
my EXPR
my TYPE EXPR
my EXPR : ATTRS
my TYPE EXPR : ATTRS
A "my" declares the listed variables to be local (lexically) to the enclosing
block, file, or "eval". If more than one value is listed, the list must be placed
in parentheses.
The exact semantics and interface of TYPE and ATTRS are still evolving. TYPE is
currently bound to the use of "fields" pragma, and attributes are handled using
the "attributes" pragma, or starting from Perl 5.8.0 also via the
"Attribute::Handlers" module. See "Private Variables via my()" in perlsub for
details, and fields, attributes, and Attribute::Handlers.
next LABEL
next The "next" command is like the "continue" statement in C; it starts the next
iteration of the loop:
LINE: while (<STDIN>) {
next LINE if /^#/; # discard comments
#...
}
Note that if there were a "continue" block on the above, it would get executed
even on discarded lines. If the LABEL is omitted, the command refers to the
innermost enclosing loop.
"next" cannot be used to exit a block which returns a value such as "eval {}",
"sub {}" or "do {}", and should not be used to exit a grep() or map() operation.
Note that a block by itself is semantically identical to a loop that executes
once. Thus "next" will exit such a block early.
See also "continue" for an illustration of how "last", "next", and "redo" work.
no Module VERSION LIST
no Module VERSION
no Module LIST
no Module
no VERSION
See the "use" function, of which "no" is the opposite.
oct EXPR
oct Interprets EXPR as an octal string and returns the corresponding value. (If EXPR
happens to start off with "0x", interprets it as a hex string. If EXPR starts off
with "0b", it is interpreted as a binary string. Leading whitespace is ignored in
all three cases.) The following will handle decimal, binary, octal, and hex in
the standard Perl or C notation:
$val = oct($val) if $val =~ /^0/;
If EXPR is omitted, uses $_. To go the other way (produce a number in octal),
use sprintf() or printf():
$perms = (stat("filename"))[2] & 07777;
$oct_perms = sprintf "%lo", $perms;
The oct() function is commonly used when a string such as 644 needs to be
converted into a file mode, for example. (Although perl will automatically convert
strings into numbers as needed, this automatic conversion assumes base 10.)
open FILEHANDLE,EXPR
open FILEHANDLE,MODE,EXPR
open FILEHANDLE,MODE,EXPR,LIST
open FILEHANDLE,MODE,REFERENCE
open FILEHANDLE
Opens the file whose filename is given by EXPR, and associates it with FILEHANDLE.
(The following is a comprehensive reference to open(): for a gentler introduction
you may consider perlopentut.)
If FILEHANDLE is an undefined scalar variable (or array or hash element) the
variable is assigned a reference to a new anonymous filehandle, otherwise if
FILEHANDLE is an expression, its value is used as the name of the real filehandle
wanted. (This is considered a symbolic reference, so "use strict 'refs'" should
not be in effect.)
If EXPR is omitted, the scalar variable of the same name as the FILEHANDLE
contains the filename. (Note that lexical variables--those declared with
"my"--will not work for this purpose; so if you're using "my", specify EXPR in
your call to open.)
If three or more arguments are specified then the mode of opening and the file
name are separate. If MODE is '<' or nothing, the file is opened for input. If
MODE is '>', the file is truncated and opened for output, being created if
necessary. If MODE is '>>', the file is opened for appending, again being created
if necessary.
You can put a '+' in front of the '>' or '<' to indicate that you want both read
and write access to the file; thus '+<' is almost always preferred for read/write
updates--the '+>' mode would clobber the file first. You can't usually use either
read-write mode for updating textfiles, since they have variable length records.
See the -i switch in perlrun for a better approach. The file is created with
permissions of 0666 modified by the process' "umask" value.
These various prefixes correspond to the fopen(3) modes of 'r', 'r+', 'w', 'w+',
'a', and 'a+'.
In the 2-arguments (and 1-argument) form of the call the mode and filename should
be concatenated (in this order), possibly separated by spaces. It is possible to
omit the mode in these forms if the mode is '<'.
If the filename begins with '|', the filename is interpreted as a command to which
output is to be piped, and if the filename ends with a '|', the filename is
interpreted as a command which pipes output to us. See "Using open() for IPC" in
perlipc for more examples of this. (You are not allowed to "open" to a command
that pipes both in and out, but see IPC::Open2, IPC::Open3, and "Bidirectional
Communication with Another Process" in perlipc for alternatives.)
For three or more arguments if MODE is '|-', the filename is interpreted as a
command to which output is to be piped, and if MODE is '-|', the filename is
interpreted as a command which pipes output to us. In the 2-arguments (and
1-argument) form one should replace dash ('-') with the command. See "Using
open() for IPC" in perlipc for more examples of this. (You are not allowed to
"open" to a command that pipes both in and out, but see IPC::Open2, IPC::Open3,
and "Bidirectional Communication" in perlipc for alternatives.)
In the three-or-more argument form of pipe opens, if LIST is specified (extra
arguments after the command name) then LIST becomes arguments to the command
invoked if the platform supports it. The meaning of "open" with more than three
arguments for non-pipe modes is not yet specified. Experimental "layers" may give
extra LIST arguments meaning.
In the 2-arguments (and 1-argument) form opening '-' opens STDIN and opening '>-'
opens STDOUT.
You may use the three-argument form of open to specify IO "layers" (sometimes also
referred to as "disciplines") to be applied to the handle that affect how the
input and output are processed (see open and PerlIO for more details). For example
open(FH, "<:encoding(UTF-8)", "file")
will open the UTF-8 encoded file containing Unicode characters, see perluniintro.
Note that if layers are specified in the three-arg form then default layers stored
in ${^OPEN} (see perlvar; usually set by the open pragma or the switch -CioD) are
ignored.
Open returns nonzero upon success, the undefined value otherwise. If the "open"
involved a pipe, the return value happens to be the pid of the subprocess.
If you're running Perl on a system that distinguishes between text files and
binary files, then you should check out "binmode" for tips for dealing with this.
The key distinction between systems that need "binmode" and those that don't is
their text file formats. Systems like Unix, Mac OS, and Plan 9, which delimit
lines with a single character, and which encode that character in C as "\n", do
not need "binmode". The rest need it.
When opening a file, it's usually a bad idea to continue normal execution if the
request failed, so "open" is frequently used in connection with "die". Even if
"die" won't do what you want (say, in a CGI script, where you want to make a
nicely formatted error message (but there are modules that can help with that
problem)) you should always check the return value from opening a file. The
infrequent exception is when working with an unopened filehandle is actually what
you want to do.
As a special case the 3-arg form with a read/write mode and the third argument
being "undef":
open(TMP, "+>", undef) or die ...
opens a filehandle to an anonymous temporary file. Also using "+<" works for
symmetry, but you really should consider writing something to the temporary file
first. You will need to seek() to do the reading.
Since v5.8.0, perl has built using PerlIO by default. Unless you've changed this
(i.e. Configure -Uuseperlio), you can open file handles to "in memory" files held
in Perl scalars via:
open($fh, '>', \$variable) || ..
Though if you try to re-open "STDOUT" or "STDERR" as an "in memory" file, you have
to close it first:
close STDOUT;
open STDOUT, '>', \$variable or die "Can't open STDOUT: $!";
Examples:
$ARTICLE = 100;
open ARTICLE or die "Can't find article $ARTICLE: $!\n";
while (<ARTICLE>) {...
open(LOG, '>>/usr/spool/news/twitlog'); # (log is reserved)
# if the open fails, output is discarded
open(DBASE, '+<', 'dbase.mine') # open for update
or die "Can't open 'dbase.mine' for update: $!";
open(DBASE, '+<dbase.mine') # ditto
or die "Can't open 'dbase.mine' for update: $!";
open(ARTICLE, '-|', "caesar <$article") # decrypt article
or die "Can't start caesar: $!";
open(ARTICLE, "caesar <$article |") # ditto
or die "Can't start caesar: $!";
open(EXTRACT, "|sort >Tmp$$") # $$ is our process id
or die "Can't start sort: $!";
# in memory files
open(MEMORY,'>', \$var)
or die "Can't open memory file: $!";
print MEMORY "foo!\n"; # output will end up in $var
# process argument list of files along with any includes
foreach $file (@ARGV) {
process($file, 'fh00');
}
sub process {
my($filename, $input) = @_;
$input++; # this is a string increment
unless (open($input, $filename)) {
print STDERR "Can't open $filename: $!\n";
return;
}
local $_;
while (<$input>) { # note use of indirection
if (/^#include "(.*)"/) {
process($1, $input);
next;
}
#... # whatever
}
}
See perliol for detailed info on PerlIO.
You may also, in the Bourne shell tradition, specify an EXPR beginning with '>&',
in which case the rest of the string is interpreted as the name of a filehandle
(or file descriptor, if numeric) to be duped (as dup(2)) and opened. You may use
"&" after ">", ">>", "<", "+>", "+>>", and "+<". The mode you specify should
match the mode of the original filehandle. (Duping a filehandle does not take
into account any existing contents of IO buffers.) If you use the 3-arg form then
you can pass either a number, the name of a filehandle or the normal "reference to
a glob".
Here is a script that saves, redirects, and restores "STDOUT" and "STDERR" using
various methods:
#!/usr/bin/perl
open my $oldout, ">&STDOUT" or die "Can't dup STDOUT: $!";
open OLDERR, ">&", \*STDERR or die "Can't dup STDERR: $!";
open STDOUT, '>', "foo.out" or die "Can't redirect STDOUT: $!";
open STDERR, ">&STDOUT" or die "Can't dup STDOUT: $!";
select STDERR; $| = 1; # make unbuffered
select STDOUT; $| = 1; # make unbuffered
print STDOUT "stdout 1\n"; # this works for
print STDERR "stderr 1\n"; # subprocesses too
open STDOUT, ">&", $oldout or die "Can't dup \$oldout: $!";
open STDERR, ">&OLDERR" or die "Can't dup OLDERR: $!";
print STDOUT "stdout 2\n";
print STDERR "stderr 2\n";
If you specify '<&=X', where "X" is a file descriptor number or a filehandle, then
Perl will do an equivalent of C's "fdopen" of that file descriptor (and not call
dup(2)); this is more parsimonious of file descriptors. For example:
# open for input, reusing the fileno of $fd
open(FILEHANDLE, "<&=$fd")
or
open(FILEHANDLE, "<&=", $fd)
or
# open for append, using the fileno of OLDFH
open(FH, ">>&=", OLDFH)
or
open(FH, ">>&=OLDFH")
Being parsimonious on filehandles is also useful (besides being parsimonious) for
example when something is dependent on file descriptors, like for example locking
using flock(). If you do just "open(A, '>>&B')", the filehandle A will not have
the same file descriptor as B, and therefore flock(A) will not flock(B), and vice
versa. But with "open(A, '>>&=B')" the filehandles will share the same file
descriptor.
Note that if you are using Perls older than 5.8.0, Perl will be using the standard
C libraries' fdopen() to implement the "=" functionality. On many UNIX systems
fdopen() fails when file descriptors exceed a certain value, typically 255. For
Perls 5.8.0 and later, PerlIO is most often the default.
You can see whether Perl has been compiled with PerlIO or not by running "perl -V"
and looking for "useperlio=" line. If "useperlio" is "define", you have PerlIO,
otherwise you don't.
If you open a pipe on the command '-', i.e., either '|-' or '-|' with 2-arguments
(or 1-argument) form of open(), then there is an implicit fork done, and the
return value of open is the pid of the child within the parent process, and 0
within the child process. (Use "defined($pid)" to determine whether the open was
successful.) The filehandle behaves normally for the parent, but i/o to that
filehandle is piped from/to the STDOUT/STDIN of the child process. In the child
process the filehandle isn't opened--i/o happens from/to the new STDOUT or STDIN.
Typically this is used like the normal piped open when you want to exercise more
control over just how the pipe command gets executed, such as when you are running
setuid, and don't want to have to scan shell commands for metacharacters. The
following triples are more or less equivalent:
open(FOO, "|tr '[a-z]' '[A-Z]'");
open(FOO, '|-', "tr '[a-z]' '[A-Z]'");
open(FOO, '|-') || exec 'tr', '[a-z]', '[A-Z]';
open(FOO, '|-', "tr", '[a-z]', '[A-Z]');
open(FOO, "cat -n '$file'|");
open(FOO, '-|', "cat -n '$file'");
open(FOO, '-|') || exec 'cat', '-n', $file;
open(FOO, '-|', "cat", '-n', $file);
The last example in each block shows the pipe as "list form", which is not yet
supported on all platforms. A good rule of thumb is that if your platform has
true "fork()" (in other words, if your platform is UNIX) you can use the list
form.
See "Safe Pipe Opens" in perlipc for more examples of this.
Beginning with v5.6.0, Perl will attempt to flush all files opened for output
before any operation that may do a fork, but this may not be supported on some
platforms (see perlport). To be safe, you may need to set $| ($AUTOFLUSH in
English) or call the "autoflush()" method of "IO::Handle" on any open handles.
On systems that support a close-on-exec flag on files, the flag will be set for
the newly opened file descriptor as determined by the value of $^F. See "$^F" in
perlvar.
Closing any piped filehandle causes the parent process to wait for the child to
finish, and returns the status value in $? and "${^CHILD_ERROR_NATIVE}".
The filename passed to 2-argument (or 1-argument) form of open() will have leading
and trailing whitespace deleted, and the normal redirection characters honored.
This property, known as "magic open", can often be used to good effect. A user
could specify a filename of "rsh cat file |", or you could change certain
filenames as needed:
$filename =~ s/(.*\.gz)\s*$/gzip -dc < $1|/;
open(FH, $filename) or die "Can't open $filename: $!";
Use 3-argument form to open a file with arbitrary weird characters in it,
open(FOO, '<', $file);
otherwise it's necessary to protect any leading and trailing whitespace:
$file =~ s#^(\s)#./$1#;
open(FOO, "< $file\0");
(this may not work on some bizarre filesystems). One should conscientiously
choose between the magic and 3-arguments form of open():
open IN, $ARGV[0];
will allow the user to specify an argument of the form "rsh cat file |", but will
not work on a filename which happens to have a trailing space, while
open IN, '<', $ARGV[0];
will have exactly the opposite restrictions.
If you want a "real" C "open" (see open(2) on your system), then you should use
the "sysopen" function, which involves no such magic (but may use subtly different
filemodes than Perl open(), which is mapped to C fopen()). This is another way to
protect your filenames from interpretation. For example:
use IO::Handle;
sysopen(HANDLE, $path, O_RDWR|O_CREAT|O_EXCL)
or die "sysopen $path: $!";
$oldfh = select(HANDLE); $| = 1; select($oldfh);
print HANDLE "stuff $$\n";
seek(HANDLE, 0, 0);
print "File contains: ", <HANDLE>;
Using the constructor from the "IO::Handle" package (or one of its subclasses,
such as "IO::File" or "IO::Socket"), you can generate anonymous filehandles that
have the scope of whatever variables hold references to them, and automatically
close whenever and however you leave that scope:
use IO::File;
#...
sub read_myfile_munged {
my $ALL = shift;
my $handle = new IO::File;
open($handle, "myfile") or die "myfile: $!";
$first = <$handle>
or return (); # Automatically closed here.
mung $first or die "mung failed"; # Or here.
return $first, <$handle> if $ALL; # Or here.
$first; # Or here.
}
See "seek" for some details about mixing reading and writing.
opendir DIRHANDLE,EXPR
Opens a directory named EXPR for processing by "readdir", "telldir", "seekdir",
"rewinddir", and "closedir". Returns true if successful. DIRHANDLE may be an
expression whose value can be used as an indirect dirhandle, usually the real
dirhandle name. If DIRHANDLE is an undefined scalar variable (or array or hash
element), the variable is assigned a reference to a new anonymous dirhandle.
DIRHANDLEs have their own namespace separate from FILEHANDLEs.
ord EXPR
ord Returns the numeric (the native 8-bit encoding, like ASCII or EBCDIC, or Unicode)
value of the first character of EXPR. If EXPR is omitted, uses $_.
For the reverse, see "chr". See perlunicode for more about Unicode.
our EXPR
our TYPE EXPR
our EXPR : ATTRS
our TYPE EXPR : ATTRS
"our" associates a simple name with a package variable in the current package for
use within the current scope. When "use strict 'vars'" is in effect, "our" lets
you use declared global variables without qualifying them with package names,
within the lexical scope of the "our" declaration. In this way "our" differs from
"use vars", which is package scoped.
Unlike "my", which both allocates storage for a variable and associates a simple
name with that storage for use within the current scope, "our" associates a simple
name with a package variable in the current package, for use within the current
scope. In other words, "our" has the same scoping rules as "my", but does not
necessarily create a variable.
If more than one value is listed, the list must be placed in parentheses.
our $foo;
our($bar, $baz);
An "our" declaration declares a global variable that will be visible across its
entire lexical scope, even across package boundaries. The package in which the
variable is entered is determined at the point of the declaration, not at the
point of use. This means the following behavior holds:
package Foo;
our $bar; # declares $Foo::bar for rest of lexical scope
$bar = 20;
package Bar;
print $bar; # prints 20, as it refers to $Foo::bar
Multiple "our" declarations with the same name in the same lexical scope are
allowed if they are in different packages. If they happen to be in the same
package, Perl will emit warnings if you have asked for them, just like multiple
"my" declarations. Unlike a second "my" declaration, which will bind the name to
a fresh variable, a second "our" declaration in the same package, in the same
scope, is merely redundant.
use warnings;
package Foo;
our $bar; # declares $Foo::bar for rest of lexical scope
$bar = 20;
package Bar;
our $bar = 30; # declares $Bar::bar for rest of lexical scope
print $bar; # prints 30
our $bar; # emits warning but has no other effect
print $bar; # still prints 30
An "our" declaration may also have a list of attributes associated with it.
The exact semantics and interface of TYPE and ATTRS are still evolving. TYPE is
currently bound to the use of "fields" pragma, and attributes are handled using
the "attributes" pragma, or starting from Perl 5.8.0 also via the
"Attribute::Handlers" module. See "Private Variables via my()" in perlsub for
details, and fields, attributes, and Attribute::Handlers.
pack TEMPLATE,LIST
Takes a LIST of values and converts it into a string using the rules given by the
TEMPLATE. The resulting string is the concatenation of the converted values.
Typically, each converted value looks like its machine-level representation. For
example, on 32-bit machines an integer may be represented by a sequence of 4 bytes
that will be converted to a sequence of 4 characters.
The TEMPLATE is a sequence of characters that give the order and type of values,
as follows:
a A string with arbitrary binary data, will be null padded.
A A text (ASCII) string, will be space padded.
Z A null terminated (ASCIZ) string, will be null padded.
b A bit string (ascending bit order inside each byte, like vec()).
B A bit string (descending bit order inside each byte).
h A hex string (low nybble first).
