On Apache
Under GNU General Public License
2012-05-26 06:28 @38.107.179.240 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
SG_VPD(8) SG3_UTILS SG_VPD(8)
NAME
sg_vpd - fetches Vital Product Data (VPD) pages using a SCSI INQUIRY command
SYNOPSIS
sg_vpd [--enumerate] [--help] [--hex] [--ident] [--long] [--page=PG] [--quiet] [--raw]
[--verbose] [--version] DEVICE
DESCRIPTION
This utility fetches a Vital Product Data page and decodes it or outputs it in ASCII hex-
adecimal or binary. VPD pages are fetched with a SCSI INQUIRY command.
Probably the most important page is the Device Identification VPD page (page number:
0x83). Since SPC-3, support for this page has been flagged as mandatory. This page can be
fetched by using the --ident option.
When no options are given, other than a DEVICE, then the "Supported VPD pages" (0x0) VPD
page is fetched and decoded.
OPTIONS
Arguments to long options are mandatory for short options as well.
-e, --enumerate
list the names of the known VPD pages, first the standard pages, then the vendor
specific pages. Each group is sorted in abbreviation order. The DEVICE and other
options are ignored and this utility exits afte listing the VPD page names.
-h, --help
outputs the usage message summarizing command line options then exits. Ignores
DEVICE if given.
-H, --hex
outputs the requested VPD page in ASCII hexadecimal. Can be used multiple times,
see section on the ATA information vpd page.
-i, --ident
decode the device identification (0x83) VPD page. When used once this option has
the same effect as '--page=di'. When use twice then the short form of the device
identification VPD page's logical unit designator is decoded. In the latter case
this option has the same effect as '--quiet --page=di_lu'.
-l, --long
when decoding some VPD pages, give a little more output. For example the ATA Infor-
mation VPD page only shows the signature (in hex) and the IDENTIFY (PACKET) DEVICE
(in hex) when this option is given.
-p, --page=PG
where PG is the VPD page to be decoded or output. The PG argument can either be an
abbreviation, a number or a pair or numbers separated by a comma. The VPD page
abbreviations can be seen by using the --enumerate option. If a number is given it
is assumed to be decimal unless it has a hexadecimal indicator which is either a
leading '0x' or a trailing 'h'. If one number is given then it is assumed to be a
VPD page number. If two numbers are given the second number indicates which vendor
specific VPD page to decode when several pages share the same VPD page number. If
this option is not given (nor '-i', '-l' nor '-V') then the "Supported VPD pages"
(0x0) VPD page is fetched and decoded.
-q, --quiet
suppress the amount of decoding output.
-r, --raw
output requested VPD page in binary. The output should be piped to a file or
another utility when this option is used. The binary is sent to stdout, and errors
are sent to stderr.
-v, --verbose
increases the level or verbosity.
-V, --version
print out version string then exit.
ATA INFORMATION VPD PAGE
This VPD page (0x89 or 'ai') is defined by the SCSI to ATA Translation standard. It con-
tains information about the SAT layer, the "signature" of the ATA device and the response
to the ATA IDENTIFY (PACKET) DEVICE command. The latter part has 512 bytes of identity,
capability and settings data which the hdparm utility is capable of decoding (so this
utility doesn't decode it).
To unclutter the output for this page, the signature and the IDENTIFY (PACKET) DEVICE
response are not output unless the --long option (or --hex or --raw) are given. When the
--long option is given the IDENTIFY (PACKET) DEVICE response is output as 256 (16 bit)
words as is the fashion for ATA devices. To see that response as a string of bytes use the
'-HH' option. To format the output suitable for hdparm to decode use either the '-HHH' or
'-rr' option. For example if 'dev/sdb' is a SATA disk behind a SAT layer then this com-
mand: 'sg_vpd -p ai -HHH /dev/sdb | hdparm --Istdin' should decode the ATA IDENTIFY
(PACKET) DEVICE response.
NOTES
In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic (sg) device. In the
2.6 series block devices (e.g. disks and ATAPI DVDs) can also be specified. For example
"sg_inq /dev/sda" will work in the 2.6 series kernels. From lk 2.6.6 other SCSI "char"
device names may be used as well (e.g. "/dev/st0m").
EXIT STATUS
The exit status of sg_vpd is 0 when it is successful. Otherwise see the sg3_utils(8) man
page.
AUTHOR
Written by Doug Gilbert
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2006-2007 Douglas Gilbert
This software is distributed under a FreeBSD license. There is NO warranty; not even for
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SEE ALSO
sg_inq(sg3_utils), sdparm(sdparm), hdparm(hdparm)
sg3_utils-1.24 April 2007 SG_VPD(8)
Generated by $Id: phpMan.php,v 4.49 2006/02/26 13:18:18 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2012-05-26 06:28 @38.107.179.240 Crawled by CCBot/1.0 (+http://www.commoncrawl.org/bot.html)