On Apache
Under GNU General Public License
2012-05-26 06:26 @38.107.179.236 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
SG_GET_CONFIG(8) SG3_UTILS SG_GET_CONFIG(8)
NAME
sg_get_config - sends a SCSI GET CONFIGURATION command
SYNOPSIS
sg_get_config [--brief] [--current] [--help] [--hex] [--inner-hex] [--list] [--rt=RT]
[--starting=FC] [--verbose] [--version] DEVICE
DESCRIPTION
Sends a SCSI GET CONFIGURATION command to DEVICE and decodes the response. The response
includes the features and profiles of the device. Typically these devices are CD and DVD
players that may (but not necessarily) have media in them. These devices may well be con-
nected via ATAPI, USB or IEEE 1394 transports. In such cases they are "SCSI" devices only
in the sense that they use the "Multi-Media command" set (MMC). MMC is a specialized SCSI
command set whose definition can be found at http://www.t10.org .
This utility is based on the MMC-4 and MMC-5 draft standards. See section 5 on "Features
and Profile for Multi_Media devices" for more information on specific feature parameters
and profiles. The manufacturer's product manual may also be useful.
Since modern DVD writers support many features and profiles, the decoded output from this
utility can be large. There are various ways to cut down the output. If the --brief option
is used only the feature names are shown and the feature parameters are not decoded.
Alternatively if only one feature is of interest then this combination of options is
appropriate: "--rt=2 --starting=FC". Another possibility is to show only the features that
are relevant to the media in the drive (i.e. "current") with the "--rt=1" option.
OPTIONS
Arguments to long options are mandatory for short options as well.
-b, --brief
show the feature names but don't decode the parameters of those features. When
used with --list outputs known feature names but not known profile names.
-c, --current
output features marked as current. This option is equivalent to '--rt=1'.
-h, --help
output the usage message then exit.
-H, --hex
output the response in hex (don't decode response).
-i, --inner-hex
decode to the feature name level then output each feature's data in hex.
-l, --list
list all known feature and profile names. Ignore the device name (if given). Sim-
ply lists the feature names and profiles (followed by their hex values) that this
utility knows about. If --brief is also given then only feature names are listed.
-r, --rt=RT
where RT is the field of that name in the GET CONFIGURATION cdb. Allowable values
are 0, 1, 2, or 3 . The command's action also depends on the value given to the
--starting=FC option. The default value is 0. When RT is 0 then all features,
regardless of currency, are returned (whose feature code is greater than or equal
to FC given to --starting=). When RT is 1 then all current features are returned
(whose feature code is greater than or equal to FC). When RT is 2 then the feature
whose feature code is equal to FC, if any, is returned. When RT is 3 the response
is reserved (probably yields an "illegal field in cdb" error). To simplify the
meanings of the RT values are:
0 : all features, current on not
1 : only current features
2 : only feature whose code is FC
3 : reserved
-s, --starting=FC
where FC is the feature code value. This option works closely with the --rt=RT
option. The FC value is in the range 0 to 65535 (0xffff) inclusive. Its default
value is 0. A value prefixed with "0x" (or a trailing 'h') is interpreted as hex-
adecimal.
-v, --verbose
increase the level of verbosity, (i.e. debug output).
-V, --version
print the version string and then exit.
NOTES
There are multiple versions of the MMC (draft) standards: MMC [1997], MMC-2 [2000], MMC-3
[2002], MMC-4 and MMC-5. The first three are now ANSI INCITS standards with the year they
became standards shown in brackets. The draft immediately prior to standardization can be
found at http://www.t10.org . In the initial MMC standard there was no GET CONFIGURATION
command and the relevant information was obtained from the "CD capabilities and mechanical
status mode page" (mode page 0x2a). It was later renamed the "MM capabilities and mechani-
cal status mode page" and has been made obsolete in MMC-4 and MMC-5. The GET CONFIGURATION
command was introduced in MMC-2 and has become a replacement for that mode page. New fea-
tures such as support for "BD" (blue ray) media type can only be found by using the GET
CONFIGURATION command. Hence older CD players may not support the GET CONFIGURATION com-
mand in which case the "MM capabilities ..." mode page can be checked with sdparm(8),
sginfo(8) or sg_modes(8).
In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic (sg) device. In the
2.6 series block devices can also be specified. For example "sg_get_config /dev/hdc" will
work in the 2.6 series kernels as long as /dev/hdc is an ATAPI device. In the 2.6 series
external DVD writers attached via USB could be queried with "sg_get_config /dev/scd1" for
example.
EXIT STATUS
The exit status of sg_get_config is 0 when it is successful. Otherwise see the
sg3_utils(8) man page.
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2004-2007 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SEE ALSO
sginfo(8), sg_modes(8), sg_inq(8), sg_prevent(8), sg_start(8) [all in sg3_utils],
sdparm(8)
sg3_utils-1.24 February 2007 SG_GET_CONFIG(8)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2012-05-26 06:26 @38.107.179.236 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)