H A hex string (high nybble first).
c A signed char (8-bit) value.
C An unsigned char (octet) value.
W An unsigned char value (can be greater than 255).
s A signed short (16-bit) value.
S An unsigned short value.
l A signed long (32-bit) value.
L An unsigned long value.
q A signed quad (64-bit) value.
Q An unsigned quad value.
(Quads are available only if your system supports 64-bit
integer values _and_ if Perl has been compiled to support those.
Causes a fatal error otherwise.)
i A signed integer value.
I A unsigned integer value.
(This 'integer' is _at_least_ 32 bits wide. Its exact
size depends on what a local C compiler calls 'int'.)
n An unsigned short (16-bit) in "network" (big-endian) order.
N An unsigned long (32-bit) in "network" (big-endian) order.
v An unsigned short (16-bit) in "VAX" (little-endian) order.
V An unsigned long (32-bit) in "VAX" (little-endian) order.
j A Perl internal signed integer value (IV).
J A Perl internal unsigned integer value (UV).
f A single-precision float in the native format.
d A double-precision float in the native format.
F A Perl internal floating point value (NV) in the native format
D A long double-precision float in the native format.
(Long doubles are available only if your system supports long
double values _and_ if Perl has been compiled to support those.
Causes a fatal error otherwise.)
p A pointer to a null-terminated string.
P A pointer to a structure (fixed-length string).
u A uuencoded string.
U A Unicode character number. Encodes to a character in character mode
and UTF-8 (or UTF-EBCDIC in EBCDIC platforms) in byte mode.
w A BER compressed integer (not an ASN.1 BER, see perlpacktut for
details). Its bytes represent an unsigned integer in base 128,
most significant digit first, with as few digits as possible. Bit
eight (the high bit) is set on each byte except the last.
x A null byte.
X Back up a byte.
@ Null fill or truncate to absolute position, counted from the
start of the innermost ()-group.
. Null fill or truncate to absolute position specified by value.
( Start of a ()-group.
One or more of the modifiers below may optionally follow some letters in the
TEMPLATE (the second column lists the letters for which the modifier is valid):
! sSlLiI Forces native (short, long, int) sizes instead
of fixed (16-/32-bit) sizes.
xX Make x and X act as alignment commands.
nNvV Treat integers as signed instead of unsigned.
@. Specify position as byte offset in the internal
representation of the packed string. Efficient but
dangerous.
> sSiIlLqQ Force big-endian byte-order on the type.
jJfFdDpP (The "big end" touches the construct.)
< sSiIlLqQ Force little-endian byte-order on the type.
jJfFdDpP (The "little end" touches the construct.)
The ">" and "<" modifiers can also be used on "()"-groups, in which case they
force a certain byte-order on all components of that group, including subgroups.
The following rules apply:
o Each letter may optionally be followed by a number giving a repeat count.
With all types except "a", "A", "Z", "b", "B", "h", "H", "@", ".", "x",
"X" and "P" the pack function will gobble up that many values from the
LIST. A "*" for the repeat count means to use however many items are
left, except for "@", "x", "X", where it is equivalent to 0, for <.> where
it means relative to string start and "u", where it is equivalent to 1 (or
45, which is the same). A numeric repeat count may optionally be enclosed
in brackets, as in "pack 'C[80]', @arr".
One can replace the numeric repeat count by a template enclosed in
brackets; then the packed length of this template in bytes is used as a
count. For example, "x[L]" skips a long (it skips the number of bytes in
a long); the template "$t X[$t] $t" unpack()s twice what $t unpacks. If
the template in brackets contains alignment commands (such as "x![d]"),
its packed length is calculated as if the start of the template has the
maximal possible alignment.
When used with "Z", "*" results in the addition of a trailing null byte
(so the packed result will be one longer than the byte "length" of the
item).
When used with "@", the repeat count represents an offset from the start
of the innermost () group.
When used with ".", the repeat count is used to determine the starting
position from where the value offset is calculated. If the repeat count is
0, it's relative to the current position. If the repeat count is "*", the
offset is relative to the start of the packed string. And if its an
integer "n" the offset is relative to the start of the n-th innermost ()
group (or the start of the string if "n" is bigger then the group level).
The repeat count for "u" is interpreted as the maximal number of bytes to
encode per line of output, with 0, 1 and 2 replaced by 45. The repeat
count should not be more than 65.
o The "a", "A", and "Z" types gobble just one value, but pack it as a string
of length count, padding with nulls or spaces as necessary. When
unpacking, "A" strips trailing whitespace and nulls, "Z" strips everything
after the first null, and "a" returns data verbatim.
If the value-to-pack is too long, it is truncated. If too long and an
explicit count is provided, "Z" packs only "$count-1" bytes, followed by a
null byte. Thus "Z" always packs a trailing null (except when the count
is 0).
o Likewise, the "b" and "B" fields pack a string that many bits long. Each
character of the input field of pack() generates 1 bit of the result.
Each result bit is based on the least-significant bit of the corresponding
input character, i.e., on "ord($char)%2". In particular, characters "0"
and "1" generate bits 0 and 1, as do characters "\0" and "\1".
Starting from the beginning of the input string of pack(), each 8-tuple of
characters is converted to 1 character of output. With format "b" the
first character of the 8-tuple determines the least-significant bit of a
character, and with format "B" it determines the most-significant bit of a
character.
If the length of the input string is not exactly divisible by 8, the
remainder is packed as if the input string were padded by null characters
at the end. Similarly, during unpack()ing the "extra" bits are ignored.
If the input string of pack() is longer than needed, extra characters are
ignored. A "*" for the repeat count of pack() means to use all the
characters of the input field. On unpack()ing the bits are converted to a
string of "0"s and "1"s.
o The "h" and "H" fields pack a string that many nybbles (4-bit groups,
representable as hexadecimal digits, 0-9a-f) long.
Each character of the input field of pack() generates 4 bits of the
result. For non-alphabetical characters the result is based on the 4
least-significant bits of the input character, i.e., on "ord($char)%16".
In particular, characters "0" and "1" generate nybbles 0 and 1, as do
bytes "\0" and "\1". For characters "a".."f" and "A".."F" the result is
compatible with the usual hexadecimal digits, so that "a" and "A" both
generate the nybble "0xa==10". The result for characters "g".."z" and
"G".."Z" is not well-defined.
Starting from the beginning of the input string of pack(), each pair of
characters is converted to 1 character of output. With format "h" the
first character of the pair determines the least-significant nybble of the
output character, and with format "H" it determines the most-significant
nybble.
If the length of the input string is not even, it behaves as if padded by
a null character at the end. Similarly, during unpack()ing the "extra"
nybbles are ignored.
If the input string of pack() is longer than needed, extra characters are
ignored. A "*" for the repeat count of pack() means to use all the
characters of the input field. On unpack()ing the nybbles are converted
to a string of hexadecimal digits.
o The "p" type packs a pointer to a null-terminated string. You are
responsible for ensuring the string is not a temporary value (which can
potentially get deallocated before you get around to using the packed
result). The "P" type packs a pointer to a structure of the size
indicated by the length. A NULL pointer is created if the corresponding
value for "p" or "P" is "undef", similarly for unpack().
If your system has a strange pointer size (i.e. a pointer is neither as
big as an int nor as big as a long), it may not be possible to pack or
unpack pointers in big- or little-endian byte order. Attempting to do so
will result in a fatal error.
o The "/" template character allows packing and unpacking of a sequence of
items where the packed structure contains a packed item count followed by
the packed items themselves.
For "pack" you write length-item"/"sequence-item and the length-item
describes how the length value is packed. The ones likely to be of most
use are integer-packing ones like "n" (for Java strings), "w" (for ASN.1
or SNMP) and "N" (for Sun XDR).
For "pack", the sequence-item may have a repeat count, in which case the
minimum of that and the number of available items is used as argument for
the length-item. If it has no repeat count or uses a '*', the number of
available items is used.
For "unpack" an internal stack of integer arguments unpacked so far is
used. You write "/"sequence-item and the repeat count is obtained by
popping off the last element from the stack. The sequence-item must not
have a repeat count.
If the sequence-item refers to a string type ("A", "a" or "Z"), the
length-item is a string length, not a number of strings. If there is an
explicit repeat count for pack, the packed string will be adjusted to that
given length.
unpack 'W/a', "\04Gurusamy"; gives ('Guru')
unpack 'a3/A A*', '007 Bond J '; gives (' Bond', 'J')
unpack 'a3 x2 /A A*', '007: Bond, J.'; gives ('Bond, J', '.')
pack 'n/a* w/a','hello,','world'; gives "\000\006hello,\005world"
pack 'a/W2', ord('a') .. ord('z'); gives '2ab'
The length-item is not returned explicitly from "unpack".
Adding a count to the length-item letter is unlikely to do anything
useful, unless that letter is "A", "a" or "Z". Packing with a length-item
of "a" or "Z" may introduce "\000" characters, which Perl does not regard
as legal in numeric strings.
o The integer types "s", "S", "l", and "L" may be followed by a "!" modifier
to signify native shorts or longs--as you can see from above for example a
bare "l" does mean exactly 32 bits, the native "long" (as seen by the
local C compiler) may be larger. This is an issue mainly in 64-bit
platforms. You can see whether using "!" makes any difference by
print length(pack("s")), " ", length(pack("s!")), "\n";
print length(pack("l")), " ", length(pack("l!")), "\n";
"i!" and "I!" also work but only because of completeness; they are
identical to "i" and "I".
The actual sizes (in bytes) of native shorts, ints, longs, and long longs
on the platform where Perl was built are also available via Config:
use Config;
print $Config{shortsize}, "\n";
print $Config{intsize}, "\n";
print $Config{longsize}, "\n";
print $Config{longlongsize}, "\n";
(The $Config{longlongsize} will be undefined if your system does not
support long longs.)
o The integer formats "s", "S", "i", "I", "l", "L", "j", and "J" are
inherently non-portable between processors and operating systems because
they obey the native byteorder and endianness. For example a 4-byte
integer 0x12345678 (305419896 decimal) would be ordered natively (arranged
in and handled by the CPU registers) into bytes as
0x12 0x34 0x56 0x78 # big-endian
0x78 0x56 0x34 0x12 # little-endian
Basically, the Intel and VAX CPUs are little-endian, while everybody else,
for example Motorola m68k/88k, PPC, Sparc, HP PA, Power, and Cray are big-
endian. Alpha and MIPS can be either: Digital/Compaq used/uses them in
little-endian mode; SGI/Cray uses them in big-endian mode.
The names `big-endian' and `little-endian' are comic references to the
classic "Gulliver's Travels" (via the paper "On Holy Wars and a Plea for
Peace" by Danny Cohen, USC/ISI IEN 137, April 1, 1980) and the egg-eating
habits of the Lilliputians.
Some systems may have even weirder byte orders such as
0x56 0x78 0x12 0x34
0x34 0x12 0x78 0x56
You can see your system's preference with
print join(" ", map { sprintf "%#02x", $_ }
unpack("W*",pack("L",0x12345678))), "\n";
The byteorder on the platform where Perl was built is also available via
Config:
use Config;
print $Config{byteorder}, "\n";
Byteorders '1234' and '12345678' are little-endian, '4321' and '87654321'
are big-endian.
If you want portable packed integers you can either use the formats "n",
"N", "v", and "V", or you can use the ">" and "<" modifiers. These
modifiers are only available as of perl 5.9.2. See also perlport.
o All integer and floating point formats as well as "p" and "P" and
"()"-groups may be followed by the ">" or "<" modifiers to force big- or
little- endian byte-order, respectively. This is especially useful, since
"n", "N", "v" and "V" don't cover signed integers, 64-bit integers and
floating point values. However, there are some things to keep in mind.
Exchanging signed integers between different platforms only works if all
platforms store them in the same format. Most platforms store signed
integers in two's complement, so usually this is not an issue.
The ">" or "<" modifiers can only be used on floating point formats on
big- or little-endian machines. Otherwise, attempting to do so will
result in a fatal error.
Forcing big- or little-endian byte-order on floating point values for data
exchange can only work if all platforms are using the same binary
representation (e.g. IEEE floating point format). Even if all platforms
are using IEEE, there may be subtle differences. Being able to use ">" or
"<" on floating point values can be very useful, but also very dangerous
if you don't know exactly what you're doing. It is definitely not a
general way to portably store floating point values.
When using ">" or "<" on an "()"-group, this will affect all types inside
the group that accept the byte-order modifiers, including all subgroups.
It will silently be ignored for all other types. You are not allowed to
override the byte-order within a group that already has a byte-order
modifier suffix.
o Real numbers (floats and doubles) are in the native machine format only;
due to the multiplicity of floating formats around, and the lack of a
standard "network" representation, no facility for interchange has been
made. This means that packed floating point data written on one machine
may not be readable on another - even if both use IEEE floating point
arithmetic (as the endian-ness of the memory representation is not part of
the IEEE spec). See also perlport.
If you know exactly what you're doing, you can use the ">" or "<"
modifiers to force big- or little-endian byte-order on floating point
values.
Note that Perl uses doubles (or long doubles, if configured) internally
for all numeric calculation, and converting from double into float and
thence back to double again will lose precision (i.e., "unpack("f",
pack("f", $foo)") will not in general equal $foo).
o Pack and unpack can operate in two modes, character mode ("C0" mode) where
the packed string is processed per character and UTF-8 mode ("U0" mode)
where the packed string is processed in its UTF-8-encoded Unicode form on
a byte by byte basis. Character mode is the default unless the format
string starts with an "U". You can switch mode at any moment with an
explicit "C0" or "U0" in the format. A mode is in effect until the next
mode switch or until the end of the ()-group in which it was entered.
o You must yourself do any alignment or padding by inserting for example
enough 'x'es while packing. There is no way to pack() and unpack() could
know where the characters are going to or coming from. Therefore "pack"
(and "unpack") handle their output and input as flat sequences of
characters.
o A ()-group is a sub-TEMPLATE enclosed in parentheses. A group may take a
repeat count, both as postfix, and for unpack() also via the "/" template
character. Within each repetition of a group, positioning with "@" starts
again at 0. Therefore, the result of
pack( '@1A((@2A)@3A)', 'a', 'b', 'c' )
is the string "\0a\0\0bc".
o "x" and "X" accept "!" modifier. In this case they act as alignment
commands: they jump forward/back to the closest position aligned at a
multiple of "count" characters. For example, to pack() or unpack() C's
"struct {char c; double d; char cc[2]}" one may need to use the template
"W x![d] d W[2]"; this assumes that doubles must be aligned on the
double's size.
For alignment commands "count" of 0 is equivalent to "count" of 1; both
result in no-ops.
o "n", "N", "v" and "V" accept the "!" modifier. In this case they will
represent signed 16-/32-bit integers in big-/little-endian order. This is
only portable if all platforms sharing the packed data use the same binary
representation for signed integers (e.g. all platforms are using two's
complement representation).
o A comment in a TEMPLATE starts with "#" and goes to the end of line.
White space may be used to separate pack codes from each other, but
modifiers and a repeat count must follow immediately.
o If TEMPLATE requires more arguments to pack() than actually given, pack()
assumes additional "" arguments. If TEMPLATE requires fewer arguments to
pack() than actually given, extra arguments are ignored.
Examples:
$foo = pack("WWWW",65,66,67,68);
# foo eq "ABCD"
$foo = pack("W4",65,66,67,68);
# same thing
$foo = pack("W4",0x24b6,0x24b7,0x24b8,0x24b9);
# same thing with Unicode circled letters.
$foo = pack("U4",0x24b6,0x24b7,0x24b8,0x24b9);
# same thing with Unicode circled letters. You don't get the UTF-8
# bytes because the U at the start of the format caused a switch to
# U0-mode, so the UTF-8 bytes get joined into characters
$foo = pack("C0U4",0x24b6,0x24b7,0x24b8,0x24b9);
# foo eq "\xe2\x92\xb6\xe2\x92\xb7\xe2\x92\xb8\xe2\x92\xb9"
# This is the UTF-8 encoding of the string in the previous example
$foo = pack("ccxxcc",65,66,67,68);
# foo eq "AB\0\0CD"
# note: the above examples featuring "W" and "c" are true
# only on ASCII and ASCII-derived systems such as ISO Latin 1
# and UTF-8. In EBCDIC the first example would be
# $foo = pack("WWWW",193,194,195,196);
$foo = pack("s2",1,2);
# "\1\0\2\0" on little-endian
# "\0\1\0\2" on big-endian
$foo = pack("a4","abcd","x","y","z");
# "abcd"
$foo = pack("aaaa","abcd","x","y","z");
# "axyz"
$foo = pack("a14","abcdefg");
# "abcdefg\0\0\0\0\0\0\0"
$foo = pack("i9pl", gmtime);
# a real struct tm (on my system anyway)
$utmp_template = "Z8 Z8 Z16 L";
$utmp = pack($utmp_template, @utmp1);
# a struct utmp (BSDish)
@utmp2 = unpack($utmp_template, $utmp);
# "@utmp1" eq "@utmp2"
sub bintodec {
unpack("N", pack("B32", substr("0" x 32 . shift, -32)));
}
$foo = pack('sx2l', 12, 34);
# short 12, two zero bytes padding, long 34
$bar = pack('s@4l', 12, 34);
# short 12, zero fill to position 4, long 34
# $foo eq $bar
$baz = pack('s.l', 12, 4, 34);
# short 12, zero fill to position 4, long 34
$foo = pack('nN', 42, 4711);
# pack big-endian 16- and 32-bit unsigned integers
$foo = pack('S>L>', 42, 4711);
# exactly the same
$foo = pack('s<l<', -42, 4711);
# pack little-endian 16- and 32-bit signed integers
$foo = pack('(sl)<', -42, 4711);
# exactly the same
The same template may generally also be used in unpack().
package NAMESPACE
package Declares the compilation unit as being in the given namespace. The scope of the
package declaration is from the declaration itself through the end of the
enclosing block, file, or eval (the same as the "my" operator). All further
unqualified dynamic identifiers will be in this namespace. A package statement
affects only dynamic variables--including those you've used "local" on--but not
lexical variables, which are created with "my". Typically it would be the first
declaration in a file to be included by the "require" or "use" operator. You can
switch into a package in more than one place; it merely influences which symbol
table is used by the compiler for the rest of that block. You can refer to
variables and filehandles in other packages by prefixing the identifier with the
package name and a double colon: $Package::Variable. If the package name is
null, the "main" package as assumed. That is, $::sail is equivalent to
$main::sail (as well as to "$main'sail", still seen in older code).
If NAMESPACE is omitted, then there is no current package, and all identifiers
must be fully qualified or lexicals. However, you are strongly advised not to
make use of this feature. Its use can cause unexpected behaviour, even crashing
some versions of Perl. It is deprecated, and will be removed from a future
release.
See "Packages" in perlmod for more information about packages, modules, and
classes. See perlsub for other scoping issues.
pipe READHANDLE,WRITEHANDLE
Opens a pair of connected pipes like the corresponding system call. Note that if
you set up a loop of piped processes, deadlock can occur unless you are very
careful. In addition, note that Perl's pipes use IO buffering, so you may need to
set $| to flush your WRITEHANDLE after each command, depending on the application.
See IPC::Open2, IPC::Open3, and "Bidirectional Communication" in perlipc for
examples of such things.
On systems that support a close-on-exec flag on files, the flag will be set for
the newly opened file descriptors as determined by the value of $^F. See "$^F" in
perlvar.
pop ARRAY
pop Pops and returns the last value of the array, shortening the array by one element.
If there are no elements in the array, returns the undefined value (although this
may happen at other times as well). If ARRAY is omitted, pops the @ARGV array in
the main program, and the @_ array in subroutines, just like "shift".
pos SCALAR
pos Returns the offset of where the last "m//g" search left off for the variable in
question ($_ is used when the variable is not specified). Note that 0 is a valid
match offset. "undef" indicates that the search position is reset (usually due to
match failure, but can also be because no match has yet been performed on the
scalar). "pos" directly accesses the location used by the regexp engine to store
the offset, so assigning to "pos" will change that offset, and so will also
influence the "\G" zero-width assertion in regular expressions. Because a failed
"m//gc" match doesn't reset the offset, the return from "pos" won't change either
in this case. See perlre and perlop.
print FILEHANDLE LIST
print LIST
print Prints a string or a list of strings. Returns true if successful. FILEHANDLE may
be a scalar variable name, in which case the variable contains the name of or a
reference to the filehandle, thus introducing one level of indirection. (NOTE: If
FILEHANDLE is a variable and the next token is a term, it may be misinterpreted as
an operator unless you interpose a "+" or put parentheses around the arguments.)
If FILEHANDLE is omitted, prints by default to standard output (or to the last
selected output channel--see "select"). If LIST is also omitted, prints $_ to the
currently selected output channel. To set the default output channel to something
other than STDOUT use the select operation. The current value of $, (if any) is
printed between each LIST item. The current value of "$\" (if any) is printed
after the entire LIST has been printed. Because print takes a LIST, anything in
the LIST is evaluated in list context, and any subroutine that you call will have
one or more of its expressions evaluated in list context. Also be careful not to
follow the print keyword with a left parenthesis unless you want the corresponding
right parenthesis to terminate the arguments to the print--interpose a "+" or put
parentheses around all the arguments.
Note that if you're storing FILEHANDLEs in an array, or if you're using any other
expression more complex than a scalar variable to retrieve it, you will have to
use a block returning the filehandle value instead:
print { $files[$i] } "stuff\n";
print { $OK ? STDOUT : STDERR } "stuff\n";
printf FILEHANDLE FORMAT, LIST
printf FORMAT, LIST
Equivalent to "print FILEHANDLE sprintf(FORMAT, LIST)", except that "$\" (the
output record separator) is not appended. The first argument of the list will be
interpreted as the "printf" format. See "sprintf" for an explanation of the format
argument. If "use locale" is in effect, and POSIX::setlocale() has been called,
the character used for the decimal separator in formatted floating point numbers
is affected by the LC_NUMERIC locale. See perllocale and POSIX.
Don't fall into the trap of using a "printf" when a simple "print" would do. The
"print" is more efficient and less error prone.
prototype FUNCTION
Returns the prototype of a function as a string (or "undef" if the function has no
prototype). FUNCTION is a reference to, or the name of, the function whose
prototype you want to retrieve.
If FUNCTION is a string starting with "CORE::", the rest is taken as a name for
Perl builtin. If the builtin is not overridable (such as "qw//") or if its
arguments cannot be adequately expressed by a prototype (such as "system"),
prototype() returns "undef", because the builtin does not really behave like a
Perl function. Otherwise, the string describing the equivalent prototype is
returned.
push ARRAY,LIST
Treats ARRAY as a stack, and pushes the values of LIST onto the end of ARRAY. The
length of ARRAY increases by the length of LIST. Has the same effect as
for $value (LIST) {
$ARRAY[++$#ARRAY] = $value;
}
but is more efficient. Returns the number of elements in the array following the
completed "push".
q/STRING/
qq/STRING/
qr/STRING/
qx/STRING/
qw/STRING/
Generalized quotes. See "Regexp Quote-Like Operators" in perlop.
quotemeta EXPR
quotemeta
Returns the value of EXPR with all non-"word" characters backslashed. (That is,
all characters not matching "/[A-Za-z_0-9]/" will be preceded by a backslash in
the returned string, regardless of any locale settings.) This is the internal
function implementing the "\Q" escape in double-quoted strings.
If EXPR is omitted, uses $_.
rand EXPR
rand Returns a random fractional number greater than or equal to 0 and less than the
value of EXPR. (EXPR should be positive.) If EXPR is omitted, the value 1 is
used. Currently EXPR with the value 0 is also special-cased as 1 - this has not
been documented before perl 5.8.0 and is subject to change in future versions of
perl. Automatically calls "srand" unless "srand" has already been called. See
also "srand".
Apply "int()" to the value returned by "rand()" if you want random integers
instead of random fractional numbers. For example,
int(rand(10))
returns a random integer between 0 and 9, inclusive.
(Note: If your rand function consistently returns numbers that are too large or
too small, then your version of Perl was probably compiled with the wrong number
of RANDBITS.)
read FILEHANDLE,SCALAR,LENGTH,OFFSET
read FILEHANDLE,SCALAR,LENGTH
Attempts to read LENGTH characters of data into variable SCALAR from the specified
FILEHANDLE. Returns the number of characters actually read, 0 at end of file, or
undef if there was an error (in the latter case $! is also set). SCALAR will be
grown or shrunk so that the last character actually read is the last character of
the scalar after the read.
An OFFSET may be specified to place the read data at some place in the string
other than the beginning. A negative OFFSET specifies placement at that many
characters counting backwards from the end of the string. A positive OFFSET
greater than the length of SCALAR results in the string being padded to the
required size with "\0" bytes before the result of the read is appended.
The call is actually implemented in terms of either Perl's or system's fread()
call. To get a true read(2) system call, see "sysread".
Note the characters: depending on the status of the filehandle, either (8-bit)
bytes or characters are read. By default all filehandles operate on bytes, but
for example if the filehandle has been opened with the ":utf8" I/O layer (see
"open", and the "open" pragma, open), the I/O will operate on UTF-8 encoded
Unicode characters, not bytes. Similarly for the ":encoding" pragma: in that case
pretty much any characters can be read.
readdir DIRHANDLE
Returns the next directory entry for a directory opened by "opendir". If used in
list context, returns all the rest of the entries in the directory. If there are
no more entries, returns an undefined value in scalar context or a null list in
list context.
If you're planning to filetest the return values out of a "readdir", you'd better
prepend the directory in question. Otherwise, because we didn't "chdir" there, it
would have been testing the wrong file.
opendir(DIR, $some_dir) || die "can't opendir $some_dir: $!";
@dots = grep { /^\./ && -f "$some_dir/$_" } readdir(DIR);
closedir DIR;
readline EXPR
readline
Reads from the filehandle whose typeglob is contained in EXPR (or from *ARGV if
EXPR is not provided). In scalar context, each call reads and returns the next
line, until end-of-file is reached, whereupon the subsequent call returns undef.
In list context, reads until end-of-file is reached and returns a list of lines.
Note that the notion of "line" used here is however you may have defined it with
$/ or $INPUT_RECORD_SEPARATOR). See "$/" in perlvar.
When $/ is set to "undef", when readline() is in scalar context (i.e. file slurp
mode), and when an empty file is read, it returns '' the first time, followed by
"undef" subsequently.
This is the internal function implementing the "<EXPR>" operator, but you can use
it directly. The "<EXPR>" operator is discussed in more detail in "I/O Operators"
in perlop.
$line = <STDIN>;
$line = readline(*STDIN); # same thing
If readline encounters an operating system error, $! will be set with the
corresponding error message. It can be helpful to check $! when you are reading
from filehandles you don't trust, such as a tty or a socket. The following
example uses the operator form of "readline", and takes the necessary steps to
ensure that "readline" was successful.
for (;;) {
undef $!;
unless (defined( $line = <> )) {
die $! if $!;
last; # reached EOF
}
# ...
}
readlink EXPR
readlink
Returns the value of a symbolic link, if symbolic links are implemented. If not,
gives a fatal error. If there is some system error, returns the undefined value
and sets $! (errno). If EXPR is omitted, uses $_.
readpipe EXPR
readpipe
EXPR is executed as a system command. The collected standard output of the
command is returned. In scalar context, it comes back as a single (potentially
multi-line) string. In list context, returns a list of lines (however you've
defined lines with $/ or $INPUT_RECORD_SEPARATOR). This is the internal function
implementing the "qx/EXPR/" operator, but you can use it directly. The "qx/EXPR/"
operator is discussed in more detail in "I/O Operators" in perlop. If EXPR is
omitted, uses $_.
recv SOCKET,SCALAR,LENGTH,FLAGS
Receives a message on a socket. Attempts to receive LENGTH characters of data
into variable SCALAR from the specified SOCKET filehandle. SCALAR will be grown
or shrunk to the length actually read. Takes the same flags as the system call of
the same name. Returns the address of the sender if SOCKET's protocol supports
this; returns an empty string otherwise. If there's an error, returns the
undefined value. This call is actually implemented in terms of recvfrom(2) system
call. See "UDP: Message Passing" in perlipc for examples.
Note the characters: depending on the status of the socket, either (8-bit) bytes
or characters are received. By default all sockets operate on bytes, but for
example if the socket has been changed using binmode() to operate with the
":encoding(utf8)" I/O layer (see the "open" pragma, open), the I/O will operate on
UTF-8 encoded Unicode characters, not bytes. Similarly for the ":encoding"
pragma: in that case pretty much any characters can be read.
redo LABEL
redo The "redo" command restarts the loop block without evaluating the conditional
again. The "continue" block, if any, is not executed. If the LABEL is omitted,
the command refers to the innermost enclosing loop. Programs that want to lie to
themselves about what was just input normally use this command:
# a simpleminded Pascal comment stripper
# (warning: assumes no { or } in strings)
LINE: while (<STDIN>) {
while (s|({.*}.*){.*}|$1 |) {}
s|{.*}| |;
if (s|{.*| |) {
$front = $_;
while (<STDIN>) {
if (/}/) { # end of comment?
s|^|$front\{|;
redo LINE;
}
}
}
print;
}
"redo" cannot be used to retry a block which returns a value such as "eval {}",
"sub {}" or "do {}", and should not be used to exit a grep() or map() operation.
Note that a block by itself is semantically identical to a loop that executes
once. Thus "redo" inside such a block will effectively turn it into a looping
construct.
See also "continue" for an illustration of how "last", "next", and "redo" work.
ref EXPR
ref Returns a non-empty string if EXPR is a reference, the empty string otherwise. If
EXPR is not specified, $_ will be used. The value returned depends on the type of
thing the reference is a reference to. Builtin types include:
SCALAR
ARRAY
HASH
CODE
REF
GLOB
LVALUE
FORMAT
IO
VSTRING
Regexp
If the referenced object has been blessed into a package, then that package name
is returned instead. You can think of "ref" as a "typeof" operator.
if (ref($r) eq "HASH") {
print "r is a reference to a hash.\n";
}
unless (ref($r)) {
print "r is not a reference at all.\n";
}
The return value "LVALUE" indicates a reference to an lvalue that is not a
variable. You get this from taking the reference of function calls like "pos()" or
"substr()". "VSTRING" is returned if the reference points to a version string.
The result "Regexp" indicates that the argument is a regular expression resulting
from "qr//".
See also perlref.
rename OLDNAME,NEWNAME
Changes the name of a file; an existing file NEWNAME will be clobbered. Returns
true for success, false otherwise.
Behavior of this function varies wildly depending on your system implementation.
For example, it will usually not work across file system boundaries, even though
the system mv command sometimes compensates for this. Other restrictions include
whether it works on directories, open files, or pre-existing files. Check
perlport and either the rename(2) manpage or equivalent system documentation for
details.
For a platform independent "move" function look at the File::Copy module.
require VERSION
require EXPR
require Demands a version of Perl specified by VERSION, or demands some semantics
specified by EXPR or by $_ if EXPR is not supplied.
VERSION may be either a numeric argument such as 5.006, which will be compared to
$], or a literal of the form v5.6.1, which will be compared to $^V (aka
$PERL_VERSION). A fatal error is produced at run time if VERSION is greater than
the version of the current Perl interpreter. Compare with "use", which can do a
similar check at compile time.
Specifying VERSION as a literal of the form v5.6.1 should generally be avoided,
because it leads to misleading error messages under earlier versions of Perl that
do not support this syntax. The equivalent numeric version should be used
instead.
require v5.6.1; # run time version check
require 5.6.1; # ditto
require 5.006_001; # ditto; preferred for backwards compatibility
Otherwise, "require" demands that a library file be included if it hasn't already
been included. The file is included via the do-FILE mechanism, which is
essentially just a variety of "eval" with the caveat that lexical variables in the
invoking script will be invisible to the included code. Has semantics similar to
the following subroutine:
sub require {
my ($filename) = @_;
if (exists $INC{$filename}) {
return 1 if $INC{$filename};
die "Compilation failed in require";
}
my ($realfilename,$result);
ITER: {
foreach $prefix (@INC) {
$realfilename = "$prefix/$filename";
if (-f $realfilename) {
$INC{$filename} = $realfilename;
$result = do $realfilename;
last ITER;
}
}
die "Can't find $filename in \@INC";
}
if ($@) {
$INC{$filename} = undef;
die $@;
} elsif (!$result) {
delete $INC{$filename};
die "$filename did not return true value";
} else {
return $result;
}
}
Note that the file will not be included twice under the same specified name.
The file must return true as the last statement to indicate successful execution
of any initialization code, so it's customary to end such a file with "1;" unless
you're sure it'll return true otherwise. But it's better just to put the "1;", in
case you add more statements.
If EXPR is a bareword, the require assumes a ".pm" extension and replaces "::"
with "/" in the filename for you, to make it easy to load standard modules. This
form of loading of modules does not risk altering your namespace.
In other words, if you try this:
require Foo::Bar; # a splendid bareword
The require function will actually look for the "Foo/Bar.pm" file in the
directories specified in the @INC array.
But if you try this:
$class = 'Foo::Bar';
require $class; # $class is not a bareword
#or
require "Foo::Bar"; # not a bareword because of the ""
The require function will look for the "Foo::Bar" file in the @INC array and will
complain about not finding "Foo::Bar" there. In this case you can do:
eval "require $class";
Now that you understand how "require" looks for files in the case of a bareword
argument, there is a little extra functionality going on behind the scenes.
Before "require" looks for a ".pm" extension, it will first look for a similar
filename with a ".pmc" extension. If this file is found, it will be loaded in
place of any file ending in a ".pm" extension.
You can also insert hooks into the import facility, by putting directly Perl code
into the @INC array. There are three forms of hooks: subroutine references, array
references and blessed objects.
Subroutine references are the simplest case. When the inclusion system walks
through @INC and encounters a subroutine, this subroutine gets called with two
parameters, the first being a reference to itself, and the second the name of the
file to be included (e.g. "Foo/Bar.pm"). The subroutine should return nothing, or
a list of up to three values in the following order:
1. A filehandle, from which the file will be read.
2. A reference to a subroutine. If there is no filehandle (previous item), then
this subroutine is expected to generate one line of source code per call,
writing the line into $_ and returning 1, then returning 0 at "end of file".
If there is a filehandle, then the subroutine will be called to act a simple
source filter, with the line as read in $_. Again, return 1 for each valid
line, and 0 after all lines have been returned.
3. Optional state for the subroutine. The state is passed in as $_[1]. A
reference to the subroutine itself is passed in as $_[0].
If an empty list, "undef", or nothing that matches the first 3 values above is
returned then "require" will look at the remaining elements of @INC. Note that
this file handle must be a real file handle (strictly a typeglob, or reference to
a typeglob, blessed or unblessed) - tied file handles will be ignored and return
value processing will stop there.
If the hook is an array reference, its first element must be a subroutine
reference. This subroutine is called as above, but the first parameter is the
array reference. This enables to pass indirectly some arguments to the
subroutine.
In other words, you can write:
push @INC, \&my_sub;
sub my_sub {
my ($coderef, $filename) = @_; # $coderef is \&my_sub
...
}
or:
push @INC, [ \&my_sub, $x, $y, ... ];
sub my_sub {
my ($arrayref, $filename) = @_;
# Retrieve $x, $y, ...
my @parameters = @$arrayref[1..$#$arrayref];
...
}
If the hook is an object, it must provide an INC method that will be called as
above, the first parameter being the object itself. (Note that you must fully
qualify the sub's name, as unqualified "INC" is always forced into package
"main".) Here is a typical code layout:
# In Foo.pm
package Foo;
sub new { ... }
sub Foo::INC {
my ($self, $filename) = @_;
...
}
# In the main program
push @INC, new Foo(...);
Note that these hooks are also permitted to set the %INC entry corresponding to
the files they have loaded. See "%INC" in perlvar.
For a yet-more-powerful import facility, see "use" and perlmod.
reset EXPR
reset Generally used in a "continue" block at the end of a loop to clear variables and
reset "??" searches so that they work again. The expression is interpreted as a
list of single characters (hyphens allowed for ranges). All variables and arrays
beginning with one of those letters are reset to their pristine state. If the
expression is omitted, one-match searches ("?pattern?") are reset to match again.
Resets only variables or searches in the current package. Always returns 1.
Examples:
reset 'X'; # reset all X variables
reset 'a-z'; # reset lower case variables
reset; # just reset ?one-time? searches
Resetting "A-Z" is not recommended because you'll wipe out your @ARGV and @INC
arrays and your %ENV hash. Resets only package variables--lexical variables are
unaffected, but they clean themselves up on scope exit anyway, so you'll probably
want to use them instead. See "my".
return EXPR
return Returns from a subroutine, "eval", or "do FILE" with the value given in EXPR.
Evaluation of EXPR may be in list, scalar, or void context, depending on how the
return value will be used, and the context may vary from one execution to the next
(see "wantarray"). If no EXPR is given, returns an empty list in list context,
the undefined value in scalar context, and (of course) nothing at all in a void
context.
(Note that in the absence of an explicit "return", a subroutine, eval, or do FILE
will automatically return the value of the last expression evaluated.)
reverse LIST
In list context, returns a list value consisting of the elements of LIST in the
opposite order. In scalar context, concatenates the elements of LIST and returns
a string value with all characters in the opposite order.
print reverse <>; # line tac, last line first
undef $/; # for efficiency of <>
print scalar reverse <>; # character tac, last line tsrif
Used without arguments in scalar context, reverse() reverses $_.
This operator is also handy for inverting a hash, although there are some caveats.
If a value is duplicated in the original hash, only one of those can be
represented as a key in the inverted hash. Also, this has to unwind one hash and
build a whole new one, which may take some time on a large hash, such as from a
DBM file.
%by_name = reverse %by_address; # Invert the hash
rewinddir DIRHANDLE
Sets the current position to the beginning of the directory for the "readdir"
routine on DIRHANDLE.
rindex STR,SUBSTR,POSITION
rindex STR,SUBSTR
Works just like index() except that it returns the position of the last occurrence
of SUBSTR in STR. If POSITION is specified, returns the last occurrence beginning
at or before that position.
rmdir FILENAME
rmdir Deletes the directory specified by FILENAME if that directory is empty. If it
succeeds it returns true, otherwise it returns false and sets $! (errno). If
FILENAME is omitted, uses $_.
To remove a directory tree recursively ("rm -rf" on unix) look at the "rmtree"
function of the File::Path module.
s/// The substitution operator. See perlop.
say FILEHANDLE LIST
say LIST
say Just like "print", but implicitly appends a newline. "say LIST" is simply an
abbreviation for "{ local $\ = "\n"; print LIST }".
This keyword is only available when the "say" feature is enabled: see feature.
scalar EXPR
Forces EXPR to be interpreted in scalar context and returns the value of EXPR.
@counts = ( scalar @a, scalar @b, scalar @c );
There is no equivalent operator to force an expression to be interpolated in list
context because in practice, this is never needed. If you really wanted to do so,
however, you could use the construction "@{[ (some expression) ]}", but usually a
simple "(some expression)" suffices.
Because "scalar" is unary operator, if you accidentally use for EXPR a
parenthesized list, this behaves as a scalar comma expression, evaluating all but
the last element in void context and returning the final element evaluated in
scalar context. This is seldom what you want.
The following single statement:
print uc(scalar(&foo,$bar)),$baz;
is the moral equivalent of these two:
&foo;
print(uc($bar),$baz);
See perlop for more details on unary operators and the comma operator.
seek FILEHANDLE,POSITION,WHENCE
Sets FILEHANDLE's position, just like the "fseek" call of "stdio". FILEHANDLE may
be an expression whose value gives the name of the filehandle. The values for
WHENCE are 0 to set the new position in bytes to POSITION, 1 to set it to the
current position plus POSITION, and 2 to set it to EOF plus POSITION (typically
negative). For WHENCE you may use the constants "SEEK_SET", "SEEK_CUR", and
"SEEK_END" (start of the file, current position, end of the file) from the Fcntl
module. Returns 1 upon success, 0 otherwise.
Note the in bytes: even if the filehandle has been set to operate on characters
(for example by using the ":encoding(utf8)" open layer), tell() will return byte
offsets, not character offsets (because implementing that would render seek() and
tell() rather slow).
If you want to position file for "sysread" or "syswrite", don't use
"seek"--buffering makes its effect on the file's system position unpredictable and
non-portable. Use "sysseek" instead.
Due to the rules and rigors of ANSI C, on some systems you have to do a seek
whenever you switch between reading and writing. Amongst other things, this may
have the effect of calling stdio's clearerr(3). A WHENCE of 1 ("SEEK_CUR") is
useful for not moving the file position:
seek(TEST,0,1);
This is also useful for applications emulating "tail -f". Once you hit EOF on
your read, and then sleep for a while, you might have to stick in a seek() to
reset things. The "seek" doesn't change the current position, but it does clear
the end-of-file condition on the handle, so that the next "<FILE>" makes Perl try
again to read something. We hope.
If that doesn't work (some IO implementations are particularly cantankerous), then
you may need something more like this:
for (;;) {
for ($curpos = tell(FILE); $_ = <FILE>;
$curpos = tell(FILE)) {
# search for some stuff and put it into files
}
sleep($for_a_while);
seek(FILE, $curpos, 0);
}
seekdir DIRHANDLE,POS
Sets the current position for the "readdir" routine on DIRHANDLE. POS must be a
value returned by "telldir". "seekdir" also has the same caveats about possible
directory compaction as the corresponding system library routine.
select FILEHANDLE
select Returns the currently selected filehandle. If FILEHANDLE is supplied, sets the
new current default filehandle for output. This has two effects: first, a "write"
or a "print" without a filehandle will default to this FILEHANDLE. Second,
references to variables related to output will refer to this output channel. For
example, if you have to set the top of form format for more than one output
channel, you might do the following:
select(REPORT1);
$^ = 'report1_top';
select(REPORT2);
$^ = 'report2_top';
FILEHANDLE may be an expression whose value gives the name of the actual
filehandle. Thus:
$oldfh = select(STDERR); $| = 1; select($oldfh);
Some programmers may prefer to think of filehandles as objects with methods,
preferring to write the last example as:
use IO::Handle;
STDERR->autoflush(1);
select RBITS,WBITS,EBITS,TIMEOUT
This calls the select(2) system call with the bit masks specified, which can be
constructed using "fileno" and "vec", along these lines:
$rin = $win = $ein = '';
vec($rin,fileno(STDIN),1) = 1;
vec($win,fileno(STDOUT),1) = 1;
$ein = $rin | $win;
If you want to select on many filehandles you might wish to write a subroutine:
sub fhbits {
my(@fhlist) = split(' ',$_[0]);
my($bits);
for (@fhlist) {
vec($bits,fileno($_),1) = 1;
}
$bits;
}
$rin = fhbits('STDIN TTY SOCK');
The usual idiom is:
($nfound,$timeleft) =
select($rout=$rin, $wout=$win, $eout=$ein, $timeout);
or to block until something becomes ready just do this
$nfound = select($rout=$rin, $wout=$win, $eout=$ein, undef);
Most systems do not bother to return anything useful in $timeleft, so calling
select() in scalar context just returns $nfound.
Any of the bit masks can also be undef. The timeout, if specified, is in seconds,
which may be fractional. Note: not all implementations are capable of returning
the $timeleft. If not, they always return $timeleft equal to the supplied
$timeout.
You can effect a sleep of 250 milliseconds this way:
select(undef, undef, undef, 0.25);
Note that whether "select" gets restarted after signals (say, SIGALRM) is
implementation-dependent. See also perlport for notes on the portability of
"select".
On error, "select" behaves like the select(2) system call : it returns -1 and sets
$!.
Note: on some Unixes, the select(2) system call may report a socket file
descriptor as "ready for reading", when actually no data is available, thus a
subsequent read blocks. It can be avoided using always the O_NONBLOCK flag on the
socket. See select(2) and fcntl(2) for further details.
WARNING: One should not attempt to mix buffered I/O (like "read" or <FH>) with
"select", except as permitted by POSIX, and even then only on POSIX systems. You
have to use "sysread" instead.
semctl ID,SEMNUM,CMD,ARG
Calls the System V IPC function "semctl". You'll probably have to say
use IPC::SysV;
first to get the correct constant definitions. If CMD is IPC_STAT or GETALL, then
ARG must be a variable that will hold the returned semid_ds structure or semaphore
value array. Returns like "ioctl": the undefined value for error, ""0 but true""
for zero, or the actual return value otherwise. The ARG must consist of a vector
of native short integers, which may be created with "pack("s!",(0)x$nsem)". See
also "SysV IPC" in perlipc, "IPC::SysV", "IPC::Semaphore" documentation.
semget KEY,NSEMS,FLAGS
Calls the System V IPC function semget. Returns the semaphore id, or the
undefined value if there is an error. See also "SysV IPC" in perlipc,
"IPC::SysV", "IPC::SysV::Semaphore" documentation.
semop KEY,OPSTRING
Calls the System V IPC function semop to perform semaphore operations such as
signalling and waiting. OPSTRING must be a packed array of semop structures.
Each semop structure can be generated with "pack("s!3", $semnum, $semop,
$semflag)". The length of OPSTRING implies the number of semaphore operations.
Returns true if successful, or false if there is an error. As an example, the
following code waits on semaphore $semnum of semaphore id $semid:
$semop = pack("s!3", $semnum, -1, 0);
die "Semaphore trouble: $!\n" unless semop($semid, $semop);
To signal the semaphore, replace "-1" with 1. See also "SysV IPC" in perlipc,
"IPC::SysV", and "IPC::SysV::Semaphore" documentation.
send SOCKET,MSG,FLAGS,TO
send SOCKET,MSG,FLAGS
Sends a message on a socket. Attempts to send the scalar MSG to the SOCKET
filehandle. Takes the same flags as the system call of the same name. On
unconnected sockets you must specify a destination to send TO, in which case it
does a C "sendto". Returns the number of characters sent, or the undefined value
if there is an error. The C system call sendmsg(2) is currently unimplemented.
See "UDP: Message Passing" in perlipc for examples.
Note the characters: depending on the status of the socket, either (8-bit) bytes
or characters are sent. By default all sockets operate on bytes, but for example
if the socket has been changed using binmode() to operate with the
":encoding(utf8)" I/O layer (see "open", or the "open" pragma, open), the I/O will
operate on UTF-8 encoded Unicode characters, not bytes. Similarly for the
":encoding" pragma: in that case pretty much any characters can be sent.
setpgrp PID,PGRP
Sets the current process group for the specified PID, 0 for the current process.
Will produce a fatal error if used on a machine that doesn't implement POSIX
setpgid(2) or BSD setpgrp(2). If the arguments are omitted, it defaults to "0,0".
Note that the BSD 4.2 version of "setpgrp" does not accept any arguments, so only
"setpgrp(0,0)" is portable. See also "POSIX::setsid()".
setpriority WHICH,WHO,PRIORITY
Sets the current priority for a process, a process group, or a user. (See
setpriority(2).) Will produce a fatal error if used on a machine that doesn't
implement setpriority(2).
setsockopt SOCKET,LEVEL,OPTNAME,OPTVAL
Sets the socket option requested. Returns undefined if there is an error. Use
integer constants provided by the "Socket" module for LEVEL and OPNAME. Values
for LEVEL can also be obtained from getprotobyname. OPTVAL might either be a
packed string or an integer. An integer OPTVAL is shorthand for pack("i",
OPTVAL).
An example disabling the Nagle's algorithm for a socket:
use Socket qw(IPPROTO_TCP TCP_NODELAY);
setsockopt($socket, IPPROTO_TCP, TCP_NODELAY, 1);
shift ARRAY
shift Shifts the first value of the array off and returns it, shortening the array by 1
and moving everything down. If there are no elements in the array, returns the
undefined value. If ARRAY is omitted, shifts the @_ array within the lexical
scope of subroutines and formats, and the @ARGV array outside of a subroutine and
also within the lexical scopes established by the "eval STRING", "BEGIN {}", "INIT
{}", "CHECK {}", "UNITCHECK {}" and "END {}" constructs.
See also "unshift", "push", and "pop". "shift" and "unshift" do the same thing to
the left end of an array that "pop" and "push" do to the right end.
shmctl ID,CMD,ARG
Calls the System V IPC function shmctl. You'll probably have to say
use IPC::SysV;
first to get the correct constant definitions. If CMD is "IPC_STAT", then ARG
must be a variable that will hold the returned "shmid_ds" structure. Returns like
ioctl: the undefined value for error, "0 but true" for zero, or the actual return
value otherwise. See also "SysV IPC" in perlipc and "IPC::SysV" documentation.
shmget KEY,SIZE,FLAGS
Calls the System V IPC function shmget. Returns the shared memory segment id, or
the undefined value if there is an error. See also "SysV IPC" in perlipc and
"IPC::SysV" documentation.
shmread ID,VAR,POS,SIZE
shmwrite ID,STRING,POS,SIZE
Reads or writes the System V shared memory segment ID starting at position POS for
size SIZE by attaching to it, copying in/out, and detaching from it. When
reading, VAR must be a variable that will hold the data read. When writing, if
STRING is too long, only SIZE bytes are used; if STRING is too short, nulls are
written to fill out SIZE bytes. Return true if successful, or false if there is
an error. shmread() taints the variable. See also "SysV IPC" in perlipc,
"IPC::SysV" documentation, and the "IPC::Shareable" module from CPAN.
shutdown SOCKET,HOW
Shuts down a socket connection in the manner indicated by HOW, which has the same
interpretation as in the system call of the same name.
shutdown(SOCKET, 0); # I/we have stopped reading data
shutdown(SOCKET, 1); # I/we have stopped writing data
shutdown(SOCKET, 2); # I/we have stopped using this socket
This is useful with sockets when you want to tell the other side you're done
writing but not done reading, or vice versa. It's also a more insistent form of
close because it also disables the file descriptor in any forked copies in other
processes.
sin EXPR
sin Returns the sine of EXPR (expressed in radians). If EXPR is omitted, returns sine
of $_.
For the inverse sine operation, you may use the "Math::Trig::asin" function, or
use this relation:
sub asin { atan2($_[0], sqrt(1 - $_[0] * $_[0])) }
sleep EXPR
sleep Causes the script to sleep for EXPR seconds, or forever if no EXPR. May be
interrupted if the process receives a signal such as "SIGALRM". Returns the
number of seconds actually slept. You probably cannot mix "alarm" and "sleep"
calls, because "sleep" is often implemented using "alarm".
On some older systems, it may sleep up to a full second less than what you
requested, depending on how it counts seconds. Most modern systems always sleep
the full amount. They may appear to sleep longer than that, however, because your
process might not be scheduled right away in a busy multitasking system.
For delays of finer granularity than one second, the Time::HiRes module (from
CPAN, and starting from Perl 5.8 part of the standard distribution) provides
usleep(). You may also use Perl's four-argument version of select() leaving the
first three arguments undefined, or you might be able to use the "syscall"
interface to access setitimer(2) if your system supports it. See perlfaq8 for
details.
See also the POSIX module's "pause" function.
socket SOCKET,DOMAIN,TYPE,PROTOCOL
Opens a socket of the specified kind and attaches it to filehandle SOCKET.
DOMAIN, TYPE, and PROTOCOL are specified the same as for the system call of the
same name. You should "use Socket" first to get the proper definitions imported.
See the examples in "Sockets: Client/Server Communication" in perlipc.
On systems that support a close-on-exec flag on files, the flag will be set for
the newly opened file descriptor, as determined by the value of $^F. See "$^F" in
perlvar.
socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL
Creates an unnamed pair of sockets in the specified domain, of the specified type.
DOMAIN, TYPE, and PROTOCOL are specified the same as for the system call of the
same name. If unimplemented, yields a fatal error. Returns true if successful.
On systems that support a close-on-exec flag on files, the flag will be set for
the newly opened file descriptors, as determined by the value of $^F. See "$^F"
in perlvar.
Some systems defined "pipe" in terms of "socketpair", in which a call to
"pipe(Rdr, Wtr)" is essentially:
use Socket;
socketpair(Rdr, Wtr, AF_UNIX, SOCK_STREAM, PF_UNSPEC);
shutdown(Rdr, 1); # no more writing for reader
shutdown(Wtr, 0); # no more reading for writer
See perlipc for an example of socketpair use. Perl 5.8 and later will emulate
socketpair using IP sockets to localhost if your system implements sockets but not
socketpair.
sort SUBNAME LIST
sort BLOCK LIST
sort LIST
In list context, this sorts the LIST and returns the sorted list value. In scalar
context, the behaviour of "sort()" is undefined.
If SUBNAME or BLOCK is omitted, "sort"s in standard string comparison order. If
SUBNAME is specified, it gives the name of a subroutine that returns an integer
less than, equal to, or greater than 0, depending on how the elements of the list
are to be ordered. (The "<=>" and "cmp" operators are extremely useful in such
routines.) SUBNAME may be a scalar variable name (unsubscripted), in which case
the value provides the name of (or a reference to) the actual subroutine to use.
In place of a SUBNAME, you can provide a BLOCK as an anonymous, in-line sort
subroutine.
If the subroutine's prototype is "($$)", the elements to be compared are passed by
reference in @_, as for a normal subroutine. This is slower than unprototyped
subroutines, where the elements to be compared are passed into the subroutine as
the package global variables $a and $b (see example below). Note that in the
latter case, it is usually counter-productive to declare $a and $b as lexicals.
The values to be compared are always passed by reference and should not be
modified.
You also cannot exit out of the sort block or subroutine using any of the loop
control operators described in perlsyn or with "goto".
When "use locale" is in effect, "sort LIST" sorts LIST according to the current
collation locale. See perllocale.
sort() returns aliases into the original list, much as a for loop's index variable
aliases the list elements. That is, modifying an element of a list returned by
sort() (for example, in a "foreach", "map" or "grep") actually modifies the
element in the original list. This is usually something to be avoided when
writing clear code.
Perl 5.6 and earlier used a quicksort algorithm to implement sort. That algorithm
was not stable, and could go quadratic. (A stable sort preserves the input order
of elements that compare equal. Although quicksort's run time is O(NlogN) when
averaged over all arrays of length N, the time can be O(N**2), quadratic behavior,
for some inputs.) In 5.7, the quicksort implementation was replaced with a stable
mergesort algorithm whose worst-case behavior is O(NlogN). But benchmarks
indicated that for some inputs, on some platforms, the original quicksort was
faster. 5.8 has a sort pragma for limited control of the sort. Its rather blunt
control of the underlying algorithm may not persist into future Perls, but the
ability to characterize the input or output in implementation independent ways
quite probably will. See sort.
Examples:
# sort lexically
@articles = sort @files;
# same thing, but with explicit sort routine
@articles = sort {$a cmp $b} @files;
# now case-insensitively
@articles = sort {uc($a) cmp uc($b)} @files;
# same thing in reversed order
@articles = sort {$b cmp $a} @files;
# sort numerically ascending
@articles = sort {$a <=> $b} @files;
# sort numerically descending
@articles = sort {$b <=> $a} @files;
# this sorts the %age hash by value instead of key
# using an in-line function
@eldest = sort { $age{$b} <=> $age{$a} } keys %age;
# sort using explicit subroutine name
sub byage {
$age{$a} <=> $age{$b}; # presuming numeric
}
@sortedclass = sort byage @class;
sub backwards { $b cmp $a }
@harry = qw(dog cat x Cain Abel);
@george = qw(gone chased yz Punished Axed);
print sort @harry;
# prints AbelCaincatdogx
print sort backwards @harry;
# prints xdogcatCainAbel
print sort @george, 'to', @harry;
# prints AbelAxedCainPunishedcatchaseddoggonetoxyz
# inefficiently sort by descending numeric compare using
# the first integer after the first = sign, or the
# whole record case-insensitively otherwise
@new = sort {
($b =~ /=(\d+)/)[0] <=> ($a =~ /=(\d+)/)[0]
||
uc($a) cmp uc($b)
} @old;
# same thing, but much more efficiently;
# we'll build auxiliary indices instead
# for speed
@nums = @caps = ();
for (@old) {
push @nums, /=(\d+)/;
push @caps, uc($_);
}
@new = @old[ sort {
$nums[$b] <=> $nums[$a]
||
$caps[$a] cmp $caps[$b]
} 0..$#old
];
# same thing, but without any temps
@new = map { $_->[0] }
sort { $b->[1] <=> $a->[1]
||
$a->[2] cmp $b->[2]
} map { [$_, /=(\d+)/, uc($_)] } @old;
# using a prototype allows you to use any comparison subroutine
# as a sort subroutine (including other package's subroutines)
package other;
sub backwards ($$) { $_[1] cmp $_[0]; } # $a and $b are not set here
package main;
@new = sort other::backwards @old;
# guarantee stability, regardless of algorithm
use sort 'stable';
@new = sort { substr($a, 3, 5) cmp substr($b, 3, 5) } @old;
# force use of mergesort (not portable outside Perl 5.8)
use sort '_mergesort'; # note discouraging _
@new = sort { substr($a, 3, 5) cmp substr($b, 3, 5) } @old;
If you're using strict, you must not declare $a and $b as lexicals. They are
package globals. That means if you're in the "main" package and type
@articles = sort {$b <=> $a} @files;
then $a and $b are $main::a and $main::b (or $::a and $::b), but if you're in the
"FooPack" package, it's the same as typing
@articles = sort {$FooPack::b <=> $FooPack::a} @files;
The comparison function is required to behave. If it returns inconsistent results
(sometimes saying $x[1] is less than $x[2] and sometimes saying the opposite, for
example) the results are not well-defined.
Because "<=>" returns "undef" when either operand is "NaN" (not-a-number), and
because "sort" will trigger a fatal error unless the result of a comparison is
defined, when sorting with a comparison function like "$a <=> $b", be careful
about lists that might contain a "NaN". The following example takes advantage of
the fact that "NaN != NaN" to eliminate any "NaN"s from the input.
@result = sort { $a <=> $b } grep { $_ == $_ } @input;
splice ARRAY,OFFSET,LENGTH,LIST
splice ARRAY,OFFSET,LENGTH
splice ARRAY,OFFSET
splice ARRAY
Removes the elements designated by OFFSET and LENGTH from an array, and replaces
them with the elements of LIST, if any. In list context, returns the elements
removed from the array. In scalar context, returns the last element removed, or
"undef" if no elements are removed. The array grows or shrinks as necessary. If
OFFSET is negative then it starts that far from the end of the array. If LENGTH
is omitted, removes everything from OFFSET onward. If LENGTH is negative, removes
the elements from OFFSET onward except for -LENGTH elements at the end of the
array. If both OFFSET and LENGTH are omitted, removes everything. If OFFSET is
past the end of the array, perl issues a warning, and splices at the end of the
array.
The following equivalences hold (assuming "$[ == 0 and $#a >= $i" )
push(@a,$x,$y) splice(@a,@a,0,$x,$y)
pop(@a) splice(@a,-1)
shift(@a) splice(@a,0,1)
unshift(@a,$x,$y) splice(@a,0,0,$x,$y)
$a[$i] = $y splice(@a,$i,1,$y)
Example, assuming array lengths are passed before arrays:
sub aeq { # compare two list values
my(@a) = splice(@_,0,shift);
my(@b) = splice(@_,0,shift);
return 0 unless @a == @b; # same len?
while (@a) {
return 0 if pop(@a) ne pop(@b);
}
return 1;
}
if (&aeq($len,@foo[1..$len],0+@bar,@bar)) { ... }
split /PATTERN/,EXPR,LIMIT
split /PATTERN/,EXPR
split /PATTERN/
split Splits the string EXPR into a list of strings and returns that list. By default,
empty leading fields are preserved, and empty trailing ones are deleted. (If all
fields are empty, they are considered to be trailing.)
In scalar context, returns the number of fields found and splits into the @_
array. Use of split in scalar context is deprecated, however, because it clobbers
your subroutine arguments.
If EXPR is omitted, splits the $_ string. If PATTERN is also omitted, splits on
whitespace (after skipping any leading whitespace). Anything matching PATTERN is
taken to be a delimiter separating the fields. (Note that the delimiter may be
longer than one character.)
If LIMIT is specified and positive, it represents the maximum number of fields the
EXPR will be split into, though the actual number of fields returned depends on
the number of times PATTERN matches within EXPR. If LIMIT is unspecified or zero,
trailing null fields are stripped (which potential users of "pop" would do well to
remember). If LIMIT is negative, it is treated as if an arbitrarily large LIMIT
had been specified. Note that splitting an EXPR that evaluates to the empty
string always returns the empty list, regardless of the LIMIT specified.
A pattern matching the null string (not to be confused with a null pattern "//",
which is just one member of the set of patterns matching a null string) will split
the value of EXPR into separate characters at each point it matches that way. For
example:
print join(':', split(/ */, 'hi there'));
produces the output 'h:i:t:h:e:r:e'.
As a special case for "split", using the empty pattern "//" specifically matches
only the null string, and is not be confused with the regular use of "//" to mean
"the last successful pattern match". So, for "split", the following:
print join(':', split(//, 'hi there'));
produces the output 'h:i: :t:h:e:r:e'.
Empty leading fields are produced when there are positive-width matches at the
beginning of the string; a zero-width match at the beginning of the string does
not produce an empty field. For example:
print join(':', split(/(?=\w)/, 'hi there!'));
produces the output 'h:i :t:h:e:r:e!'. Empty trailing fields, on the other hand,
are produced when there is a match at the end of the string (and when LIMIT is
given and is not 0), regardless of the length of the match. For example:
print join(':', split(//, 'hi there!', -1));
print join(':', split(/\W/, 'hi there!', -1));
produce the output 'h:i: :t:h:e:r:e:!:' and 'hi:there:', respectively, both with
an empty trailing field.
The LIMIT parameter can be used to split a line partially
($login, $passwd, $remainder) = split(/:/, $_, 3);
When assigning to a list, if LIMIT is omitted, or zero, Perl supplies a LIMIT one
larger than the number of variables in the list, to avoid unnecessary work. For
the list above LIMIT would have been 4 by default. In time critical applications
it behooves you not to split into more fields than you really need.
If the PATTERN contains parentheses, additional list elements are created from
each matching substring in the delimiter.
split(/([,-])/, "1-10,20", 3);
produces the list value
(1, '-', 10, ',', 20)
If you had the entire header of a normal Unix email message in $header, you could
split it up into fields and their values this way:
$header =~ s/\n\s+/ /g; # fix continuation lines
%hdrs = (UNIX_FROM => split /^(\S*?):\s*/m, $header);
The pattern "/PATTERN/" may be replaced with an expression to specify patterns
that vary at runtime. (To do runtime compilation only once, use "/$variable/o".)
As a special case, specifying a PATTERN of space (' ') will split on white space
just as "split" with no arguments does. Thus, "split(' ')" can be used to emulate
awk's default behavior, whereas "split(/ /)" will give you as many null initial
fields as there are leading spaces. A "split" on "/\s+/" is like a "split(' ')"
except that any leading whitespace produces a null first field. A "split" with no
arguments really does a "split(' ', $_)" internally.
A PATTERN of "/^/" is treated as if it were "/^/m", since it isn't much use
otherwise.
Example:
open(PASSWD, '/etc/passwd');
while (<PASSWD>) {
chomp;
($login, $passwd, $uid, $gid,
$gcos, $home, $shell) = split(/:/);
#...
}
As with regular pattern matching, any capturing parentheses that are not matched
in a "split()" will be set to "undef" when returned:
@fields = split /(A)|B/, "1A2B3";
# @fields is (1, 'A', 2, undef, 3)
sprintf FORMAT, LIST
Returns a string formatted by the usual "printf" conventions of the C library
function "sprintf". See below for more details and see sprintf(3) or printf(3) on
your system for an explanation of the general principles.
For example:
# Format number with up to 8 leading zeroes
$result = sprintf("%08d", $number);
# Round number to 3 digits after decimal point
$rounded = sprintf("%.3f", $number);
Perl does its own "sprintf" formatting--it emulates the C function "sprintf", but
it doesn't use it (except for floating-point numbers, and even then only the
standard modifiers are allowed). As a result, any non-standard extensions in your
local "sprintf" are not available from Perl.
Unlike "printf", "sprintf" does not do what you probably mean when you pass it an
array as your first argument. The array is given scalar context, and instead of
using the 0th element of the array as the format, Perl will use the count of
elements in the array as the format, which is almost never useful.
Perl's "sprintf" permits the following universally-known conversions:
%% a percent sign
%c a character with the given number
%s a string
%d a signed integer, in decimal
%u an unsigned integer, in decimal
%o an unsigned integer, in octal
%x an unsigned integer, in hexadecimal
%e a floating-point number, in scientific notation
%f a floating-point number, in fixed decimal notation
%g a floating-point number, in %e or %f notation
In addition, Perl permits the following widely-supported conversions:
%X like %x, but using upper-case letters
%E like %e, but using an upper-case "E"
%G like %g, but with an upper-case "E" (if applicable)
%b an unsigned integer, in binary
%B like %b, but using an upper-case "B" with the # flag
%p a pointer (outputs the Perl value's address in hexadecimal)
%n special: *stores* the number of characters output so far
into the next variable in the parameter list
Finally, for backward (and we do mean "backward") compatibility, Perl permits
these unnecessary but widely-supported conversions:
%i a synonym for %d
%D a synonym for %ld
%U a synonym for %lu
%O a synonym for %lo
%F a synonym for %f
Note that the number of exponent digits in the scientific notation produced by %e,
%E, %g and %G for numbers with the modulus of the exponent less than 100 is
system-dependent: it may be three or less (zero-padded as necessary). In other
words, 1.23 times ten to the 99th may be either "1.23e99" or "1.23e099".
Between the "%" and the format letter, you may specify a number of additional
attributes controlling the interpretation of the format. In order, these are:
format parameter index
An explicit format parameter index, such as "2$". By default sprintf will
format the next unused argument in the list, but this allows you to take the
arguments out of order, e.g.:
printf '%2$d %1$d', 12, 34; # prints "34 12"
printf '%3$d %d %1$d', 1, 2, 3; # prints "3 1 1"
flags
one or more of:
space prefix positive number with a space
+ prefix positive number with a plus sign
- left-justify within the field
0 use zeros, not spaces, to right-justify
# ensure the leading "0" for any octal,
prefix non-zero hexadecimal with "0x" or "0X",
prefix non-zero binary with "0b" or "0B"
For example:
printf '<% d>', 12; # prints "< 12>"
printf '<%+d>', 12; # prints "<+12>"
printf '<%6s>', 12; # prints "< 12>"
printf '<%-6s>', 12; # prints "<12 >"
printf '<%06s>', 12; # prints "<000012>"
printf '<%#o>', 12; # prints "<014>"
printf '<%#x>', 12; # prints "<0xc>"
printf '<%#X>', 12; # prints "<0XC>"
printf '<%#b>', 12; # prints "<0b1100>"
printf '<%#B>', 12; # prints "<0B1100>"
When a space and a plus sign are given as the flags at once, a plus sign is
used to prefix a positive number.
printf '<%+ d>', 12; # prints "<+12>"
printf '<% +d>', 12; # prints "<+12>"
When the # flag and a precision are given in the %o conversion, the precision
is incremented if it's necessary for the leading "0".
printf '<%#.5o>', 012; # prints "<00012>"
printf '<%#.5o>', 012345; # prints "<012345>"
printf '<%#.0o>', 0; # prints "<0>"
vector flag
This flag tells perl to interpret the supplied string as a vector of integers,
one for each character in the string. Perl applies the format to each integer
in turn, then joins the resulting strings with a separator (a dot "." by
default). This can be useful for displaying ordinal values of characters in
arbitrary strings:
printf "%vd", "AB\x{100}"; # prints "65.66.256"
printf "version is v%vd\n", $^V; # Perl's version
Put an asterisk "*" before the "v" to override the string to use to separate
the numbers:
printf "address is %*vX\n", ":", $addr; # IPv6 address
printf "bits are %0*v8b\n", " ", $bits; # random bitstring
You can also explicitly specify the argument number to use for the join string
using e.g. "*2$v":
printf '%*4$vX %*4$vX %*4$vX', @addr[1..3], ":"; # 3 IPv6 addresses
(minimum) width
Arguments are usually formatted to be only as wide as required to display the
given value. You can override the width by putting a number here, or get the
width from the next argument (with "*") or from a specified argument (with
e.g. "*2$"):
printf '<%s>', "a"; # prints "<a>"
printf '<%6s>', "a"; # prints "< a>"
printf '<%*s>', 6, "a"; # prints "< a>"
printf '<%*2$s>', "a", 6; # prints "< a>"
printf '<%2s>', "long"; # prints "<long>" (does not truncate)
If a field width obtained through "*" is negative, it has the same effect as
the "-" flag: left-justification.
precision, or maximum width
You can specify a precision (for numeric conversions) or a maximum width (for
string conversions) by specifying a "." followed by a number. For floating
point formats, with the exception of 'g' and 'G', this specifies the number of
decimal places to show (the default being 6), e.g.:
# these examples are subject to system-specific variation
printf '<%f>', 1; # prints "<1.000000>"
printf '<%.1f>', 1; # prints "<1.0>"
printf '<%.0f>', 1; # prints "<1>"
printf '<%e>', 10; # prints "<1.000000e+01>"
printf '<%.1e>', 10; # prints "<1.0e+01>"
For 'g' and 'G', this specifies the maximum number of digits to show,
including prior to the decimal point as well as after it, e.g.:
# these examples are subject to system-specific variation
printf '<%g>', 1; # prints "<1>"
printf '<%.10g>', 1; # prints "<1>"
printf '<%g>', 100; # prints "<100>"
printf '<%.1g>', 100; # prints "<1e+02>"
printf '<%.2g>', 100.01; # prints "<1e+02>"
printf '<%.5g>', 100.01; # prints "<100.01>"
printf '<%.4g>', 100.01; # prints "<100>"
For integer conversions, specifying a precision implies that the output of the
number itself should be zero-padded to this width, where the 0 flag is
ignored:
printf '<%.6d>', 1; # prints "<000001>"
printf '<%+.6d>', 1; # prints "<+000001>"
printf '<%-10.6d>', 1; # prints "<000001 >"
printf '<%10.6d>', 1; # prints "< 000001>"
printf '<%010.6d>', 1; # prints "< 000001>"
printf '<%+10.6d>', 1; # prints "< +000001>"
printf '<%.6x>', 1; # prints "<000001>"
printf '<%#.6x>', 1; # prints "<0x000001>"
printf '<%-10.6x>', 1; # prints "<000001 >"
printf '<%10.6x>', 1; # prints "< 000001>"
printf '<%010.6x>', 1; # prints "< 000001>"
printf '<%#10.6x>', 1; # prints "< 0x000001>"
For string conversions, specifying a precision truncates the string to fit in
the specified width:
printf '<%.5s>', "truncated"; # prints "<trunc>"
printf '<%10.5s>', "truncated"; # prints "< trunc>"
You can also get the precision from the next argument using ".*":
printf '<%.6x>', 1; # prints "<000001>"
printf '<%.*x>', 6, 1; # prints "<000001>"
If a precision obtained through "*" is negative, it has the same effect as no
precision.
printf '<%.*s>', 7, "string"; # prints "<string>"
printf '<%.*s>', 3, "string"; # prints "<str>"
printf '<%.*s>', 0, "string"; # prints "<>"
printf '<%.*s>', -1, "string"; # prints "<string>"
printf '<%.*d>', 1, 0; # prints "<0>"
printf '<%.*d>', 0, 0; # prints "<>"
printf '<%.*d>', -1, 0; # prints "<0>"
You cannot currently get the precision from a specified number, but it is
intended that this will be possible in the future using e.g. ".*2$":
printf '<%.*2$x>', 1, 6; # INVALID, but in future will print "<000001>"
size
For numeric conversions, you can specify the size to interpret the number as
using "l", "h", "V", "q", "L", or "ll". For integer conversions ("d u o x X b
i D U O"), numbers are usually assumed to be whatever the default integer size
is on your platform (usually 32 or 64 bits), but you can override this to use
instead one of the standard C types, as supported by the compiler used to
build Perl:
l interpret integer as C type "long" or "unsigned long"
h interpret integer as C type "short" or "unsigned short"
q, L or ll interpret integer as C type "long long", "unsigned long long".
or "quads" (typically 64-bit integers)
The last will produce errors if Perl does not understand "quads" in your
installation. (This requires that either the platform natively supports quads
or Perl was specifically compiled to support quads.) You can find out whether
your Perl supports quads via Config:
use Config;
($Config{use64bitint} eq 'define' || $Config{longsize} >= 8) &&
print "quads\n";
For floating point conversions ("e f g E F G"), numbers are usually assumed to
be the default floating point size on your platform (double or long double),
but you can force 'long double' with "q", "L", or "ll" if your platform
supports them. You can find out whether your Perl supports long doubles via
Config:
use Config;
$Config{d_longdbl} eq 'define' && print "long doubles\n";
You can find out whether Perl considers 'long double' to be the default
floating point size to use on your platform via Config:
use Config;
($Config{uselongdouble} eq 'define') &&
print "long doubles by default\n";
It can also be the case that long doubles and doubles are the same thing:
use Config;
($Config{doublesize} == $Config{longdblsize}) &&
print "doubles are long doubles\n";
The size specifier "V" has no effect for Perl code, but it is supported for
compatibility with XS code; it means 'use the standard size for a Perl integer
(or floating-point number)', which is already the default for Perl code.
order of arguments
Normally, sprintf takes the next unused argument as the value to format for
each format specification. If the format specification uses "*" to require
additional arguments, these are consumed from the argument list in the order
in which they appear in the format specification before the value to format.
Where an argument is specified using an explicit index, this does not affect
the normal order for the arguments (even when the explicitly specified index
would have been the next argument in any case).
So:
printf '<%*.*s>', $a, $b, $c;
would use $a for the width, $b for the precision and $c as the value to
format, while:
printf '<%*1$.*s>', $a, $b;
would use $a for the width and the precision, and $b as the value to format.
Here are some more examples - beware that when using an explicit index, the
"$" may need to be escaped:
printf "%2\$d %d\n", 12, 34; # will print "34 12\n"
printf "%2\$d %d %d\n", 12, 34; # will print "34 12 34\n"
printf "%3\$d %d %d\n", 12, 34, 56; # will print "56 12 34\n"
printf "%2\$*3\$d %d\n", 12, 34, 3; # will print " 34 12\n"
If "use locale" is in effect, and POSIX::setlocale() has been called, the
character used for the decimal separator in formatted floating point numbers is
affected by the LC_NUMERIC locale. See perllocale and POSIX.
sqrt EXPR
sqrt Return the square root of EXPR. If EXPR is omitted, returns square root of $_.
Only works on non-negative operands, unless you've loaded the standard
Math::Complex module.
use Math::Complex;
print sqrt(-2); # prints 1.4142135623731i
srand EXPR
srand Sets the random number seed for the "rand" operator.
The point of the function is to "seed" the "rand" function so that "rand" can
produce a different sequence each time you run your program.
If srand() is not called explicitly, it is called implicitly at the first use of
the "rand" operator. However, this was not the case in versions of Perl before
5.004, so if your script will run under older Perl versions, it should call
"srand".
Most programs won't even call srand() at all, except those that need a
cryptographically-strong starting point rather than the generally acceptable
default, which is based on time of day, process ID, and memory allocation, or the
/dev/urandom device, if available.
You can call srand($seed) with the same $seed to reproduce the same sequence from
rand(), but this is usually reserved for generating predictable results for
testing or debugging. Otherwise, don't call srand() more than once in your
program.
Do not call srand() (i.e. without an argument) more than once in a script. The
internal state of the random number generator should contain more entropy than can
be provided by any seed, so calling srand() again actually loses randomness.
Most implementations of "srand" take an integer and will silently truncate decimal
numbers. This means "srand(42)" will usually produce the same results as
"srand(42.1)". To be safe, always pass "srand" an integer.
In versions of Perl prior to 5.004 the default seed was just the current "time".
This isn't a particularly good seed, so many old programs supply their own seed
value (often "time ^ $$" or "time ^ ($$ + ($$ << 15))"), but that isn't necessary
any more.
For cryptographic purposes, however, you need something much more random than the
default seed. Checksumming the compressed output of one or more rapidly changing
operating system status programs is the usual method. For example:
srand (time ^ $$ ^ unpack "%L*", `ps axww | gzip -f`);
If you're particularly concerned with this, see the "Math::TrulyRandom" module in
CPAN.
Frequently called programs (like CGI scripts) that simply use
time ^ $$
for a seed can fall prey to the mathematical property that
a^b == (a+1)^(b+1)
one-third of the time. So don't do that.
stat FILEHANDLE
stat EXPR
stat DIRHANDLE
stat Returns a 13-element list giving the status info for a file, either the file
opened via FILEHANDLE or DIRHANDLE, or named by EXPR. If EXPR is omitted, it
stats $_. Returns a null list if the stat fails. Typically used as follows:
($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,
$atime,$mtime,$ctime,$blksize,$blocks)
= stat($filename);
Not all fields are supported on all filesystem types. Here are the meanings of
the fields:
0 dev device number of filesystem
1 ino inode number
2 mode file mode (type and permissions)
3 nlink number of (hard) links to the file
4 uid numeric user ID of file's owner
5 gid numeric group ID of file's owner
6 rdev the device identifier (special files only)
7 size total size of file, in bytes
8 atime last access time in seconds since the epoch
9 mtime last modify time in seconds since the epoch
10 ctime inode change time in seconds since the epoch (*)
11 blksize preferred block size for file system I/O
12 blocks actual number of blocks allocated
(The epoch was at 00:00 January 1, 1970 GMT.)
(*) Not all fields are supported on all filesystem types. Notably, the ctime field
is non-portable. In particular, you cannot expect it to be a "creation time", see
"Files and Filesystems" in perlport for details.
If "stat" is passed the special filehandle consisting of an underline, no stat is
done, but the current contents of the stat structure from the last "stat",
"lstat", or filetest are returned. Example:
if (-x $file && (($d) = stat(_)) && $d < 0) {
print "$file is executable NFS file\n";
}
(This works on machines only for which the device number is negative under NFS.)
Because the mode contains both the file type and its permissions, you should mask
off the file type portion and (s)printf using a "%o" if you want to see the real
permissions.
$mode = (stat($filename))[2];
printf "Permissions are %04o\n", $mode & 07777;
In scalar context, "stat" returns a boolean value indicating success or failure,
and, if successful, sets the information associated with the special filehandle
"_".
The File::stat module provides a convenient, by-name access mechanism:
use File::stat;
$sb = stat($filename);
printf "File is %s, size is %s, perm %04o, mtime %s\n",
$filename, $sb->size, $sb->mode & 07777,
scalar localtime $sb->mtime;
You can import symbolic mode constants ("S_IF*") and functions ("S_IS*") from the
Fcntl module:
use Fcntl ':mode';
$mode = (stat($filename))[2];
$user_rwx = ($mode & S_IRWXU) >> 6;
$group_read = ($mode & S_IRGRP) >> 3;
$other_execute = $mode & S_IXOTH;
printf "Permissions are %04o\n", S_IMODE($mode), "\n";
$is_setuid = $mode & S_ISUID;
$is_directory = S_ISDIR($mode);
You could write the last two using the "-u" and "-d" operators. The commonly
available "S_IF*" constants are
# Permissions: read, write, execute, for user, group, others.
S_IRWXU S_IRUSR S_IWUSR S_IXUSR
S_IRWXG S_IRGRP S_IWGRP S_IXGRP
S_IRWXO S_IROTH S_IWOTH S_IXOTH
# Setuid/Setgid/Stickiness/SaveText.
# Note that the exact meaning of these is system dependent.
S_ISUID S_ISGID S_ISVTX S_ISTXT
# File types. Not necessarily all are available on your system.
S_IFREG S_IFDIR S_IFLNK S_IFBLK S_IFCHR S_IFIFO S_IFSOCK S_IFWHT S_ENFMT
# The following are compatibility aliases for S_IRUSR, S_IWUSR, S_IXUSR.
S_IREAD S_IWRITE S_IEXEC
and the "S_IF*" functions are
S_IMODE($mode) the part of $mode containing the permission bits
and the setuid/setgid/sticky bits
S_IFMT($mode) the part of $mode containing the file type
which can be bit-anded with e.g. S_IFREG
or with the following functions
# The operators -f, -d, -l, -b, -c, -p, and -S.
S_ISREG($mode) S_ISDIR($mode) S_ISLNK($mode)
S_ISBLK($mode) S_ISCHR($mode) S_ISFIFO($mode) S_ISSOCK($mode)
# No direct -X operator counterpart, but for the first one
# the -g operator is often equivalent. The ENFMT stands for
# record flocking enforcement, a platform-dependent feature.
S_ISENFMT($mode) S_ISWHT($mode)
See your native chmod(2) and stat(2) documentation for more details about the
"S_*" constants. To get status info for a symbolic link instead of the target
file behind the link, use the "lstat" function.
state EXPR
state TYPE EXPR
state EXPR : ATTRS
state TYPE EXPR : ATTRS
"state" declares a lexically scoped variable, just like "my" does. However, those
variables will never be reinitialized, contrary to lexical variables that are
reinitialized each time their enclosing block is entered.
"state" variables are only enabled when the "feature 'state'" pragma is in effect.
See feature.
study SCALAR
study Takes extra time to study SCALAR ($_ if unspecified) in anticipation of doing many
pattern matches on the string before it is next modified. This may or may not
save time, depending on the nature and number of patterns you are searching on,
and on the distribution of character frequencies in the string to be searched--you
probably want to compare run times with and without it to see which runs faster.
Those loops that scan for many short constant strings (including the constant
parts of more complex patterns) will benefit most. You may have only one "study"
active at a time--if you study a different scalar the first is "unstudied". (The
way "study" works is this: a linked list of every character in the string to be
searched is made, so we know, for example, where all the 'k' characters are. From
each search string, the rarest character is selected, based on some static
frequency tables constructed from some C programs and English text. Only those
places that contain this "rarest" character are examined.)
For example, here is a loop that inserts index producing entries before any line
containing a certain pattern:
while (<>) {
study;
print ".IX foo\n" if /\bfoo\b/;
print ".IX bar\n" if /\bbar\b/;
print ".IX blurfl\n" if /\bblurfl\b/;
# ...
print;
}
In searching for "/\bfoo\b/", only those locations in $_ that contain "f" will be
looked at, because "f" is rarer than "o". In general, this is a big win except in
pathological cases. The only question is whether it saves you more time than it
took to build the linked list in the first place.
Note that if you have to look for strings that you don't know till runtime, you
can build an entire loop as a string and "eval" that to avoid recompiling all your
patterns all the time. Together with undefining $/ to input entire files as one
record, this can be very fast, often faster than specialized programs like
fgrep(1). The following scans a list of files (@files) for a list of words
(@words), and prints out the names of those files that contain a match:
$search = 'while (<>) { study;';
foreach $word (@words) {
$search .= "++\$seen{\$ARGV} if /\\b$word\\b/;\n";
}
$search .= "}";
@ARGV = @files;
undef $/;
eval $search; # this screams
$/ = "\n"; # put back to normal input delimiter
foreach $file (sort keys(%seen)) {
print $file, "\n";
}
sub NAME BLOCK
sub NAME (PROTO) BLOCK
sub NAME : ATTRS BLOCK
sub NAME (PROTO) : ATTRS BLOCK
This is subroutine definition, not a real function per se. Without a BLOCK it's
just a forward declaration. Without a NAME, it's an anonymous function
declaration, and does actually return a value: the CODE ref of the closure you
just created.
See perlsub and perlref for details about subroutines and references, and
attributes and Attribute::Handlers for more information about attributes.
substr EXPR,OFFSET,LENGTH,REPLACEMENT
substr EXPR,OFFSET,LENGTH
substr EXPR,OFFSET
Extracts a substring out of EXPR and returns it. First character is at offset 0,
or whatever you've set $[ to (but don't do that). If OFFSET is negative (or more
precisely, less than $[), starts that far from the end of the string. If LENGTH
is omitted, returns everything to the end of the string. If LENGTH is negative,
leaves that many characters off the end of the string.
my $s = "The black cat climbed the green tree";
my $color = substr $s, 4, 5; # black
my $middle = substr $s, 4, -11; # black cat climbed the
my $end = substr $s, 14; # climbed the green tree
my $tail = substr $s, -4; # tree
my $z = substr $s, -4, 2; # tr
You can use the substr() function as an lvalue, in which case EXPR must itself be
an lvalue. If you assign something shorter than LENGTH, the string will shrink,
and if you assign something longer than LENGTH, the string will grow to
accommodate it. To keep the string the same length you may need to pad or chop
your value using "sprintf".
If OFFSET and LENGTH specify a substring that is partly outside the string, only
the part within the string is returned. If the substring is beyond either end of
the string, substr() returns the undefined value and produces a warning. When
used as an lvalue, specifying a substring that is entirely outside the string is a
fatal error. Here's an example showing the behavior for boundary cases:
my $name = 'fred';
substr($name, 4) = 'dy'; # $name is now 'freddy'
my $null = substr $name, 6, 2; # returns '' (no warning)
my $oops = substr $name, 7; # returns undef, with warning
substr($name, 7) = 'gap'; # fatal error
An alternative to using substr() as an lvalue is to specify the replacement string
as the 4th argument. This allows you to replace parts of the EXPR and return what
was there before in one operation, just as you can with splice().
my $s = "The black cat climbed the green tree";
my $z = substr $s, 14, 7, "jumped from"; # climbed
# $s is now "The black cat jumped from the green tree"
Note that the lvalue returned by the 3-arg version of substr() acts as a 'magic
bullet'; each time it is assigned to, it remembers which part of the original
string is being modified; for example:
$x = '1234';
for (substr($x,1,2)) {
$_ = 'a'; print $x,"\n"; # prints 1a4
$_ = 'xyz'; print $x,"\n"; # prints 1xyz4
$x = '56789';
$_ = 'pq'; print $x,"\n"; # prints 5pq9
}
Prior to Perl version 5.9.1, the result of using an lvalue multiple times was
unspecified.
symlink OLDFILE,NEWFILE
Creates a new filename symbolically linked to the old filename. Returns 1 for
success, 0 otherwise. On systems that don't support symbolic links, produces a
fatal error at run time. To check for that, use eval:
$symlink_exists = eval { symlink("",""); 1 };
syscall NUMBER, LIST
Calls the system call specified as the first element of the list, passing the
remaining elements as arguments to the system call. If unimplemented, produces a
fatal error. The arguments are interpreted as follows: if a given argument is
numeric, the argument is passed as an int. If not, the pointer to the string
value is passed. You are responsible to make sure a string is pre-extended long
enough to receive any result that might be written into a string. You can't use a
string literal (or other read-only string) as an argument to "syscall" because
Perl has to assume that any string pointer might be written through. If your
integer arguments are not literals and have never been interpreted in a numeric
context, you may need to add 0 to them to force them to look like numbers. This
emulates the "syswrite" function (or vice versa):
require 'syscall.ph'; # may need to run h2ph
$s = "hi there\n";
syscall(&SYS_write, fileno(STDOUT), $s, length $s);
Note that Perl supports passing of up to only 14 arguments to your system call,
which in practice should usually suffice.
Syscall returns whatever value returned by the system call it calls. If the
system call fails, "syscall" returns "-1" and sets $! (errno). Note that some
system calls can legitimately return "-1". The proper way to handle such calls is
to assign "$!=0;" before the call and check the value of $! if syscall returns
"-1".
There's a problem with "syscall(&SYS_pipe)": it returns the file number of the
read end of the pipe it creates. There is no way to retrieve the file number of
the other end. You can avoid this problem by using "pipe" instead.
sysopen FILEHANDLE,FILENAME,MODE
sysopen FILEHANDLE,FILENAME,MODE,PERMS
Opens the file whose filename is given by FILENAME, and associates it with
FILEHANDLE. If FILEHANDLE is an expression, its value is used as the name of the
real filehandle wanted. This function calls the underlying operating system's
"open" function with the parameters FILENAME, MODE, PERMS.
The possible values and flag bits of the MODE parameter are system-dependent; they
are available via the standard module "Fcntl". See the documentation of your
operating system's "open" to see which values and flag bits are available. You
may combine several flags using the "|"-operator.
Some of the most common values are "O_RDONLY" for opening the file in read-only
mode, "O_WRONLY" for opening the file in write-only mode, and "O_RDWR" for opening
the file in read-write mode.
For historical reasons, some values work on almost every system supported by perl:
zero means read-only, one means write-only, and two means read/write. We know
that these values do not work under OS/390 & VM/ESA Unix and on the Macintosh; you
probably don't want to use them in new code.
If the file named by FILENAME does not exist and the "open" call creates it
(typically because MODE includes the "O_CREAT" flag), then the value of PERMS
specifies the permissions of the newly created file. If you omit the PERMS
argument to "sysopen", Perl uses the octal value 0666. These permission values
need to be in octal, and are modified by your process's current "umask".
In many systems the "O_EXCL" flag is available for opening files in exclusive
mode. This is not locking: exclusiveness means here that if the file already
exists, sysopen() fails. "O_EXCL" may not work on network filesystems, and has no
effect unless the "O_CREAT" flag is set as well. Setting "O_CREAT|O_EXCL"
prevents the file from being opened if it is a symbolic link. It does not protect
against symbolic links in the file's path.
Sometimes you may want to truncate an already-existing file. This can be done
using the "O_TRUNC" flag. The behavior of "O_TRUNC" with "O_RDONLY" is undefined.
You should seldom if ever use 0644 as argument to "sysopen", because that takes
away the user's option to have a more permissive umask. Better to omit it. See
the perlfunc(1) entry on "umask" for more on this.
Note that "sysopen" depends on the fdopen() C library function. On many UNIX
systems, fdopen() is known to fail when file descriptors exceed a certain value,
typically 255. If you need more file descriptors than that, consider rebuilding
Perl to use the "sfio" library, or perhaps using the POSIX::open() function.
See perlopentut for a kinder, gentler explanation of opening files.
sysread FILEHANDLE,SCALAR,LENGTH,OFFSET
sysread FILEHANDLE,SCALAR,LENGTH
Attempts to read LENGTH bytes of data into variable SCALAR from the specified
FILEHANDLE, using the system call read(2). It bypasses buffered IO, so mixing
this with other kinds of reads, "print", "write", "seek", "tell", or "eof" can
cause confusion because the perlio or stdio layers usually buffers data. Returns
the number of bytes actually read, 0 at end of file, or undef if there was an
error (in the latter case $! is also set). SCALAR will be grown or shrunk so that
the last byte actually read is the last byte of the scalar after the read.
An OFFSET may be specified to place the read data at some place in the string
other than the beginning. A negative OFFSET specifies placement at that many
characters counting backwards from the end of the string. A positive OFFSET
greater than the length of SCALAR results in the string being padded to the
required size with "\0" bytes before the result of the read is appended.
There is no syseof() function, which is ok, since eof() doesn't work very well on
device files (like ttys) anyway. Use sysread() and check for a return value for 0
to decide whether you're done.
Note that if the filehandle has been marked as ":utf8" Unicode characters are read
instead of bytes (the LENGTH, OFFSET, and the return value of sysread() are in
Unicode characters). The ":encoding(...)" layer implicitly introduces the ":utf8"
layer. See "binmode", "open", and the "open" pragma, open.
sysseek FILEHANDLE,POSITION,WHENCE
Sets FILEHANDLE's system position in bytes using the system call lseek(2).
FILEHANDLE may be an expression whose value gives the name of the filehandle. The
values for WHENCE are 0 to set the new position to POSITION, 1 to set the it to
the current position plus POSITION, and 2 to set it to EOF plus POSITION
(typically negative).
Note the in bytes: even if the filehandle has been set to operate on characters
(for example by using the ":encoding(utf8)" I/O layer), tell() will return byte
offsets, not character offsets (because implementing that would render sysseek()
very slow).
sysseek() bypasses normal buffered IO, so mixing this with reads (other than
"sysread", for example "<>" or read()) "print", "write", "seek", "tell", or "eof"
may cause confusion.
For WHENCE, you may also use the constants "SEEK_SET", "SEEK_CUR", and "SEEK_END"
(start of the file, current position, end of the file) from the Fcntl module. Use
of the constants is also more portable than relying on 0, 1, and 2. For example
to define a "systell" function:
use Fcntl 'SEEK_CUR';
sub systell { sysseek($_[0], 0, SEEK_CUR) }
Returns the new position, or the undefined value on failure. A position of zero
is returned as the string "0 but true"; thus "sysseek" returns true on success and
false on failure, yet you can still easily determine the new position.
system LIST
system PROGRAM LIST
Does exactly the same thing as "exec LIST", except that a fork is done first, and
the parent process waits for the child process to complete. Note that argument
processing varies depending on the number of arguments. If there is more than one
argument in LIST, or if LIST is an array with more than one value, starts the
program given by the first element of the list with arguments given by the rest of
the list. If there is only one scalar argument, the argument is checked for shell
metacharacters, and if there are any, the entire argument is passed to the
system's command shell for parsing (this is "/bin/sh -c" on Unix platforms, but
varies on other platforms). If there are no shell metacharacters in the argument,
it is split into words and passed directly to "execvp", which is more efficient.
Beginning with v5.6.0, Perl will attempt to flush all files opened for output
before any operation that may do a fork, but this may not be supported on some
platforms (see perlport). To be safe, you may need to set $| ($AUTOFLUSH in
English) or call the "autoflush()" method of "IO::Handle" on any open handles.
The return value is the exit status of the program as returned by the "wait" call.
To get the actual exit value, shift right by eight (see below). See also "exec".
This is not what you want to use to capture the output from a command, for that
you should use merely backticks or "qx//", as described in "`STRING`" in perlop.
Return value of -1 indicates a failure to start the program or an error of the
wait(2) system call (inspect $! for the reason).
Like "exec", "system" allows you to lie to a program about its name if you use the
"system PROGRAM LIST" syntax. Again, see "exec".
Since "SIGINT" and "SIGQUIT" are ignored during the execution of "system", if you
expect your program to terminate on receipt of these signals you will need to
arrange to do so yourself based on the return value.
@args = ("command", "arg1", "arg2");
system(@args) == 0
or die "system @args failed: $?"
You can check all the failure possibilities by inspecting $? like this:
if ($? == -1) {
print "failed to execute: $!\n";
}
elsif ($? & 127) {
printf "child died with signal %d, %s coredump\n",
($? & 127), ($? & 128) ? 'with' : 'without';
}
else {
printf "child exited with value %d\n", $? >> 8;
}
Alternatively you might inspect the value of "${^CHILD_ERROR_NATIVE}" with the
W*() calls of the POSIX extension.
When the arguments get executed via the system shell, results and return codes
will be subject to its quirks and capabilities. See "`STRING`" in perlop and
"exec" for details.
syswrite FILEHANDLE,SCALAR,LENGTH,OFFSET
syswrite FILEHANDLE,SCALAR,LENGTH
syswrite FILEHANDLE,SCALAR
Attempts to write LENGTH bytes of data from variable SCALAR to the specified
FILEHANDLE, using the system call write(2). If LENGTH is not specified, writes
whole SCALAR. It bypasses buffered IO, so mixing this with reads (other than
sysread()), "print", "write", "seek", "tell", or "eof" may cause confusion because
the perlio and stdio layers usually buffers data. Returns the number of bytes
actually written, or "undef" if there was an error (in this case the errno
variable $! is also set). If the LENGTH is greater than the available data in the
SCALAR after the OFFSET, only as much data as is available will be written.
An OFFSET may be specified to write the data from some part of the string other
than the beginning. A negative OFFSET specifies writing that many characters
counting backwards from the end of the string. In the case the SCALAR is empty
you can use OFFSET but only zero offset.
Note that if the filehandle has been marked as ":utf8", Unicode characters are
written instead of bytes (the LENGTH, OFFSET, and the return value of syswrite()
are in UTF-8 encoded Unicode characters). The ":encoding(...)" layer implicitly
introduces the ":utf8" layer. See "binmode", "open", and the "open" pragma, open.
tell FILEHANDLE
tell Returns the current position in bytes for FILEHANDLE, or -1 on error. FILEHANDLE
may be an expression whose value gives the name of the actual filehandle. If
FILEHANDLE is omitted, assumes the file last read.
Note the in bytes: even if the filehandle has been set to operate on characters
(for example by using the ":encoding(utf8)" open layer), tell() will return byte
offsets, not character offsets (because that would render seek() and tell() rather
slow).
The return value of tell() for the standard streams like the STDIN depends on the
operating system: it may return -1 or something else. tell() on pipes, fifos, and
sockets usually returns -1.
There is no "systell" function. Use "sysseek(FH, 0, 1)" for that.
Do not use tell() (or other buffered I/O operations) on a file handle that has
been manipulated by sysread(), syswrite() or sysseek(). Those functions ignore
the buffering, while tell() does not.
telldir DIRHANDLE
Returns the current position of the "readdir" routines on DIRHANDLE. Value may be
given to "seekdir" to access a particular location in a directory. "telldir" has
the same caveats about possible directory compaction as the corresponding system
library routine.
tie VARIABLE,CLASSNAME,LIST
This function binds a variable to a package class that will provide the
implementation for the variable. VARIABLE is the name of the variable to be
enchanted. CLASSNAME is the name of a class implementing objects of correct type.
Any additional arguments are passed to the "new" method of the class (meaning
"TIESCALAR", "TIEHANDLE", "TIEARRAY", or "TIEHASH"). Typically these are
arguments such as might be passed to the "dbm_open()" function of C. The object
returned by the "new" method is also returned by the "tie" function, which would
be useful if you want to access other methods in CLASSNAME.
Note that functions such as "keys" and "values" may return huge lists when used on
large objects, like DBM files. You may prefer to use the "each" function to
iterate over such. Example:
# print out history file offsets
use NDBM_File;
tie(%HIST, 'NDBM_File', '/usr/lib/news/history', 1, 0);
while (($key,$val) = each %HIST) {
print $key, ' = ', unpack('L',$val), "\n";
}
untie(%HIST);
A class implementing a hash should have the following methods:
TIEHASH classname, LIST
FETCH this, key
STORE this, key, value
DELETE this, key
CLEAR this
EXISTS this, key
FIRSTKEY this
NEXTKEY this, lastkey
SCALAR this
DESTROY this
UNTIE this
A class implementing an ordinary array should have the following methods:
TIEARRAY classname, LIST
FETCH this, key
STORE this, key, value
FETCHSIZE this
STORESIZE this, count
CLEAR this
PUSH this, LIST
POP this
SHIFT this
UNSHIFT this, LIST
SPLICE this, offset, length, LIST
EXTEND this, count
DESTROY this
UNTIE this
A class implementing a file handle should have the following methods:
TIEHANDLE classname, LIST
READ this, scalar, length, offset
READLINE this
GETC this
WRITE this, scalar, length, offset
PRINT this, LIST
PRINTF this, format, LIST
BINMODE this
EOF this
FILENO this
SEEK this, position, whence
TELL this
OPEN this, mode, LIST
CLOSE this
DESTROY this
UNTIE this
A class implementing a scalar should have the following methods:
TIESCALAR classname, LIST
FETCH this,
STORE this, value
DESTROY this
UNTIE this
Not all methods indicated above need be implemented. See perltie, Tie::Hash,
Tie::Array, Tie::Scalar, and Tie::Handle.
Unlike "dbmopen", the "tie" function will not use or require a module for you--you
need to do that explicitly yourself. See DB_File or the Config module for
interesting "tie" implementations.
For further details see perltie, "tied VARIABLE".
tied VARIABLE
Returns a reference to the object underlying VARIABLE (the same value that was
originally returned by the "tie" call that bound the variable to a package.)
Returns the undefined value if VARIABLE isn't tied to a package.
time Returns the number of non-leap seconds since whatever time the system considers to
be the epoch, suitable for feeding to "gmtime" and "localtime". On most systems
the epoch is 00:00:00 UTC, January 1, 1970; a prominent exception being Mac OS
Classic which uses 00:00:00, January 1, 1904 in the current local time zone for
its epoch.
For measuring time in better granularity than one second, you may use either the
Time::HiRes module (from CPAN, and starting from Perl 5.8 part of the standard
distribution), or if you have gettimeofday(2), you may be able to use the
"syscall" interface of Perl. See perlfaq8 for details.
For date and time processing look at the many related modules on CPAN. For a
comprehensive date and time representation look at the DateTime module.
times Returns a four-element list giving the user and system times, in seconds, for this
process and the children of this process.
($user,$system,$cuser,$csystem) = times;
In scalar context, "times" returns $user.
Note that times for children are included only after they terminate.
tr/// The transliteration operator. Same as "y///". See perlop.
truncate FILEHANDLE,LENGTH
truncate EXPR,LENGTH
Truncates the file opened on FILEHANDLE, or named by EXPR, to the specified
length. Produces a fatal error if truncate isn't implemented on your system.
Returns true if successful, the undefined value otherwise.
The behavior is undefined if LENGTH is greater than the length of the file.
The position in the file of FILEHANDLE is left unchanged. You may want to call
seek before writing to the file.
uc EXPR
uc Returns an uppercased version of EXPR. This is the internal function implementing
the "\U" escape in double-quoted strings. Respects current LC_CTYPE locale if
"use locale" in force. See perllocale and perlunicode for more details about
locale and Unicode support. It does not attempt to do titlecase mapping on
initial letters. See "ucfirst" for that.
If EXPR is omitted, uses $_.
ucfirst EXPR
ucfirst Returns the value of EXPR with the first character in uppercase (titlecase in
Unicode). This is the internal function implementing the "\u" escape in double-
quoted strings. Respects current LC_CTYPE locale if "use locale" in force. See
perllocale and perlunicode for more details about locale and Unicode support.
If EXPR is omitted, uses $_.
umask EXPR
umask Sets the umask for the process to EXPR and returns the previous value. If EXPR is
omitted, merely returns the current umask.
The Unix permission "rwxr-x---" is represented as three sets of three bits, or
three octal digits: 0750 (the leading 0 indicates octal and isn't one of the
digits). The "umask" value is such a number representing disabled permissions
bits. The permission (or "mode") values you pass "mkdir" or "sysopen" are
modified by your umask, so even if you tell "sysopen" to create a file with
permissions 0777, if your umask is 0022 then the file will actually be created
with permissions 0755. If your "umask" were 0027 (group can't write; others can't
read, write, or execute), then passing "sysopen" 0666 would create a file with
mode 0640 ("0666 &~ 027" is 0640).
Here's some advice: supply a creation mode of 0666 for regular files (in
"sysopen") and one of 0777 for directories (in "mkdir") and executable files.
This gives users the freedom of choice: if they want protected files, they might
choose process umasks of 022, 027, or even the particularly antisocial mask of
077. Programs should rarely if ever make policy decisions better left to the
user. The exception to this is when writing files that should be kept private:
mail files, web browser cookies, .rhosts files, and so on.
If umask(2) is not implemented on your system and you are trying to restrict
access for yourself (i.e., (EXPR & 0700) > 0), produces a fatal error at run time.
If umask(2) is not implemented and you are not trying to restrict access for
yourself, returns "undef".
Remember that a umask is a number, usually given in octal; it is not a string of
octal digits. See also "oct", if all you have is a string.
undef EXPR
undef Undefines the value of EXPR, which must be an lvalue. Use only on a scalar value,
an array (using "@"), a hash (using "%"), a subroutine (using "&"), or a typeglob
(using "*"). (Saying "undef $hash{$key}" will probably not do what you expect on
most predefined variables or DBM list values, so don't do that; see delete.)
Always returns the undefined value. You can omit the EXPR, in which case nothing
is undefined, but you still get an undefined value that you could, for instance,
return from a subroutine, assign to a variable or pass as a parameter. Examples:
undef $foo;
undef $bar{'blurfl'}; # Compare to: delete $bar{'blurfl'};
undef @ary;
undef %hash;
undef &mysub;
undef *xyz; # destroys $xyz, @xyz, %xyz, &xyz, etc.
return (wantarray ? (undef, $errmsg) : undef) if $they_blew_it;
select undef, undef, undef, 0.25;
($a, $b, undef, $c) = &foo; # Ignore third value returned
Note that this is a unary operator, not a list operator.
unlink LIST
unlink Deletes a list of files. Returns the number of files successfully deleted.
$cnt = unlink 'a', 'b', 'c';
unlink @goners;
unlink <*.bak>;
Note: "unlink" will not attempt to delete directories unless you are superuser and
the -U flag is supplied to Perl. Even if these conditions are met, be warned that
unlinking a directory can inflict damage on your filesystem. Finally, using
"unlink" on directories is not supported on many operating systems. Use "rmdir"
instead.
If LIST is omitted, uses $_.
unpack TEMPLATE,EXPR
unpack TEMPLATE
"unpack" does the reverse of "pack": it takes a string and expands it out into a
list of values. (In scalar context, it returns merely the first value produced.)
If EXPR is omitted, unpacks the $_ string.
The string is broken into chunks described by the TEMPLATE. Each chunk is
converted separately to a value. Typically, either the string is a result of
"pack", or the characters of the string represent a C structure of some kind.
The TEMPLATE has the same format as in the "pack" function. Here's a subroutine
that does substring:
sub substr {
my($what,$where,$howmuch) = @_;
unpack("x$where a$howmuch", $what);
}
and then there's
sub ordinal { unpack("W",$_[0]); } # same as ord()
In addition to fields allowed in pack(), you may prefix a field with a %<number>
to indicate that you want a <number>-bit checksum of the items instead of the
items themselves. Default is a 16-bit checksum. Checksum is calculated by
summing numeric values of expanded values (for string fields the sum of
"ord($char)" is taken, for bit fields the sum of zeroes and ones).
For example, the following computes the same number as the System V sum program:
$checksum = do {
local $/; # slurp!
unpack("%32W*",<>) % 65535;
};
The following efficiently counts the number of set bits in a bit vector:
$setbits = unpack("%32b*", $selectmask);
The "p" and "P" formats should be used with care. Since Perl has no way of
checking whether the value passed to "unpack()" corresponds to a valid memory
location, passing a pointer value that's not known to be valid is likely to have
disastrous consequences.
If there are more pack codes or if the repeat count of a field or a group is
larger than what the remainder of the input string allows, the result is not well
defined: in some cases, the repeat count is decreased, or "unpack()" will produce
null strings or zeroes, or terminate with an error. If the input string is longer
than one described by the TEMPLATE, the rest is ignored.
See "pack" for more examples and notes.
untie VARIABLE
Breaks the binding between a variable and a package. (See "tie".) Has no effect
if the variable is not tied.
unshift ARRAY,LIST
Does the opposite of a "shift". Or the opposite of a "push", depending on how you
look at it. Prepends list to the front of the array, and returns the new number
of elements in the array.
unshift(@ARGV, '-e') unless $ARGV[0] =~ /^-/;
Note the LIST is prepended whole, not one element at a time, so the prepended
elements stay in the same order. Use "reverse" to do the reverse.
use Module VERSION LIST
use Module VERSION
use Module LIST
use Module
use VERSION
Imports some semantics into the current package from the named module, generally
by aliasing certain subroutine or variable names into your package. It is exactly
equivalent to
BEGIN { require Module; Module->import( LIST ); }
except that Module must be a bareword.
In the peculiar "use VERSION" form, VERSION may be either a numeric argument such
as 5.006, which will be compared to $], or a literal of the form v5.6.1, which
will be compared to $^V (aka $PERL_VERSION). A fatal error is produced if VERSION
is greater than the version of the current Perl interpreter; Perl will not attempt
to parse the rest of the file. Compare with "require", which can do a similar
check at run time. Symmetrically, "no VERSION" allows you to specify that you
want a version of perl older than the specified one.
Specifying VERSION as a literal of the form v5.6.1 should generally be avoided,
because it leads to misleading error messages under earlier versions of Perl (that
is, prior to 5.6.0) that do not support this syntax. The equivalent numeric
version should be used instead.
use v5.6.1; # compile time version check
use 5.6.1; # ditto
use 5.006_001; # ditto; preferred for backwards compatibility
This is often useful if you need to check the current Perl version before "use"ing
library modules that won't work with older versions of Perl. (We try not to do
this more than we have to.)
Also, if the specified perl version is greater than or equal to 5.9.5, "use
VERSION" will also load the "feature" pragma and enable all features available in
the requested version. See feature.
The "BEGIN" forces the "require" and "import" to happen at compile time. The
"require" makes sure the module is loaded into memory if it hasn't been yet. The
"import" is not a builtin--it's just an ordinary static method call into the
"Module" package to tell the module to import the list of features back into the
current package. The module can implement its "import" method any way it likes,
though most modules just choose to derive their "import" method via inheritance
from the "Exporter" class that is defined in the "Exporter" module. See Exporter.
If no "import" method can be found then the call is skipped, even if there is an
AUTOLOAD method.
If you do not want to call the package's "import" method (for instance, to stop
your namespace from being altered), explicitly supply the empty list:
use Module ();
That is exactly equivalent to
BEGIN { require Module }
If the VERSION argument is present between Module and LIST, then the "use" will
call the VERSION method in class Module with the given version as an argument.
The default VERSION method, inherited from the UNIVERSAL class, croaks if the
given version is larger than the value of the variable $Module::VERSION.
Again, there is a distinction between omitting LIST ("import" called with no
arguments) and an explicit empty LIST "()" ("import" not called). Note that there
is no comma after VERSION!
Because this is a wide-open interface, pragmas (compiler directives) are also
implemented this way. Currently implemented pragmas are:
use constant;
use diagnostics;
use integer;
use sigtrap qw(SEGV BUS);
use strict qw(subs vars refs);
use subs qw(afunc blurfl);
use warnings qw(all);
use sort qw(stable _quicksort _mergesort);
Some of these pseudo-modules import semantics into the current block scope (like
"strict" or "integer", unlike ordinary modules, which import symbols into the
current package (which are effective through the end of the file).
There's a corresponding "no" command that unimports meanings imported by "use",
i.e., it calls "unimport Module LIST" instead of "import". It behaves exactly as
"import" does with respect to VERSION, an omitted LIST, empty LIST, or no unimport
method being found.
no integer;
no strict 'refs';
no warnings;
See perlmodlib for a list of standard modules and pragmas. See perlrun for the
"-M" and "-m" command-line options to perl that give "use" functionality from the
command-line.
utime LIST
Changes the access and modification times on each file of a list of files. The
first two elements of the list must be the NUMERICAL access and modification
times, in that order. Returns the number of files successfully changed. The
inode change time of each file is set to the current time. For example, this code
has the same effect as the Unix touch(1) command when the files already exist and
belong to the user running the program:
#!/usr/bin/perl
$atime = $mtime = time;
utime $atime, $mtime, @ARGV;
Since perl 5.7.2, if the first two elements of the list are "undef", then the
utime(2) function in the C library will be called with a null second argument. On
most systems, this will set the file's access and modification times to the
current time (i.e. equivalent to the example above) and will even work on other
users' files where you have write permission:
utime undef, undef, @ARGV;
Under NFS this will use the time of the NFS server, not the time of the local
machine. If there is a time synchronization problem, the NFS server and local
machine will have different times. The Unix touch(1) command will in fact
normally use this form instead of the one shown in the first example.
Note that only passing one of the first two elements as "undef" will be equivalent
of passing it as 0 and will not have the same effect as described when they are
both "undef". This case will also trigger an uninitialized warning.
On systems that support futimes, you might pass file handles among the files. On
systems that don't support futimes, passing file handles produces a fatal error at
run time. The file handles must be passed as globs or references to be
recognized. Barewords are considered file names.
values HASH
Returns a list consisting of all the values of the named hash. (In a scalar
context, returns the number of values.)
The values are returned in an apparently random order. The actual random order is
subject to change in future versions of perl, but it is guaranteed to be the same
order as either the "keys" or "each" function would produce on the same
(unmodified) hash. Since Perl 5.8.1 the ordering is different even between
different runs of Perl for security reasons (see "Algorithmic Complexity Attacks"
in perlsec).
As a side effect, calling values() resets the HASH's internal iterator, see
"each". (In particular, calling values() in void context resets the iterator with
no other overhead.)
Note that the values are not copied, which means modifying them will modify the
contents of the hash:
for (values %hash) { s/foo/bar/g } # modifies %hash values
for (@hash{keys %hash}) { s/foo/bar/g } # same
See also "keys", "each", and "sort".
vec EXPR,OFFSET,BITS
Treats the string in EXPR as a bit vector made up of elements of width BITS, and
returns the value of the element specified by OFFSET as an unsigned integer. BITS
therefore specifies the number of bits that are reserved for each element in the
bit vector. This must be a power of two from 1 to 32 (or 64, if your platform
supports that).
If BITS is 8, "elements" coincide with bytes of the input string.
If BITS is 16 or more, bytes of the input string are grouped into chunks of size
BITS/8, and each group is converted to a number as with pack()/unpack() with big-
endian formats "n"/"N" (and analogously for BITS==64). See "pack" for details.
If bits is 4 or less, the string is broken into bytes, then the bits of each byte
are broken into 8/BITS groups. Bits of a byte are numbered in a little-endian-ish
way, as in 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80. For example, breaking
the single input byte "chr(0x36)" into two groups gives a list "(0x6, 0x3)";
breaking it into 4 groups gives "(0x2, 0x1, 0x3, 0x0)".
"vec" may also be assigned to, in which case parentheses are needed to give the
expression the correct precedence as in
vec($image, $max_x * $x + $y, 8) = 3;
If the selected element is outside the string, the value 0 is returned. If an
element off the end of the string is written to, Perl will first extend the string
with sufficiently many zero bytes. It is an error to try to write off the
beginning of the string (i.e. negative OFFSET).
If the string happens to be encoded as UTF-8 internally (and thus has the UTF8
flag set), this is ignored by "vec", and it operates on the internal byte string,
not the conceptual character string, even if you only have characters with values
less than 256.
Strings created with "vec" can also be manipulated with the logical operators "|",
"&", "^", and "~". These operators will assume a bit vector operation is desired
when both operands are strings. See "Bitwise String Operators" in perlop.
The following code will build up an ASCII string saying 'PerlPerlPerl'. The
comments show the string after each step. Note that this code works in the same
way on big-endian or little-endian machines.
my $foo = '';
vec($foo, 0, 32) = 0x5065726C; # 'Perl'
# $foo eq "Perl" eq "\x50\x65\x72\x6C", 32 bits
print vec($foo, 0, 8); # prints 80 == 0x50 == ord('P')
vec($foo, 2, 16) = 0x5065; # 'PerlPe'
vec($foo, 3, 16) = 0x726C; # 'PerlPerl'
vec($foo, 8, 8) = 0x50; # 'PerlPerlP'
vec($foo, 9, 8) = 0x65; # 'PerlPerlPe'
vec($foo, 20, 4) = 2; # 'PerlPerlPe' . "\x02"
vec($foo, 21, 4) = 7; # 'PerlPerlPer'
# 'r' is "\x72"
vec($foo, 45, 2) = 3; # 'PerlPerlPer' . "\x0c"
vec($foo, 93, 1) = 1; # 'PerlPerlPer' . "\x2c"
vec($foo, 94, 1) = 1; # 'PerlPerlPerl'
# 'l' is "\x6c"
To transform a bit vector into a string or list of 0's and 1's, use these:
$bits = unpack("b*", $vector);
@bits = split(//, unpack("b*", $vector));
If you know the exact length in bits, it can be used in place of the "*".
Here is an example to illustrate how the bits actually fall in place:
#!/usr/bin/perl -wl
print <<'EOT';
0 1 2 3
unpack("V",$_) 01234567890123456789012345678901
------------------------------------------------------------------
EOT
for $w (0..3) {
$width = 2**$w;
for ($shift=0; $shift < $width; ++$shift) {
for ($off=0; $off < 32/$width; ++$off) {
$str = pack("B*", "0"x32);
$bits = (1<<$shift);
vec($str, $off, $width) = $bits;
$res = unpack("b*",$str);
$val = unpack("V", $str);
write;
}
}
}
format STDOUT =
vec($_,@#,@#) = @<< == @######### @>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
$off, $width, $bits, $val, $res
.
__END__
Regardless of the machine architecture on which it is run, the above example
should print the following table:
0 1 2 3
unpack("V",$_) 01234567890123456789012345678901
------------------------------------------------------------------
vec($_, 0, 1) = 1 == 1 10000000000000000000000000000000
vec($_, 1, 1) = 1 == 2 01000000000000000000000000000000
vec($_, 2, 1) = 1 == 4 00100000000000000000000000000000
vec($_, 3, 1) = 1 == 8 00010000000000000000000000000000
vec($_, 4, 1) = 1 == 16 00001000000000000000000000000000
vec($_, 5, 1) = 1 == 32 00000100000000000000000000000000
vec($_, 6, 1) = 1 == 64 00000010000000000000000000000000
vec($_, 7, 1) = 1 == 128 00000001000000000000000000000000
vec($_, 8, 1) = 1 == 256 00000000100000000000000000000000
vec($_, 9, 1) = 1 == 512 00000000010000000000000000000000
vec($_,10, 1) = 1 == 1024 00000000001000000000000000000000
vec($_,11, 1) = 1 == 2048 00000000000100000000000000000000
vec($_,12, 1) = 1 == 4096 00000000000010000000000000000000
vec($_,13, 1) = 1 == 8192 00000000000001000000000000000000
vec($_,14, 1) = 1 == 16384 00000000000000100000000000000000
vec($_,15, 1) = 1 == 32768 00000000000000010000000000000000
vec($_,16, 1) = 1 == 65536 00000000000000001000000000000000
vec($_,17, 1) = 1 == 131072 00000000000000000100000000000000
vec($_,18, 1) = 1 == 262144 00000000000000000010000000000000
vec($_,19, 1) = 1 == 524288 00000000000000000001000000000000
vec($_,20, 1) = 1 == 1048576 00000000000000000000100000000000
vec($_,21, 1) = 1 == 2097152 00000000000000000000010000000000
vec($_,22, 1) = 1 == 4194304 00000000000000000000001000000000
vec($_,23, 1) = 1 == 8388608 00000000000000000000000100000000
vec($_,24, 1) = 1 == 16777216 00000000000000000000000010000000
vec($_,25, 1) = 1 == 33554432 00000000000000000000000001000000
vec($_,26, 1) = 1 == 67108864 00000000000000000000000000100000
vec($_,27, 1) = 1 == 134217728 00000000000000000000000000010000
vec($_,28, 1) = 1 == 268435456 00000000000000000000000000001000
vec($_,29, 1) = 1 == 536870912 00000000000000000000000000000100
vec($_,30, 1) = 1 == 1073741824 00000000000000000000000000000010
vec($_,31, 1) = 1 == 2147483648 00000000000000000000000000000001
vec($_, 0, 2) = 1 == 1 10000000000000000000000000000000
vec($_, 1, 2) = 1 == 4 00100000000000000000000000000000
vec($_, 2, 2) = 1 == 16 00001000000000000000000000000000
vec($_, 3, 2) = 1 == 64 00000010000000000000000000000000
vec($_, 4, 2) = 1 == 256 00000000100000000000000000000000
vec($_, 5, 2) = 1 == 1024 00000000001000000000000000000000
vec($_, 6, 2) = 1 == 4096 00000000000010000000000000000000
vec($_, 7, 2) = 1 == 16384 00000000000000100000000000000000
vec($_, 8, 2) = 1 == 65536 00000000000000001000000000000000
vec($_, 9, 2) = 1 == 262144 00000000000000000010000000000000
vec($_,10, 2) = 1 == 1048576 00000000000000000000100000000000
vec($_,11, 2) = 1 == 4194304 00000000000000000000001000000000
vec($_,12, 2) = 1 == 16777216 00000000000000000000000010000000
vec($_,13, 2) = 1 == 67108864 00000000000000000000000000100000
vec($_,14, 2) = 1 == 268435456 00000000000000000000000000001000
vec($_,15, 2) = 1 == 1073741824 00000000000000000000000000000010
vec($_, 0, 2) = 2 == 2 01000000000000000000000000000000
vec($_, 1, 2) = 2 == 8 00010000000000000000000000000000
vec($_, 2, 2) = 2 == 32 00000100000000000000000000000000
vec($_, 3, 2) = 2 == 128 00000001000000000000000000000000
vec($_, 4, 2) = 2 == 512 00000000010000000000000000000000
vec($_, 5, 2) = 2 == 2048 00000000000100000000000000000000
vec($_, 6, 2) = 2 == 8192 00000000000001000000000000000000
vec($_, 7, 2) = 2 == 32768 00000000000000010000000000000000
vec($_, 8, 2) = 2 == 131072 00000000000000000100000000000000
vec($_, 9, 2) = 2 == 524288 00000000000000000001000000000000
vec($_,10, 2) = 2 == 2097152 00000000000000000000010000000000
vec($_,11, 2) = 2 == 8388608 00000000000000000000000100000000
vec($_,12, 2) = 2 == 33554432 00000000000000000000000001000000
vec($_,13, 2) = 2 == 134217728 00000000000000000000000000010000
vec($_,14, 2) = 2 == 536870912 00000000000000000000000000000100
vec($_,15, 2) = 2 == 2147483648 00000000000000000000000000000001
vec($_, 0, 4) = 1 == 1 10000000000000000000000000000000
vec($_, 1, 4) = 1 == 16 00001000000000000000000000000000
vec($_, 2, 4) = 1 == 256 00000000100000000000000000000000
vec($_, 3, 4) = 1 == 4096 00000000000010000000000000000000
vec($_, 4, 4) = 1 == 65536 00000000000000001000000000000000
vec($_, 5, 4) = 1 == 1048576 00000000000000000000100000000000
vec($_, 6, 4) = 1 == 16777216 00000000000000000000000010000000
vec($_, 7, 4) = 1 == 268435456 00000000000000000000000000001000
vec($_, 0, 4) = 2 == 2 01000000000000000000000000000000
vec($_, 1, 4) = 2 == 32 00000100000000000000000000000000
vec($_, 2, 4) = 2 == 512 00000000010000000000000000000000
vec($_, 3, 4) = 2 == 8192 00000000000001000000000000000000
vec($_, 4, 4) = 2 == 131072 00000000000000000100000000000000
vec($_, 5, 4) = 2 == 2097152 00000000000000000000010000000000
vec($_, 6, 4) = 2 == 33554432 00000000000000000000000001000000
vec($_, 7, 4) = 2 == 536870912 00000000000000000000000000000100
vec($_, 0, 4) = 4 == 4 00100000000000000000000000000000
vec($_, 1, 4) = 4 == 64 00000010000000000000000000000000
vec($_, 2, 4) = 4 == 1024 00000000001000000000000000000000
vec($_, 3, 4) = 4 == 16384 00000000000000100000000000000000
vec($_, 4, 4) = 4 == 262144 00000000000000000010000000000000
vec($_, 5, 4) = 4 == 4194304 00000000000000000000001000000000
vec($_, 6, 4) = 4 == 67108864 00000000000000000000000000100000
vec($_, 7, 4) = 4 == 1073741824 00000000000000000000000000000010
vec($_, 0, 4) = 8 == 8 00010000000000000000000000000000
vec($_, 1, 4) = 8 == 128 00000001000000000000000000000000
vec($_, 2, 4) = 8 == 2048 00000000000100000000000000000000
vec($_, 3, 4) = 8 == 32768 00000000000000010000000000000000
vec($_, 4, 4) = 8 == 524288 00000000000000000001000000000000
vec($_, 5, 4) = 8 == 8388608 00000000000000000000000100000000
vec($_, 6, 4) = 8 == 134217728 00000000000000000000000000010000
vec($_, 7, 4) = 8 == 2147483648 00000000000000000000000000000001
vec($_, 0, 8) = 1 == 1 10000000000000000000000000000000
vec($_, 1, 8) = 1 == 256 00000000100000000000000000000000
vec($_, 2, 8) = 1 == 65536 00000000000000001000000000000000
vec($_, 3, 8) = 1 == 16777216 00000000000000000000000010000000
vec($_, 0, 8) = 2 == 2 01000000000000000000000000000000
vec($_, 1, 8) = 2 == 512 00000000010000000000000000000000
vec($_, 2, 8) = 2 == 131072 00000000000000000100000000000000
vec($_, 3, 8) = 2 == 33554432 00000000000000000000000001000000
vec($_, 0, 8) = 4 == 4 00100000000000000000000000000000
vec($_, 1, 8) = 4 == 1024 00000000001000000000000000000000
vec($_, 2, 8) = 4 == 262144 00000000000000000010000000000000
vec($_, 3, 8) = 4 == 67108864 00000000000000000000000000100000
vec($_, 0, 8) = 8 == 8 00010000000000000000000000000000
vec($_, 1, 8) = 8 == 2048 00000000000100000000000000000000
vec($_, 2, 8) = 8 == 524288 00000000000000000001000000000000
vec($_, 3, 8) = 8 == 134217728 00000000000000000000000000010000
vec($_, 0, 8) = 16 == 16 00001000000000000000000000000000
vec($_, 1, 8) = 16 == 4096 00000000000010000000000000000000
vec($_, 2, 8) = 16 == 1048576 00000000000000000000100000000000
vec($_, 3, 8) = 16 == 268435456 00000000000000000000000000001000
vec($_, 0, 8) = 32 == 32 00000100000000000000000000000000
vec($_, 1, 8) = 32 == 8192 00000000000001000000000000000000
vec($_, 2, 8) = 32 == 2097152 00000000000000000000010000000000
vec($_, 3, 8) = 32 == 536870912 00000000000000000000000000000100
vec($_, 0, 8) = 64 == 64 00000010000000000000000000000000
vec($_, 1, 8) = 64 == 16384 00000000000000100000000000000000
vec($_, 2, 8) = 64 == 4194304 00000000000000000000001000000000
vec($_, 3, 8) = 64 == 1073741824 00000000000000000000000000000010
vec($_, 0, 8) = 128 == 128 00000001000000000000000000000000
vec($_, 1, 8) = 128 == 32768 00000000000000010000000000000000
vec($_, 2, 8) = 128 == 8388608 00000000000000000000000100000000
vec($_, 3, 8) = 128 == 2147483648 00000000000000000000000000000001
wait Behaves like the wait(2) system call on your system: it waits for a child process
to terminate and returns the pid of the deceased process, or "-1" if there are no
child processes. The status is returned in $? and "{^CHILD_ERROR_NATIVE}". Note
that a return value of "-1" could mean that child processes are being
automatically reaped, as described in perlipc.
waitpid PID,FLAGS
Waits for a particular child process to terminate and returns the pid of the
deceased process, or "-1" if there is no such child process. On some systems, a
value of 0 indicates that there are processes still running. The status is
returned in $? and "{^CHILD_ERROR_NATIVE}". If you say
use POSIX ":sys_wait_h";
#...
do {
$kid = waitpid(-1, WNOHANG);
} while $kid > 0;
then you can do a non-blocking wait for all pending zombie processes. Non-
blocking wait is available on machines supporting either the waitpid(2) or
wait4(2) system calls. However, waiting for a particular pid with FLAGS of 0 is
implemented everywhere. (Perl emulates the system call by remembering the status
values of processes that have exited but have not been harvested by the Perl
script yet.)
Note that on some systems, a return value of "-1" could mean that child processes
are being automatically reaped. See perlipc for details, and for other examples.
wantarray
Returns true if the context of the currently executing subroutine or "eval" is
looking for a list value. Returns false if the context is looking for a scalar.
Returns the undefined value if the context is looking for no value (void context).
return unless defined wantarray; # don't bother doing more
my @a = complex_calculation();
return wantarray ? @a : "@a";
"wantarray()"'s result is unspecified in the top level of a file, in a "BEGIN",
"UNITCHECK", "CHECK", "INIT" or "END" block, or in a "DESTROY" method.
This function should have been named wantlist() instead.
warn LIST
Prints the value of LIST to STDERR. If the last element of LIST does not end in a
newline, it appends the same file/line number text as "die" does.
If LIST is empty and $@ already contains a value (typically from a previous eval)
that value is used after appending "\t...caught" to $@. This is useful for
staying almost, but not entirely similar to "die".
If $@ is empty then the string "Warning: Something's wrong" is used.
No message is printed if there is a $SIG{__WARN__} handler installed. It is the
handler's responsibility to deal with the message as it sees fit (like, for
instance, converting it into a "die"). Most handlers must therefore make
arrangements to actually display the warnings that they are not prepared to deal
with, by calling "warn" again in the handler. Note that this is quite safe and
will not produce an endless loop, since "__WARN__" hooks are not called from
inside one.
You will find this behavior is slightly different from that of $SIG{__DIE__}
handlers (which don't suppress the error text, but can instead call "die" again to
change it).
Using a "__WARN__" handler provides a powerful way to silence all warnings (even
the so-called mandatory ones). An example:
# wipe out *all* compile-time warnings
BEGIN { $SIG{'__WARN__'} = sub { warn $_[0] if $DOWARN } }
my $foo = 10;
my $foo = 20; # no warning about duplicate my $foo,
# but hey, you asked for it!
# no compile-time or run-time warnings before here
$DOWARN = 1;
# run-time warnings enabled after here
warn "\$foo is alive and $foo!"; # does show up
See perlvar for details on setting %SIG entries, and for more examples. See the
Carp module for other kinds of warnings using its carp() and cluck() functions.
write FILEHANDLE
write EXPR
write Writes a formatted record (possibly multi-line) to the specified FILEHANDLE, using
the format associated with that file. By default the format for a file is the one
having the same name as the filehandle, but the format for the current output
channel (see the "select" function) may be set explicitly by assigning the name of
the format to the $~ variable.
Top of form processing is handled automatically: if there is insufficient room on
the current page for the formatted record, the page is advanced by writing a form
feed, a special top-of-page format is used to format the new page header, and then
the record is written. By default the top-of-page format is the name of the
filehandle with "_TOP" appended, but it may be dynamically set to the format of
your choice by assigning the name to the $^ variable while the filehandle is
selected. The number of lines remaining on the current page is in variable "$-",
which can be set to 0 to force a new page.
If FILEHANDLE is unspecified, output goes to the current default output channel,
which starts out as STDOUT but may be changed by the "select" operator. If the
FILEHANDLE is an EXPR, then the expression is evaluated and the resulting string
is used to look up the name of the FILEHANDLE at run time. For more on formats,
see perlform.
Note that write is not the opposite of "read". Unfortunately.
y/// The transliteration operator. Same as "tr///". See perlop.
perl v5.10.0 2011-06-30 PERLFUNC(1)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2012-05-26 01:35 @38.107.179.240 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)